State-of-the-art quantum computers are not yet capable of executing large-scale fault-tolerant quantum algorithms. However, experiments in recent years have demonstrated remarkable noisy intermediate-scale and early fault-tolerant quantum computations. To use the existing yet limited hardware most effectively, these protocols are typically tailored to a specific device or hardware platform that comes with certain capabilities but also with individual limitations. This thesis studies quantum protocols suited for near-term atomic quantum processors, i.e., neutral atoms in optical tweezer arrays and trapped ions. One challenge these two platforms have in common is the difficulty of performing mid-circuit measurements. On the other hand, both platforms offer advantages in qubit connectivity and scalability, both of which can be achieved by shuttling atoms or ions. Furthermore, neutral-atom and trapped-ion setups provide native support for multiqubit gates. The protocols explored in this thesis focus on quantum error correction, but also touch on quantum simulation. Concretely, we first investigate quantum autoencoders as a tool for measurement-free quantum error correction in a quantum memory. We propose an experimental implementation of this quantum machine-learning model on a shuttling-based trapped-ion quantum processor to demonstrate that quantum autoencoders can independently identify optimal strategies that combat hardware-specific noise. Secondly, we develop a software toolbox to optimize two- and multiqubit Rydberg gates utilized in neutral-atom quantum processors. We show that multiqubit gates can be useful for achieving good performance and efficient implementations of Floquet and measurement-free fault-tolerant quantum error correction with neutral atoms. Thirdly, we study the feasibility of neutral atoms as a platform for bosonic quantum error correction. We devise blueprints for encoding Gottesman-Kitaev-Preskill qubits in selected motional modes of neutral atoms confined in optical dipole traps and compare the suitability of optical tweezers and optical lattices for this purpose. Finally, we investigate a novel dissipative variational quantum eigen solver that enables the study of ground-state properties of the pure Z-2 lattice gauge theory. We demonstrate that the scheme outperforms established unitary approaches in the presence of circuit-level noise and can be implemented in available neutral-atom quantum processors. Overall, the schemes developed in this work could serve as building blocks for executing elaborate protocols on state-of-the-art atomic quantum processors. Therefore, the results of this thesis contribute to bridging the gap between the theoretical development of protocols for quantum error correction or quantum simulation and their experimental realization.
We present Q u a n t u m T o o l b o x . j l , an open-source Julia package for simulating open quantum systems. Designed with a syntax familiar to users of Q u T i P (Quantum Toolbox in Python), it harnesses Julia's high-performance ecosystem to deliver fast and scalable simulations. The package includes a suite of time-evolution solvers supporting distributed computing and GPU acceleration, enabling efficient simulation of large-scale quantum systems. We also show how Q u a n t u m T o o l b o x . j l can integrate with automatic differentiation tools, making it well-suited for gradient-based optimization tasks such as quantum optimal control. Benchmark comparisons demonstrate substantial performance gains over existing frameworks. With its flexible design and computational efficiency, Q u a n t u m T o o l b o x . j l serves as a powerful tool for both theoretical studies and practical applications in quantum science.
Quantum computers are approaching the early fault-tolerant regime. Verifying the next generation of quantum hardware requires joint emulation of the quantum processor, hardware noise, and classical control and decoding logic. We introduce the Programmable Pauli Virtual Machine (PPVM), an open-source framework for digital twins of quantum processors. PPVM unifies Pauli propagation and generalized tableau simulation under a common abstraction within a single virtual machine. Its bytecode supports arbitrary classical control flow, with measurement-conditioned feed-forward available in the generalized tableau backend. For neutral-atom hardware, we derive independent and correlated atom-loss channels and integrate them into both backends. We demonstrate loss-aware magic state distillation on over a thousand physical qubits and integration with classical decoding through Bloqade QEC Studio.
Abstract We present an industrial end-user perspective on the current state of quantum computing hardware for one specific technological approach, the neutral atom platform. Our aim is to assist developers in understanding the impact of the specific properties of these devices on the effectiveness of algorithm execution. Based on discussions with different vendors and recent literature, we discuss the performance data of the neutral atom platform. Specifically, we focus on the physical qubit architecture, which affects state preparation, qubit-to-qubit connectivity, gate fidelities, native gate instruction set, and individual qubit stability. These factors determine both the quantum-part execution time and the end-to-end wall clock time relevant for end-users, but also the ability to perform fault-tolerant quantum computation in the future. We end with an overview of which applications have been shown to be well suited for the peculiar properties of neutral atom-based quantum computers.
The power of quantum computation derives from algorithmic methods that exploit the availability of quantum superposition and entanglement to perform computations that are intractable with classical devices. The race is on to develop hardware that will unleash the promise of quantum algorithms. A handful of different types of hardware are currently being developed with the greatest efforts directed at superconducting, quantum-dot, trapped-ion, photonic, and neutral-atom approaches [1]. While all approaches have strengths and weaknesses, and are at different stages of development, the challenge of creating a practical design that can be scaled to a million or more qubits has not yet been met with any of the existing platforms. One may wonder if we really need a million qubits for a useful quantum computer. The answer depends on our ambition level. On the one hand it is widely believed that a quantum computer with less than 100 reliable qubits will be able to demonstrate a quantum advantage for a well defined computational problem [2]. Demonstration of a quantum computational advantage will generate great excitement in the halls of academia, but will have little broader import. A problem of great practical interest such as ab initio design of chemicals for increasing the yield of fertilizers for crop production, to name but one example, may also require just a few hundred qubits, provided computational sequences with circuit depth of 1010 or more operations can be reliably performed [3]. However, given the current performance of qubit hardware, which has demonstrated error rates not less than ∼10−3, computations with depth 1010 will only produce random outcomes of negligible value. The solution lies in the construction of error-correction circuitry operating on logical qubits, each composed of many physical qubits, which will enable logical error rates many orders of magnitude smaller than physical error rates. Although error correction is remarkably efficient for classical computing devices—Hamming codes detect and correct errors while only requiring roughly 10% overhead in the number of physical bits—quantum error correction is notoriously expensive. New approaches to error correction are the subject of intensive research with one promising direction being the development of codes that are optimized to suppress the dominant error mechanism in a particular physical platform [4,5]. Nevertheless, with physical error rates of 10−4, a plausible target for current qubit systems, the overhead required to reach logical error rates of 10−10 may be measured in thousands of physical qubits for each logical qubit. Thus a quantum computer able to perform deep calculations on a few hundred logical qubits could require a million physical qubits. A consequence of the cost of quantum error correction is that any viable approach to large-scale quantum computing needs to combine high-fidelity quantum logic operations with a capability for integrating large numbers of physical qubits. From this perspective neutral-atom qubits appear particularly promising [6] as they have already demonstrated control of more qubits than any other platform with recent experiments in 1D [7], 2D [8,9], and 3D [10] geometries showing control of up to 50 atomic qubits. Large qubit arrays can potentially be prepared in 1D, 2D, or 3D geometries. The number of proximal qubits increases with the dimensionality, which is advantageous for implementation of error correction code words, and points towards a preference for 2D or 3D arrays. On the other hand, the added overhead of compensating crosstalk incurred when targeting atoms inside a 3D volume makes parallel operations on multiple qubits challenging. A 2D geometry, as shown schematically in Fig. 1, may be an optimal choice since qubit control and measurement can be performed with lasers propagating normal to the plane of the array so that individual qubit sites can be addressed independently. With demonstrated array periods of a few micrometers we require a footprint of less than 1 mm2 for 104 qubits. Conceptual picture of a 2D neutral-atom qubit array. a) High-numerical-aperture lenses project several different wavelengths of light for control and measurement of the qubits. Specific choices of optical wavelengths depend on the atomic species. Not shown are optics for initial laser cooling, transport to the array, beam scanning, and imaging for qubit measurement. b) Averaged fluorescence image of 49 atomic qubits on a 2D grid with |
3.8μm| spacing [8]. From a fundamental perspective the prospects for scaling neutral-atom systems are particularly promising due to the exceptionally large ratio between coherent and incoherent coupling rates. Neutral-atom qubits are encoded in hyperfine ground states for which coherence times of the order of 10 s have been demonstrated [10]. This implies a dephasing rate |
γ∼0.1s−1|. The coherent coupling that enables quantum logic operations is switched on by exciting atoms to high-lying Rydberg states with principal quantum number close to 100 [11,12]. Rydberg excited atoms at spacings of a few micrometers in an optical lattice interact coherently with rates |
g>109s−1|. The ratio between desired coherent coupling and residual incoherent dephasing of g/γ ∼ 1010 establishes a figure of merit that is enabling for scalability. To our knowledge only trapped ions can claim a similar g/γ ratio [13], but without a correspondingly direct path towards controlling thousands of qubits in a single processing unit. Although the g/γ ratio is exceptionally favorable for neutral-atom qubits a complete set of universal gate operations has not yet been demonstrated with high fidelity. Single-qubit gates in large 2D and 3D arrays have reached fidelity |
F∼0.999| [8,10]. However, the highest demonstrated fidelity for two-qubit entanglement mediated by Rydberg-state interactions is |
F<0.8| [6,14,15], a value that is well short of the theoretical limit of |
F>0.9999| [16,17]. There is healthy optimism within the research community working with neutral-atom qubits that combining improved laser sources with reduced noise, better cooling to reduce motional dephasing, and control of stray electric fields that perturb Rydberg atoms will lead to substantially improved gate fidelity in the near future. Recent results with better filtering of laser phase noise have already demonstrated remarkable improvement in ground–Rydberg entanglement [18]. The outlook for the next few years appears very promising. We anticipate that with advances in lasers, optical lattices for atom trapping, deterministic rearrangement and loading of atoms in multi-dimensional arrays [19,20], and optics for fast beam scanning it will be possible to increase the number of physical qubits in a single neutral-atom module to at least 104. A challenging yet plausible path to a million-qubit processor can then be contemplated by connecting 100 such modules with atom–photon entanglement channels [21]. Beyond the potential for advancing the state of the art in computation, development of techniques for single-atom control inside large multi-atom arrays will enable other applications of quantum science including metrology and time-keeping. Rydberg interactions that are at the heart of a neutral-atom quantum computer may lead to multi-atom entanglement and Heisenberg scaling of atomic-clock precision [22]. This work was supported by the NSF and ARL CDQI.
We introduce RandomMeas.jl , a modular and high-performance open-source software package written in Julia for implementing and analyzing randomized measurement protocols in quantum computing. Randomized measurements provide a powerful framework for extracting properties of quantum states and processes such as expectation values, entanglement, and fidelities using simple experimental procedures combined with classical post-processing, most prominently via the classical shadow formalism. RandomMeas.jl covers the full randomized measurement workflow, from the generation of measurement settings for use on a quantum computer, the optional classical simulation of randomized measurements with tensor networks, to a suite of estimators for physical properties based on classical shadows. The package includes advanced features such as robust and shallow shadow techniques, batch estimators, and built-in statistical uncertainty estimation. Its unified, composable design enables the scalable application and further development of randomized measurements protocols across theoretical and experimental contexts.