Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2310.12198 · Physical Review Applied

Dissipationless nonlinearity in quantum material Josephson diodes

Constantin Schrade, Valla Fatemi

Published Jun 12, 2024• 16 citations
arXivHTMLPDF

Abstract

Dissipationless nonlinearities for three-wave mixing are a key component of many superconducting quantum devices, such as amplifiers and bosonic qubits. So far, such third-order nonlinearities have been primarily achieved with circuits of concatenated Josephson tunnel junctions. In this work, we theoretically develop an alternative approach to realize third-order nonlinearities from gate-tunable and intrinsically symmetry-broken quantum material Josephson junctions. We illustrate this approach on two examples, an Andreev interferometer and a magnetic Josephson junction. Our results show that both setups enable Kerr-free three-wave mixing for a broad range of frequencies, an attribute that is highly desirable for amplifier applications. Moreover, we also find that the magnetic junction constitutes a paradigmatic example for three-wave mixing in a minimal single-junction device without the need for any external biases. We hope that our work will guide the search of dissipationless nonlinearities in quantum material superconducting devices and inspire other ways of characterizing symmetry breaking in quantum materials with microwave techniques.

DOI
10.1103/physrevapplied.21.064029

Related papers

Three-wave mixing in the GHz range with Josephson junctions and resonators

Nicolas Roch, Emmanuel Flurin, F. Mallet +2 more

Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and show preliminary results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.

•Feb 20, 2012•0 citations

Three-wave mixing of microwave photons with Josephson junctions and resonators

Emmanuel Flurin, Nicolas Roch, Philippe Campagne-Ibarcq +3 more

Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and present results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.

•Mar 19, 2012•0 citations

Kerr nonlinearity and parametric amplification with an Al-InAs superconductor–semiconductor Josephson junction

Z. Hao, T. Shaw, Mehdi Hatefipour +5 more

Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.

arXiv:2402.11085•Applied Physics Letters•Jun 17, 2024•14 citations

Probing tunable Kerr nonlinearity in graphene Josephson junctions

Priyanka Samanta, Joydip Sarkar, Ashish Abhraham Samuel +4 more

Josephson junction (JJ) is a key nonlinear element in superconducting devices such as qubits, amplifiers, and bolometers. Recently, gate-tunable JJs based on graphene and semiconductors have gained interest due to their rich Andreev physics and wide applications in circuit quantum electrodynamics devices. In addition to gate tunability, it offers many advantages over conventional JJs, such as exceptional thermal properties for bolometric sensors, magnetic-field compatibility, and operability at elevated temperatures above 1 K. Like conventional Al–AlOx–Al JJs, graphene JJs also act as nonlinear inductors, and at their heart lies the Kerr nonlinearity. Additionally, in graphene JJs, the nonlinearity is tunable via external knobs in a single device. However, a detailed experimental exploration of the tunable Kerr nonlinearity in graphene JJs has never been performed. In this work, we study the dependence of the Kerr nonlinearity on gate voltage, temperature, and DC bias—an interesting knob that has been less explored. Using these parameters, we show that the magnitude of the Kerr coefficient can be tuned over a wide range, from ∼200 kHz to 1.2 MHz. Our work will be a valuable resource for further understanding of the nonlinearity in graphene JJs and for the design of next-generation amplifiers and sensors, with enhanced performance.

arXiv:2605.20155•Applied Physics Letters•Sep 28, 2026•1 citation

Gate tunability and nonlinearity in hybrid superconductor-semiconductor resonators

Vittorio Buccheri

Superconducting microwave resonators and Josephson elements form the basis of a broad range of quantum information technologies, including circuit quantum electrodynamics, Josephson parametric amplification, bosonic quantum computing, and engineered interactions between microwave modes. The properties of these circuits are largely determined by material parameters and design geometry, while magnetic flux often provides a means of in situ control. Electrostatic gating offers an additional degree of freedom, motivating the investigation of gate-tunable superconducting circuits, particularly through the integration of superconductors with semiconductor elements.In this thesis, we investigate the gate tunability and nonlinear response of superconducting microwave resonators incorporating indium arsenide (InAs) nanowires with epitaxial aluminum (Al) shells. We explore two distinct forms of gate control in this platform: the modification of the superconducting properties of the Al shell and the electrostatic tuning of Andreev bound states (ABSs) in Josephson weak links defined in the InAs core.We characterize the first form of gate control by measuring the gate-induced changes in resonator frequency and internal losses. We demonstrate that the observed response is well described by the Mattis--Bardeen model using an effective-temperature approach, consistent with an increase in quasiparticle population. Time-domain and modulation measurements further reveal characteristic response times down to a few tens of nanoseconds, highlighting the potential of this mechanism for applications in cryogenic switching and superconducting electronics.We then investigate the ABS--resonator interaction in both the linear and nonlinear regimes, demonstrating coupling strengths approaching the ultrastrong-coupling regime and, most notably, gate and flux control over the ABS-induced Kerr and cubic nonlinearities. In particular, we show that the Kerr contribution can be tuned through zero while maintaining a finite cubic nonlinearity, and observe three-wave-mixing parametric amplification. These findings are particularly relevant for applications requiring three-wave mixing with suppressed Kerr effects, such as Josephson parametric amplification.Together, these results demonstrate the potential of hybrid superconductor--semiconductor devices for engineering gate-tunable microwave circuits and controlling their linear and nonlinear response.

•Nov 3, 2026•0 citations

Kerr nonlinearity and three-wave mixing in superconducting resonators hosting Al-InAs weak links

Vittorio Buccheri, Ivo P. C. Cools, Nermin Trnjanin +6 more

Nonlinear microwave resonators are a versatile tool in quantum information processing, enabling parametric amplification, continuous variable quantum computing, and engineered mode interactions. Many of these applications especially benefit from cubic nonlinearities enabling three-wave mixing; at the same time, they are limited by quartic nonlinearities giving rise to undesired Kerr effects. A recurrent challenge is therefore to engineer resonators with a finite cubic nonlinearity while suppressing quartic terms. Here, we investigate a superconducting resonator hosting two weak links fabricated from an aluminum-capped indium arsenide nanowire. We characterize the Kerr nonlinearity as a function of magnetic flux and gate bias, showing that it can be tuned to zero with either control parameter. Furthermore, we experimentally demonstrate three-wave mixing in a semiconductor-superconductor hybrid device, establishing nonzero cubic nonlinearity. An effective model based on Andreev bound states qualitatively captures the observed trends. Our results validate semiconductor-superconductor hybrid devices as a promising platform for tunable nonlinear superconducting circuits, with applications in parametric amplification, quantum control of bosonic modes, and engineering interactions between microwave modes.

quant-pharXiv:2608.28428•Aug 31, 2026•2 citations
Dissipationless nonlinearities for three-wave mixing are a key component of many superconducting quantum devices, such as amplifiers and bosonic qubits. So far, such third-order nonlinearities have been primarily achieved with circuits of concatenated Josephson tunnel junctions. In this work, we theoretically develop an alternative approach to realize third-order nonlinearities from gate-tunable and intrinsically symmetry-broken quantum material Josephson junctions. We illustrate this approach on two examples, an Andreev interferometer and a magnetic Josephson junction. Our results show that both setups enable Kerr-free three-wave mixing for a broad range of frequencies, an attribute that is highly desirable for amplifier applications. Moreover, we also find that the magnetic junction constitutes a paradigmatic example for three-wave mixing in a minimal single-junction device without the need for any external biases. We hope that our work will guide the search of dissipationless nonlinearities in quantum material superconducting devices and inspire other ways of characterizing symmetry breaking in quantum materials with microwave techniques.
Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and show preliminary results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.
Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and present results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.
Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.
Josephson junction (JJ) is a key nonlinear element in superconducting devices such as qubits, amplifiers, and bolometers. Recently, gate-tunable JJs based on graphene and semiconductors have gained interest due to their rich Andreev physics and wide applications in circuit quantum electrodynamics devices. In addition to gate tunability, it offers many advantages over conventional JJs, such as exceptional thermal properties for bolometric sensors, magnetic-field compatibility, and operability at elevated temperatures above 1 K. Like conventional Al–AlOx–Al JJs, graphene JJs also act as nonlinear inductors, and at their heart lies the Kerr nonlinearity. Additionally, in graphene JJs, the nonlinearity is tunable via external knobs in a single device. However, a detailed experimental exploration of the tunable Kerr nonlinearity in graphene JJs has never been performed. In this work, we study the dependence of the Kerr nonlinearity on gate voltage, temperature, and DC bias—an interesting knob that has been less explored. Using these parameters, we show that the magnitude of the Kerr coefficient can be tuned over a wide range, from ∼200 kHz to 1.2 MHz. Our work will be a valuable resource for further understanding of the nonlinearity in graphene JJs and for the design of next-generation amplifiers and sensors, with enhanced performance.
Superconducting microwave resonators and Josephson elements form the basis of a broad range of quantum information technologies, including circuit quantum electrodynamics, Josephson parametric amplification, bosonic quantum computing, and engineered interactions between microwave modes. The properties of these circuits are largely determined by material parameters and design geometry, while magnetic flux often provides a means of in situ control. Electrostatic gating offers an additional degree of freedom, motivating the investigation of gate-tunable superconducting circuits, particularly through the integration of superconductors with semiconductor elements.In this thesis, we investigate the gate tunability and nonlinear response of superconducting microwave resonators incorporating indium arsenide (InAs) nanowires with epitaxial aluminum (Al) shells. We explore two distinct forms of gate control in this platform: the modification of the superconducting properties of the Al shell and the electrostatic tuning of Andreev bound states (ABSs) in Josephson weak links defined in the InAs core.We characterize the first form of gate control by measuring the gate-induced changes in resonator frequency and internal losses. We demonstrate that the observed response is well described by the Mattis--Bardeen model using an effective-temperature approach, consistent with an increase in quasiparticle population. Time-domain and modulation measurements further reveal characteristic response times down to a few tens of nanoseconds, highlighting the potential of this mechanism for applications in cryogenic switching and superconducting electronics.We then investigate the ABS--resonator interaction in both the linear and nonlinear regimes, demonstrating coupling strengths approaching the ultrastrong-coupling regime and, most notably, gate and flux control over the ABS-induced Kerr and cubic nonlinearities. In particular, we show that the Kerr contribution can be tuned through zero while maintaining a finite cubic nonlinearity, and observe three-wave-mixing parametric amplification. These findings are particularly relevant for applications requiring three-wave mixing with suppressed Kerr effects, such as Josephson parametric amplification.Together, these results demonstrate the potential of hybrid superconductor--semiconductor devices for engineering gate-tunable microwave circuits and controlling their linear and nonlinear response.
Nonlinear microwave resonators are a versatile tool in quantum information processing, enabling parametric amplification, continuous variable quantum computing, and engineered mode interactions. Many of these applications especially benefit from cubic nonlinearities enabling three-wave mixing; at the same time, they are limited by quartic nonlinearities giving rise to undesired Kerr effects. A recurrent challenge is therefore to engineer resonators with a finite cubic nonlinearity while suppressing quartic terms. Here, we investigate a superconducting resonator hosting two weak links fabricated from an aluminum-capped indium arsenide nanowire. We characterize the Kerr nonlinearity as a function of magnetic flux and gate bias, showing that it can be tuned to zero with either control parameter. Furthermore, we experimentally demonstrate three-wave mixing in a semiconductor-superconductor hybrid device, establishing nonzero cubic nonlinearity. An effective model based on Andreev bound states qualitatively captures the observed trends. Our results validate semiconductor-superconductor hybrid devices as a promising platform for tunable nonlinear superconducting circuits, with applications in parametric amplification, quantum control of bosonic modes, and engineering interactions between microwave modes.