Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.20155 · Applied Physics Letters

Probing tunable Kerr nonlinearity in graphene Josephson junctions

Priyanka Samanta, Joydip Sarkar, Ashish Abhraham Samuel, Madhavi Chand, Kenji Watanabe, Takashi Taniguchi, Mandar M. Deshmukh

Published Sep 28, 2026• 1 citation
arXivHTMLPDF

Abstract

Josephson junction (JJ) is a key nonlinear element in superconducting devices such as qubits, amplifiers, and bolometers. Recently, gate-tunable JJs based on graphene and semiconductors have gained interest due to their rich Andreev physics and wide applications in circuit quantum electrodynamics devices. In addition to gate tunability, it offers many advantages over conventional JJs, such as exceptional thermal properties for bolometric sensors, magnetic-field compatibility, and operability at elevated temperatures above 1 K. Like conventional Al–AlOx–Al JJs, graphene JJs also act as nonlinear inductors, and at their heart lies the Kerr nonlinearity. Additionally, in graphene JJs, the nonlinearity is tunable via external knobs in a single device. However, a detailed experimental exploration of the tunable Kerr nonlinearity in graphene JJs has never been performed. In this work, we study the dependence of the Kerr nonlinearity on gate voltage, temperature, and DC bias—an interesting knob that has been less explored. Using these parameters, we show that the magnitude of the Kerr coefficient can be tuned over a wide range, from ∼200 kHz to 1.2 MHz. Our work will be a valuable resource for further understanding of the nonlinearity in graphene JJs and for the design of next-generation amplifiers and sensors, with enhanced performance.

DOI
10.1063/5.0344221

Related papers

Quantum noise limited microwave amplification using a graphene Josephson junction

Joydip Sarkar, Kishor V. Salunkhe, Supriya Mandal +7 more

Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.

arXiv:2204.02103•Apr 5, 2022•5 citations

A ballistic graphene superconducting microwave circuit

Felix E. Schmidt, Mark D. Jenkins, Kenji Watanabe +2 more

Josephson junctions (JJ) are a fundamental component of microwave quantum circuits, such as tunable cavities, qubits, and parametric amplifiers. Recently developed encapsulated graphene JJs, with supercurrents extending over micron distance scales, have exciting potential applications as a new building block for quantum circuits. Despite this, the microwave performance of this technology has not been explored. Here, we demonstrate a microwave circuit based on a ballistic graphene JJ embedded in a superconducting cavity. We directly observe a gate-tunable Josephson inductance through the resonance frequency of the device and, using a detailed RF model, we extract this inductance quantitatively. We also observe the microwave losses of the device, and translate this into sub-gap resistances of the junction at μeV energy scales, not accessible in DC measurements. The microwave performance we observe here suggests that graphene Josephson junctions are a feasible platform for implementing coherent quantum circuits.

arXiv:1806.11389•Nature Communications•Sep 28, 2018•75 citations

Kerr non-linearity enhances the response of a graphene Josephson bolometer

Joydip Sarkar, Krishnendu Maji, Abhishek Sunamudi +8 more

Bolometers are radiation sensors that are central to wide areas such as dark matter search, radio astronomy, material science, and qubit readouts, among others. There have been different kinds of bolometer realizations in the recent past. The challenge is to have a single device that combines high sensitivity, broad bandwidth, and a fast readout scheme. Here we demonstrate the usage of Josephson parametric amplifiers (JPA) as highly sensitive bolometers. Our key finding is that the Kerr non-linearity of the JPA boosts the device’s sensitivity. When the bolometer is biased in the non-linear regime, it enhances the up-converted signals (~100 times), resulting in an order of magnitude improvement in sensitivity compared to the linear regime. In the non-linear biasing, we achieve a NEP ~ 500 aW/ $$\sqrt{{{{\rm{Hz}}}}}$$ . Our device offers a fast detection scheme with a thermal time constant of 4.26 μs and an intrinsic JPA time constant of 70 ns. Our work integrates a JPA into a bolometer, enabling a fast and sensitive operation compared to previously studied graphene-based bolometers. Our study demonstrates a way forward to improve the quantum sensors based on 2D materials by leveraging the inherent non-linear response. Graphene-based Josephson junction bolometers hold promise as sensitive single-photon detectors, but they are normally limited by slow readout schemes and narrow operational bandwidths. Here, the authors report the application of Josephson parametric amplifiers as fast, tunable bolometers with sensitivity enhanced by the intrinsic Kerr non-linearity.

arXiv:2502.04911•Nature Communications•Jul 31, 2025•7 citations

Dissipationless nonlinearity in quantum material Josephson diodes

Constantin Schrade, Valla Fatemi

Dissipationless nonlinearities for three-wave mixing are a key component of many superconducting quantum devices, such as amplifiers and bosonic qubits. So far, such third-order nonlinearities have been primarily achieved with circuits of concatenated Josephson tunnel junctions. In this work, we theoretically develop an alternative approach to realize third-order nonlinearities from gate-tunable and intrinsically symmetry-broken quantum material Josephson junctions. We illustrate this approach on two examples, an Andreev interferometer and a magnetic Josephson junction. Our results show that both setups enable Kerr-free three-wave mixing for a broad range of frequencies, an attribute that is highly desirable for amplifier applications. Moreover, we also find that the magnetic junction constitutes a paradigmatic example for three-wave mixing in a minimal single-junction device without the need for any external biases. We hope that our work will guide the search of dissipationless nonlinearities in quantum material superconducting devices and inspire other ways of characterizing symmetry breaking in quantum materials with microwave techniques.

arXiv:2310.12198•Physical Review Applied•Jun 12, 2024•16 citations

Josephson-kanavatransistori-pohjaisten parametrivahvistimien suunnittelu ja simulaatio

Juulia Kirjavainen

Cryogenic, ultralow-noise microwave amplification is critical in superconducting qubit readout, microwave detection, and space technology. Josephson parametric amplifiers (JPAs) are widely used in microwave amplification. Parametric amplification occurs because a nonlinear element and a strong pump enable frequency mixing. The core component of a JPA is a Josephson junction, which acts as a nonlinear inductor and is formed by a thin layer of insulator or normal metal sandwiched between two superconductors. However, gate-controlled Josephson field-effect transistors (JoFETs) have been less studied in this context. In particular, graphene-based JoFETs have shown promising results in terms of scalability and electrostatic control, which could provide an alternative to magnetic field control. The aim of this thesis is to study graphene-based JoFETs as a nonlinear element in superconducting parametric amplifiers. The study was carried out as a literature review and circuit-level simulations using Keysight Advanced Design System (ADS) software. At first, an LC resonator-based JPA was implemented, in which the nonlinear element was a Verilog-A model of a nonlinear Josephson inductance. Harmonic balance (HB) simulation was performed to study the bandwidth, and gain as a function of signal frequency and the dependence on pump power. It showed that parametric gain occurs only when the pump is on. 30 dB gain and 290 MHz bandwidth were achieved. As the gain increased, the bandwidth became narrower. Finally, a gate-pumped JPA using a JoFET was simulated. The JoFET was implemented using a Verilog-A model, which was based on measurements by VTT of their graphene JoFETs. HB simulations showed the electrostatic control of the gate-pumped JPA and gain-bandwidth trade-off typical of JPAs. 15–35 dB gain and 150 MHz bandwidth were obtained, and the resonance frequency could be adjusted with the DC gate voltage. Overall, the observed behavior corresponds well with the reported results for JPAs and fabricated JoFET JPAs. These findings suggest that graphene JoFETs enable parametric gain that can be controlled electrostatically. Although their noise levels may not meet the requirements of quantum computers, they could be useful in other demanding applications, such as space technology.

•Dec 11, 2025•0 citations

Superconducting Resonators with Voltage-Controlled Frequency and Nonlinearity

William M. Strickland, Bassel Heiba Elfeky, Joseph O’Connell Yuan +6 more

Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated $\mathrm{In}\mathrm{As}$-$\mathrm{Al}$ Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the $\mathrm{In}\mathrm{As}$-$\mathrm{Al}$ junction is nondissipative as is the case with conventional ${\mathrm{Al}\mathrm{O}}_{\mathrm{x}}\text{-Al}$ junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over $2\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}$. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of $51\phantom{\rule{0.2em}{0ex}}\mathrm{MHz}$. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.

arXiv:2210.02491•Physical Review Applied•Mar 7, 2023•33 citations
Josephson junction (JJ) is a key nonlinear element in superconducting devices such as qubits, amplifiers, and bolometers. Recently, gate-tunable JJs based on graphene and semiconductors have gained interest due to their rich Andreev physics and wide applications in circuit quantum electrodynamics devices. In addition to gate tunability, it offers many advantages over conventional JJs, such as exceptional thermal properties for bolometric sensors, magnetic-field compatibility, and operability at elevated temperatures above 1 K. Like conventional Al–AlOx–Al JJs, graphene JJs also act as nonlinear inductors, and at their heart lies the Kerr nonlinearity. Additionally, in graphene JJs, the nonlinearity is tunable via external knobs in a single device. However, a detailed experimental exploration of the tunable Kerr nonlinearity in graphene JJs has never been performed. In this work, we study the dependence of the Kerr nonlinearity on gate voltage, temperature, and DC bias—an interesting knob that has been less explored. Using these parameters, we show that the magnitude of the Kerr coefficient can be tuned over a wide range, from ∼200 kHz to 1.2 MHz. Our work will be a valuable resource for further understanding of the nonlinearity in graphene JJs and for the design of next-generation amplifiers and sensors, with enhanced performance.
Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.
Josephson junctions (JJ) are a fundamental component of microwave quantum circuits, such as tunable cavities, qubits, and parametric amplifiers. Recently developed encapsulated graphene JJs, with supercurrents extending over micron distance scales, have exciting potential applications as a new building block for quantum circuits. Despite this, the microwave performance of this technology has not been explored. Here, we demonstrate a microwave circuit based on a ballistic graphene JJ embedded in a superconducting cavity. We directly observe a gate-tunable Josephson inductance through the resonance frequency of the device and, using a detailed RF model, we extract this inductance quantitatively. We also observe the microwave losses of the device, and translate this into sub-gap resistances of the junction at μeV energy scales, not accessible in DC measurements. The microwave performance we observe here suggests that graphene Josephson junctions are a feasible platform for implementing coherent quantum circuits.
Bolometers are radiation sensors that are central to wide areas such as dark matter search, radio astronomy, material science, and qubit readouts, among others. There have been different kinds of bolometer realizations in the recent past. The challenge is to have a single device that combines high sensitivity, broad bandwidth, and a fast readout scheme. Here we demonstrate the usage of Josephson parametric amplifiers (JPA) as highly sensitive bolometers. Our key finding is that the Kerr non-linearity of the JPA boosts the device’s sensitivity. When the bolometer is biased in the non-linear regime, it enhances the up-converted signals (~100 times), resulting in an order of magnitude improvement in sensitivity compared to the linear regime. In the non-linear biasing, we achieve a NEP ~ 500 aW/ Hz\sqrt{{{{\rm{Hz}}}}}Hz​ . Our device offers a fast detection scheme with a thermal time constant of 4.26 μs and an intrinsic JPA time constant of 70 ns. Our work integrates a JPA into a bolometer, enabling a fast and sensitive operation compared to previously studied graphene-based bolometers. Our study demonstrates a way forward to improve the quantum sensors based on 2D materials by leveraging the inherent non-linear response. Graphene-based Josephson junction bolometers hold promise as sensitive single-photon detectors, but they are normally limited by slow readout schemes and narrow operational bandwidths. Here, the authors report the application of Josephson parametric amplifiers as fast, tunable bolometers with sensitivity enhanced by the intrinsic Kerr non-linearity.
Dissipationless nonlinearities for three-wave mixing are a key component of many superconducting quantum devices, such as amplifiers and bosonic qubits. So far, such third-order nonlinearities have been primarily achieved with circuits of concatenated Josephson tunnel junctions. In this work, we theoretically develop an alternative approach to realize third-order nonlinearities from gate-tunable and intrinsically symmetry-broken quantum material Josephson junctions. We illustrate this approach on two examples, an Andreev interferometer and a magnetic Josephson junction. Our results show that both setups enable Kerr-free three-wave mixing for a broad range of frequencies, an attribute that is highly desirable for amplifier applications. Moreover, we also find that the magnetic junction constitutes a paradigmatic example for three-wave mixing in a minimal single-junction device without the need for any external biases. We hope that our work will guide the search of dissipationless nonlinearities in quantum material superconducting devices and inspire other ways of characterizing symmetry breaking in quantum materials with microwave techniques.
Cryogenic, ultralow-noise microwave amplification is critical in superconducting qubit readout, microwave detection, and space technology. Josephson parametric amplifiers (JPAs) are widely used in microwave amplification. Parametric amplification occurs because a nonlinear element and a strong pump enable frequency mixing. The core component of a JPA is a Josephson junction, which acts as a nonlinear inductor and is formed by a thin layer of insulator or normal metal sandwiched between two superconductors. However, gate-controlled Josephson field-effect transistors (JoFETs) have been less studied in this context. In particular, graphene-based JoFETs have shown promising results in terms of scalability and electrostatic control, which could provide an alternative to magnetic field control. The aim of this thesis is to study graphene-based JoFETs as a nonlinear element in superconducting parametric amplifiers. The study was carried out as a literature review and circuit-level simulations using Keysight Advanced Design System (ADS) software. At first, an LC resonator-based JPA was implemented, in which the nonlinear element was a Verilog-A model of a nonlinear Josephson inductance. Harmonic balance (HB) simulation was performed to study the bandwidth, and gain as a function of signal frequency and the dependence on pump power. It showed that parametric gain occurs only when the pump is on. 30 dB gain and 290 MHz bandwidth were achieved. As the gain increased, the bandwidth became narrower. Finally, a gate-pumped JPA using a JoFET was simulated. The JoFET was implemented using a Verilog-A model, which was based on measurements by VTT of their graphene JoFETs. HB simulations showed the electrostatic control of the gate-pumped JPA and gain-bandwidth trade-off typical of JPAs. 15–35 dB gain and 150 MHz bandwidth were obtained, and the resonance frequency could be adjusted with the DC gate voltage. Overall, the observed behavior corresponds well with the reported results for JPAs and fabricated JoFET JPAs. These findings suggest that graphene JoFETs enable parametric gain that can be controlled electrostatically. Although their noise levels may not meet the requirements of quantum computers, they could be useful in other demanding applications, such as space technology.
Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated InAs\mathrm{In}\mathrm{As}InAs-Al\mathrm{Al}Al Josephson junction to a coplanar waveguide resonator, we demonstrate the use of a superconducting element with wideband gate tunability. We show that the resonant frequency is controlled via a gate-tunable Josephson inductance and that the nonlinearity of the InAs\mathrm{In}\mathrm{As}InAs-Al\mathrm{Al}Al junction is nondissipative as is the case with conventional AlOx-Al{\mathrm{Al}\mathrm{O}}_{\mathrm{x}}\text{-Al}AlOx​-Al junctions. As the gate voltage is decreased, the inductive participation of the junction increases up to $44\mathrm{%}$, resulting in the resonant frequency being tuned by over 2GHz2\phantom{\rule{0.2em}{0ex}}\mathrm{GHz}2GHz. Utilizing the wide tunability of the device, we demonstrate that two resonant modes can be adjusted such that they strongly hybridize, exhibiting an avoided-level crossing with a coupling strength of 51MHz51\phantom{\rule{0.2em}{0ex}}\mathrm{MHz}51MHz. Implementing such voltage-tunable resonators is the first step toward realizing wafer-scale continuous voltage control in superconducting circuits for qubit-qubit coupling, quantum limited amplifiers, and quantum memory platforms.