Simultaneous operation of an 18-qubit modular array in germanium
J. J. Dijkema, X. Zhang, A. Bardakas, D. Bouman, A. Cuzzocrea, D. van Driel, D. Girardi, L. E. A. Stehouwer, G. Scappucci, A. M. J. Zwerver, N. W. Hendrickx
cond-mat.mes-hallquant-phSubmitted Apr 1, 2026• Announced Apr 2, 2026• 26 citations
Utility-scale quantum computing requires the integration and operation of a large-scale qubit register. Semiconductor spin qubits are a primary candidate for this, due to the prospects of building integrated hybrid quantum-classical architectures. However, scaling spin-qubit systems while preserving performance and control has remained a challenge. Here, we demonstrate the operation of an 18-qubit array in germanium based on an extendable 2xN architecture. We achieve simultaneous initialization, control, and readout across the entire array, enabled by parallel operation of modular unit cells. Across the array, we achieve average and median single-qubit gate fidelities of 99.8% and 99.9%, respectively. Finally, we characterize the nearest-neighbor exchange couplings throughout the device and implement high-quality controlled-Z gates to generate a three-qubit Greenberger-Horne-Zeilinger (GHZ) state. These results demonstrate that spin-qubit arrays can be scaled while maintaining high-fidelity operation and establish a modular, extendable architecture for planar semiconductor quantum processors.
Utility-scale quantum computing requires the integration and operation of a large-scale qubit register. Semiconductor spin qubits are a primary candidate for this, due to the prospects of building integrated hybrid quantum-classical architectures. However, scaling spin-qubit systems while preserving performance and control has remained a challenge. Here, we demonstrate the operation of an 18-qubit array in germanium based on an extendable 2xN architecture. We achieve simultaneous initialization, control, and readout across the entire array, enabled by parallel operation of modular unit cells. Across the array, we achieve average and median single-qubit gate fidelities of 99.8% and 99.9%, respectively. Finally, we characterize the nearest-neighbor exchange couplings throughout the device and implement high-quality controlled-Z gates to generate a three-qubit Greenberger-Horne-Zeilinger (GHZ) state. These results demonstrate that spin-qubit arrays can be scaled while maintaining high-fidelity operation and establish a modular, extendable architecture for planar semiconductor quantum processors.
Abstract Silicon spin qubits offer a promising path to scalable quantum computing due to their compatibility with industrial semiconductor manufacturing. A key requirement for scaling quantum processors is the ability to perform high-fidelity operations in parallel across many qubits. However, simultaneous control remains a major challenge in silicon devices, as fidelities typically degrade under parallel operation. Here we identify microwave-drive-induced a.c.-Stark shifts as the dominant source of this degradation in a five-qubit silicon spin array. We address this by introducing a scalable mitigation protocol based solely on pairwise phase calibrations. Using tailored control pulses on a shared control line, we achieve primitive X and Y gate fidelities well above 99.99% for each qubit individually, with some approaching 99.999%. Furthermore, these fidelities are preserved above 99.99% during simultaneous operation of up to three qubits. During parallel five-qubit operation, fidelities remain above the widely targeted fault-tolerant threshold of 99.9%. By maintaining high-fidelity control during simultaneous operation, shared qubit-control lines can support the development of large-scale semiconductor quantum processors.
Silicon-based spin qubits have emerged as a promising platform for scalable quantum computation due to their compatibility with advanced semiconductor fabrication and integration with classical CMOS electronics. As fabrication capabilities advance toward larger, higher-yield devices, the field is transitioning from academic prototypes toward processors ultimately requiring millions of qubits. This shift places increasing emphasis on developing operating techniques that scale with qubit number. In this thesis, a four qubit SiMOS processor is used to investigate three key aspects of multi-qubit operation for spin-based quantum computing. First, tuning and operation techniques for parallel double-quantum-dot unit cells are developed. Electron loading strategies enable four-qubit operation in an isolated charge configuration, and universal single- and two-qubit control is demonstrated. The native gate set is characterised using gate set tomography. The processor is operated as two unit cells that can be initialised and read out in parallel, providing two independent parity measurements per shot, without increasing operation time or degrading state preparation and measurement fidelity. Second, control techniques for generating multi-qubit entangled states and executing general quantum circuits are established. Three-qubit maximally entangled states, including cluster and Greenberger–Horne–Zeilinger states, are generated and measured with a maximum fidelity of 82.5%. A Mermin value of 3.14 is achieved, certifying genuine tripartite entanglement. A fully symmetric dynamically decoupled gate sequence is developed, extending the entanglement lifetime beyond T2* to a limit set by T2-Hahn. A workflow for compiling, executing, and analysing arbitrary circuits from OpenQASM is also demonstrated. Finally, the first mid-circuit measurements in a silicon spin-qubit system are presented. This capability is extended to feedforward control, including a novel “in-layer” method that performs conditional phase operations without routing information to the classical control layer. This approach leverages measurement-induced backaction as a control mechanism. Both in-layer and FPGA-enabled feedforward strategies are benchmarked, and their dominant error channels are identified.
Abstract Phosphorus atoms in silicon represent a promising platform for quantum computing, as their nuclear spins exhibit coherence times over seconds 1,2 with high-fidelity readout and single-qubit control 3 . By placing several phosphorus atoms within a radius of a few nanometres, they couple by means of the hyperfine interaction to a single, shared electron. Such a nuclear spin register enables high-fidelity multi-qubit control 4 and the execution of small-scale quantum algorithms 5 . An important requirement for scaling up is the ability to extend high-fidelity entanglement non-locally across several spin registers. Here we address this challenge with an 11-qubit atom processor composed of two multi-nuclear spin registers that are linked by means of electron exchange interaction. Through the advancement of calibration and control protocols, we achieve single-qubit and multi-qubit gates with all fidelities ranging from 99.10% to 99.99%. By entangling all combinations of local and non-local nuclear-spin pairs, we map out the performance of the processor and achieve state-of-the-art Bell-state fidelities of up to 99.5%. We then generate Greenberger–Horne–Zeilinger (GHZ) states with an increasing number of qubits and show entanglement of up to eight nuclear spins. By establishing high-fidelity operation across interconnected nuclear spin registers, we realize a key milestone towards fault-tolerant quantum computation with atom processors.
Fault-tolerant quantum computation requires increasing the qubit count while maintaining high performance and connectivity. Semiconductor qubits have demonstrated high-fidelity operation, but growing the system size at sufficient connectivity remains challenging, such that scaling mainly occurred in one spatial direction to preserve access for control lines in the other. Here, we realise an approach that relaxes the requirements on fabrication and demonstrate a 6$\times6quantumdotarray,definedbyasharedbarriergateandindividualplungergates.Thequantumdotsaretunedthroughcoherentspinshuttlingoverdistancesupto5.2umintoasparseconfigurationof10simultaneouslyoperatedqubits,leavingspaceforshuttlingconnections.Wereducecrosstalkby42\times$ in this separated regime, enabling high-fidelity simultaneous single-qubit control, while control-Z operations can be implemented through shuttling and plunger-only control. These results promise high-connectivity quantum circuits, enabled by scaling to two-dimensional geometries and exploiting shuttling.
The promise of quantum computation is contingent upon physical qubits with both a low gate error rate and broad scalability. Silicon-based spins are a leading qubit platform but demonstrations to date have not utilized fabrication processes capable of extending arrays in two dimensions while maintaining complete control of individual spins. Here, we implement an interconnect process, common in semiconductor manufacturing, with multiple back-end-of-line layers, to show an extendable two-dimensional array of spins with fully controllable nearest-neighbor exchange interactions. In a device using three interconnect layers, we encode exchange-only qubits and achieve average single-qubit gate fidelities consistent with single-layer devices, including fidelities greater than 99.9%, as measured by blind randomized benchmarking. Moreover, with spin connectivity in two dimensions, we show that both linear and right-angle exchange-only qubits with high performance can be formed, enabling qubit array reconfigurability in the presence of defects. This extendable device platform demonstrates that industrial manufacturing techniques can be leveraged for scalable spin qubit technologies.
The simplicity of encoding a qubit in the state of a single electron spin and the potential for their integration into industry-standard microchips continue to drive the field of semiconductor-based quantum computing. After a series of key first-principles demonstrations validating universal gate operations, initialization and readout, three-qubit algorithms have already been realized with silicon-based quantum dots in past years. Devices containing more qubits have become available since then but experiments have not gone beyond meeting the DiVincenzo criteria. In this work, we fully exploit the capacity of a spin-qubit array and implement a six-qubit quantum circuit, the largest utilizing semiconductor quantum technology. By programming the quantum processor, we execute quantum circuits across all permutations of three, four, five, and six neighboring qubits, demonstrating successful programmable multi-qubit operation throughout the array. Using an error model that incorporates quasi-static noise allows us to qualitatively explain some key trends in our experimental results and highlight the necessity to minimize idling times through simultaneous operations, extending dephasing times, and consistently improving state preparation and measurement fidelities.