Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.07683

Sparse qubit operation in a 6$\times$6 quantum dot array

Alexader S. Ivlev, Harold L. Co, Damien R. Crielaard, Alice Petrillo, Setareh Kazemzadeh, Giordano Scappucci, Menno Veldhorst

cond-mat.mes-hallquant-phSubmitted Oct 6, 2026• Announced Oct 7, 2026• 0 citations
arXivHTMLPDF

Abstract

Fault-tolerant quantum computation requires increasing the qubit count while maintaining high performance and connectivity. Semiconductor qubits have demonstrated high-fidelity operation, but growing the system size at sufficient connectivity remains challenging, such that scaling mainly occurred in one spatial direction to preserve access for control lines in the other. Here, we realise an approach that relaxes the requirements on fabrication and demonstrate a 6$\times$6 quantum dot array, defined by a shared barrier gate and individual plunger gates. The quantum dots are tuned through coherent spin shuttling over distances up to 5.2um into a sparse configuration of 10 simultaneously operated qubits, leaving space for shuttling connections. We reduce crosstalk by 42$\times$ in this separated regime, enabling high-fidelity simultaneous single-qubit control, while control-Z operations can be implemented through shuttling and plunger-only control. These results promise high-connectivity quantum circuits, enabled by scaling to two-dimensional geometries and exploiting shuttling.

AI Summary

The paper investigates whether semiconductor spin qubits can be operated in a two-dimensional array with simplified barrier wiring, using sparse occupation and shuttling to separate single-qubit control from two-qubit interactions. A Ge/SiGe hole-spin device combines a shared barrier grid with individually controlled plunger gates in a $6\times6$ layout; all barrier voltages remain fixed during operation. Tune-up beyond the charge sensors’ range uses “spin evolution diagrams”: a superposition is shuttled through the array, and site-dependent Larmor phase accumulation identifies charge-transfer regions. Coherent access is demonstrated to 30 of 36 sites, with charge-dot formation confidently established at 34. Shuttling paths extend to a total traversed distance of $5.2\,\mu\mathrm{m}$. Repeated round trips over $2.8\,\mu\mathrm{m}$ yield basis-state and superposition-state fidelities of $99.4\pm0.1\%$ and $95.7\pm0.5\%$, respectively; these are not full process-fidelity measurements. Ten spins occupy a sparse configuration. Resonant driving crosstalk is reduced by approximately $42\times$ relative to nearest-neighbour driving. Randomised benchmarking reports single-qubit Clifford fidelities above $99\%$ across the ten qubits, including simultaneous operation in groups of five. Shuttling brings selected pairs together for plunger-controlled exchange. Character randomised benchmarking gives a best CZ fidelity of $88.6\pm1.6\%$ at a duration of $534\,\mathrm{ns}$; three other pairs achieve approximately $67$–$72\%$. Stated limitations include inaccessible coherent sites, recovery-pulse sensitivity, dephasing during shuttling, restricted pulse-voltage ranges, and incompletely understood multi-dot potentials. Two-qubit fidelities remain below fault-tolerant requirements, and additional connections are limited by coherence loss.

No sign of AI-generated textOverclaims

Error found: The abstract claims ten simultaneously operated qubits, whereas simultaneous coherent driving and randomized benchmarking are demonstrated only in groups of five, with the other five spins serving readout.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
Main: 11 pages, 5 figures. Supplementary Information: 17 pages

Related papers

Simultaneous single-qubit driving of semiconductor spin qubits at the fault-tolerant threshold

William I. L. Lawrie, Maximilian Rimbach-Russ, F. van Riggelen +6 more

Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.

arXiv:2109.07837•Nature Communications•Jun 19, 2023•104 citations

Simultaneous high-fidelity single-qubit gates in a spin qubit array

Yi-Hsien Wu, Leon C. Camenzind, Patrick Bütler +8 more

Abstract Silicon spin qubits offer a promising path to scalable quantum computing due to their compatibility with industrial semiconductor manufacturing. A key requirement for scaling quantum processors is the ability to perform high-fidelity operations in parallel across many qubits. However, simultaneous control remains a major challenge in silicon devices, as fidelities typically degrade under parallel operation. Here we identify microwave-drive-induced a.c.-Stark shifts as the dominant source of this degradation in a five-qubit silicon spin array. We address this by introducing a scalable mitigation protocol based solely on pairwise phase calibrations. Using tailored control pulses on a shared control line, we achieve primitive X and Y gate fidelities well above 99.99% for each qubit individually, with some approaching 99.999%. Furthermore, these fidelities are preserved above 99.99% during simultaneous operation of up to three qubits. During parallel five-qubit operation, fidelities remain above the widely targeted fault-tolerant threshold of 99.9%. By maintaining high-fidelity control during simultaneous operation, shared qubit-control lines can support the development of large-scale semiconductor quantum processors.

arXiv:2507.11918•Nature Physics•Oct 15, 2026•49 citations

A Three-Dimensional Array of Quantum Dots

Hanifa Tidjani, Dario Denora, Michael Chan +6 more

Quantum dots can confine single electrons or holes to define spin qubits that can be operated with high fidelity. Experimental work has progressed from linear to two-dimensional arrays of quantum dots, enabling qubit interactions that are essential for quantum simulation and computation. Here, we explore architectures beyond planar geometries by constructing quantum dot arrays in three dimensions. We realize an eight-quantum dot system in a silicon-germanium heterostructure comprising two stacked germanium quantum wells, where quantum dots are positioned at the vertices of a cuboid. Using electrostatic gate control, we load a single hole into any of the eight quantum dots. To demonstrate the potential of multilayer quantum dot systems, we show coherent spin control and hopping-induced spin rotations by shuttling between the quantum wells. The ability to extend quantum dot arrays in three dimensions provides opportunities for novel quantum hardware and high-connectivity quantum circuits.

cond-mat.mes-hallCross-listedarXiv:2512.01634•Dec 2, 2025

Generating Shuttling Procedures for Constrained Silicon Quantum Dot Array

Naoto Sato, Tomonori Sekiguchi, Takeru Utsugi +1 more

In silicon quantum computers, a single electron is trapped in a microstructure called a quantum dot, and its spin is used as a qubit. For large-scale integration of qubits, we previously proposed an approach of sharing a control gate in the row or column of a 2-D quantum dot array. In our array, the shuttling of electrons is a useful technique to operate the target qubit independently and avoid crosstalk. However, since the shuttling is also conducted using shared control gates, the movement of qubits is complexly constrained. We, therefore, propose a formal model based on state transition systems to describe those constraints and operation procedures on the array. We also present an approach to generate operation procedures under the constraints. Utilizing this approach, we present a concrete method for our 16 × 8 quantum dot array. By implementing the proposed method as a quantum compiler, we confirmed that it is possible to generate operation procedures in a practical amount of time for arbitrary quantum circuits. We also demonstrated that crosstalk can be avoided by shuttling and that the fidelity in that case is higher than when crosstalk is not avoided.

arXiv:2401.14683•IEEE Transactions on Quantum Engineering•Jan 1, 2025•6 citations

A crossbar network for silicon quantum dot qubits

Ruoyu Li, Luca Petit, David P. Franke +10 more

The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. To increase the number of qubits to the thousands or millions of qubits needed for practical quantum information, we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for nonplanar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates enable qubit addressability and readout. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning-noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future.

arXiv:1711.03807•Science Advances•Jul 6, 2018•322 citations

Spiderweb Array: A Sparse Spin-Qubit Array

Jelmer M. Boter, Juan Pablo Dehollain, Jeroen P. G. van Dijk +8 more

One of the main bottlenecks in the pursuit of a large-scale--chip-based quantum computer is the large number of control signals needed to operate qubit systems. As system sizes scale up, the number of terminals required to connect to off-chip control electronics quickly becomes unmanageable. Here, we discuss a quantum-dot spin-qubit architecture that integrates on-chip control electronics, allowing for a significant reduction in the number of signal connections at the chip boundary. By arranging the qubits in a two-dimensional array with about $12\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$ pitch, we create space to implement locally integrated sample-and-hold circuits. This allows us to offset the inhomogeneities in the potential landscape across the array and to globally share the majority of the control signals for qubit operations. We make use of advanced circuit modeling software to go beyond conceptual drawings of the component layout, to assess the feasibility of the scheme through a concrete floor plan, including estimates of footprints for quantum and classical electronics, as well as routing of signal lines across the chip using different interconnect layers. We make use of local demultiplexing circuits to achieve an efficient signal-connection scaling, leading to a Rent's exponent as low as $p=0.43$. Furthermore, we use available data from state-of-the-art spin qubit and microelectronics technology development, as well as circuit models and simulations, to estimate the operation frequencies and power consumption of a million-qubit array. This work presents a complementary approach to previously proposed architectures, focusing on a feasible scheme to integrating quantum and classical hardware, and identifying remaining challenges for achieving full fault-tolerant quantum computation. It thereby significantly closes the gap towards a fully CMOS-compatible quantum computer implementation.

arXiv:2110.00189•Physical Review Applied•Aug 19, 2022•112 citations
Fault-tolerant quantum computation requires increasing the qubit count while maintaining high performance and connectivity. Semiconductor qubits have demonstrated high-fidelity operation, but growing the system size at sufficient connectivity remains challenging, such that scaling mainly occurred in one spatial direction to preserve access for control lines in the other. Here, we realise an approach that relaxes the requirements on fabrication and demonstrate a 6×\times×6 quantum dot array, defined by a shared barrier gate and individual plunger gates. The quantum dots are tuned through coherent spin shuttling over distances up to 5.2um into a sparse configuration of 10 simultaneously operated qubits, leaving space for shuttling connections. We reduce crosstalk by 42×\times× in this separated regime, enabling high-fidelity simultaneous single-qubit control, while control-Z operations can be implemented through shuttling and plunger-only control. These results promise high-connectivity quantum circuits, enabled by scaling to two-dimensional geometries and exploiting shuttling.
The paper investigates whether semiconductor spin qubits can be operated in a two-dimensional array with simplified barrier wiring, using sparse occupation and shuttling to separate single-qubit control from two-qubit interactions. A Ge/SiGe hole-spin device combines a shared barrier grid with individually controlled plunger gates in a 6×66\times66×6 layout; all barrier voltages remain fixed during operation.
Tune-up beyond the charge sensors’ range uses “spin evolution diagrams”: a superposition is shuttled through the array, and site-dependent Larmor phase accumulation identifies charge-transfer regions. Coherent access is demonstrated to 30 of 36 sites, with charge-dot formation confidently established at 34. Shuttling paths extend to a total traversed distance of 5.2 μm5.2\,\mu\mathrm{m}5.2μm. Repeated round trips over 2.8 μm2.8\,\mu\mathrm{m}2.8μm yield basis-state and superposition-state fidelities of 99.4±0.1%99.4\pm0.1\%99.4±0.1% and 95.7±0.5%95.7\pm0.5\%95.7±0.5%, respectively; these are not full process-fidelity measurements.
Ten spins occupy a sparse configuration. Resonant driving crosstalk is reduced by approximately 42×42\times42× relative to nearest-neighbour driving. Randomised benchmarking reports single-qubit Clifford fidelities above 99%99\%99% across the ten qubits, including simultaneous operation in groups of five. Shuttling brings selected pairs together for plunger-controlled exchange. Character randomised benchmarking gives a best CZ fidelity of 88.6±1.6%88.6\pm1.6\%88.6±1.6% at a duration of 534 ns534\,\mathrm{ns}534ns; three other pairs achieve approximately 676767–72%72\%72%.
Stated limitations include inaccessible coherent sites, recovery-pulse sensitivity, dephasing during shuttling, restricted pulse-voltage ranges, and incompletely understood multi-dot potentials. Two-qubit fidelities remain below fault-tolerant requirements, and additional connections are limited by coherence loss.
Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.
Abstract Silicon spin qubits offer a promising path to scalable quantum computing due to their compatibility with industrial semiconductor manufacturing. A key requirement for scaling quantum processors is the ability to perform high-fidelity operations in parallel across many qubits. However, simultaneous control remains a major challenge in silicon devices, as fidelities typically degrade under parallel operation. Here we identify microwave-drive-induced a.c.-Stark shifts as the dominant source of this degradation in a five-qubit silicon spin array. We address this by introducing a scalable mitigation protocol based solely on pairwise phase calibrations. Using tailored control pulses on a shared control line, we achieve primitive X and Y gate fidelities well above 99.99% for each qubit individually, with some approaching 99.999%. Furthermore, these fidelities are preserved above 99.99% during simultaneous operation of up to three qubits. During parallel five-qubit operation, fidelities remain above the widely targeted fault-tolerant threshold of 99.9%. By maintaining high-fidelity control during simultaneous operation, shared qubit-control lines can support the development of large-scale semiconductor quantum processors.
Quantum dots can confine single electrons or holes to define spin qubits that can be operated with high fidelity. Experimental work has progressed from linear to two-dimensional arrays of quantum dots, enabling qubit interactions that are essential for quantum simulation and computation. Here, we explore architectures beyond planar geometries by constructing quantum dot arrays in three dimensions. We realize an eight-quantum dot system in a silicon-germanium heterostructure comprising two stacked germanium quantum wells, where quantum dots are positioned at the vertices of a cuboid. Using electrostatic gate control, we load a single hole into any of the eight quantum dots. To demonstrate the potential of multilayer quantum dot systems, we show coherent spin control and hopping-induced spin rotations by shuttling between the quantum wells. The ability to extend quantum dot arrays in three dimensions provides opportunities for novel quantum hardware and high-connectivity quantum circuits.
In silicon quantum computers, a single electron is trapped in a microstructure called a quantum dot, and its spin is used as a qubit. For large-scale integration of qubits, we previously proposed an approach of sharing a control gate in the row or column of a 2-D quantum dot array. In our array, the shuttling of electrons is a useful technique to operate the target qubit independently and avoid crosstalk. However, since the shuttling is also conducted using shared control gates, the movement of qubits is complexly constrained. We, therefore, propose a formal model based on state transition systems to describe those constraints and operation procedures on the array. We also present an approach to generate operation procedures under the constraints. Utilizing this approach, we present a concrete method for our 16 × 8 quantum dot array. By implementing the proposed method as a quantum compiler, we confirmed that it is possible to generate operation procedures in a practical amount of time for arbitrary quantum circuits. We also demonstrated that crosstalk can be avoided by shuttling and that the fidelity in that case is higher than when crosstalk is not avoided.
The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. To increase the number of qubits to the thousands or millions of qubits needed for practical quantum information, we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for nonplanar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates enable qubit addressability and readout. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning-noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future.
One of the main bottlenecks in the pursuit of a large-scale--chip-based quantum computer is the large number of control signals needed to operate qubit systems. As system sizes scale up, the number of terminals required to connect to off-chip control electronics quickly becomes unmanageable. Here, we discuss a quantum-dot spin-qubit architecture that integrates on-chip control electronics, allowing for a significant reduction in the number of signal connections at the chip boundary. By arranging the qubits in a two-dimensional array with about $12\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$ pitch, we create space to implement locally integrated sample-and-hold circuits. This allows us to offset the inhomogeneities in the potential landscape across the array and to globally share the majority of the control signals for qubit operations. We make use of advanced circuit modeling software to go beyond conceptual drawings of the component layout, to assess the feasibility of the scheme through a concrete floor plan, including estimates of footprints for quantum and classical electronics, as well as routing of signal lines across the chip using different interconnect layers. We make use of local demultiplexing circuits to achieve an efficient signal-connection scaling, leading to a Rent's exponent as low as p=0.43p=0.43p=0.43. Furthermore, we use available data from state-of-the-art spin qubit and microelectronics technology development, as well as circuit models and simulations, to estimate the operation frequencies and power consumption of a million-qubit array. This work presents a complementary approach to previously proposed architectures, focusing on a feasible scheme to integrating quantum and classical hardware, and identifying remaining challenges for achieving full fault-tolerant quantum computation. It thereby significantly closes the gap towards a fully CMOS-compatible quantum computer implementation.