Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.15498

A systematic design approach for one-dimensional and crossed photonic nanobeam cavities for quantum dot integration

Oscar Camacho Ibarra, Jan-Gabriel Hartel, Atzin David Ruiz Perez, Sonja Barkhofen, Klaus D. Jöns

physics.opticsquant-phSubmitted Mar 16, 2026• Announced Mar 17, 2026
arXivHTMLPDF

Abstract

We present a systematic workflow for the design of one-dimensional photonic crystal nanobeam cavities with non-zero cavity lengths. By simultaneously optimizing the lattice periodicity, air-hole geometry, and cavity length, our approach enables precise control of optical confinement while mitigating radiative losses and linewidth broadening effects. The method is further extended to the design of crossed nanobeam cavities with both matching and mismatched resonance frequencies. This strategy significantly reduces the need for extensive parameter sweeps, providing an efficient route toward optimized cavity designs for integrated quantum photonic applications. Moreover, the resulting structures are inherently compatible with the integration of single-photon emitters.

Comments
12 pages, 8 figures

Related papers

Single-Photon Nonlinearity from a Nanobeam with a Quantum Dot

Abhijit Biswas, Neelesh Kumar Vij, Allan S. Bracker +3 more

An efficient single-photon nonlinearity is a key resource for photonic quantum technologies. Single-photon nonlinearities have been demonstrated with quantum dots (QDs) across a range of cavity and waveguide geometries. However, none of these realizations simultaneously provide high-efficiency direct fiber coupling and compatibility with scalable on-chip integration. The nanobeam cavity addresses these limitations through its in-plane geometry, which enables highly efficient, direct fiber coupling alongside scalable homogeneous and heterogeneous on-chip integration. Here, we report a single-photon nonlinearity from a nanobeam cavity coupled to a single quantum dot. The nanobeam interfaces directly with a single-mode fiber with an efficiency of 60%. Driven by resonant picosecond pulses, the platform achieves a single-photon nonlinearity with a low threshold of 0.24 incident photons per pulse. The system operates in the strong-coupling regime, exhibiting a coupling rate of g/2π = 29.1 GHz and a cooperativity of C = 3.98. These results establish the nanobeam cavity-QD system as a compact, chip-integrable, and fiber-compatible building block for scalable photonic quantum technologies.

physics.opticsCross-listedarXiv:2609.36658•Sep 30, 2026•1 citation

Photonic crystal nanobeam cavities with optical resonances around 800 nm

Ivens Saber, Rajiv Boddeda, Fabrice Raineri +7 more

We report on the design and the fabrication of 1D photonic crystal nanobeam cavities with optical resonances around 800 nm, compatible with rubidium, cesium, or argon atomic transitions. The cavities are made of indium gallium phosphide material, a III-V semi-conductor compound which has a large index of refraction (n≃3.3) favoring strong optical confinement and small mode volumes. Nanobeam cavities with inline and side coupling have been designed and fabricated, and quality factors up to 2×104 have been measured.

arXiv:1903.04802•Journal of the Optical Society of America B•Jun 12, 2019•4 citations

Inverse-Designed Nanobeam Cavities for High-Cooperativity Spin-Photon Interfaces in Silicon

Nail Letty, Md Sakibul Islam, Wayesh Qarony

Telecom-band spin defects in silicon offer a compelling platform for integrated quantum networks by combining scalable silicon photonics with spin-based quantum memories and multiqubit registers. The T center and recently demonstrated Al1 center are particularly promising, but their limited coherent zero-phonon emission requires strong cavity enhancement for efficient spin-photon interfaces. Here, we inverse-design silicon nanobeam cavities for both centers using a unified adjoint-optimization framework targeting Purcell enhancement, resonance alignment, and photon extraction. For each emitter, symmetric cavities maximize Purcell enhancement, while asymmetric cavities provide directional coupling to an integrated waveguide. Three-dimensional finite-difference time-domain simulations yield loaded quality factors up to 3.25 x 10^6, Purcell factors up to 1.43 x 10^5, and cooperativities of approximately 280-5000, corresponding to cavity-coupled emission fractions exceeding 99.6%. The asymmetric cavities direct approximately 90% of emitted power into a single on-chip waveguide while maintaining cooperativity above 280. Under nanometer-scale fabrication perturbations, all four designs remain within the high-cooperativity regime, and high cooperativity persists when the cavity quality factor is constrained to a realistic absorption-limited value of 10^5. This unified, fabrication-compatible framework establishes a scalable cavity-design route for silicon telecom spin-photon interfaces and, to our knowledge, the first cavity designs for the Al1 center.

quant-pharXiv:2609.32205•Sep 29, 2026

Self-Aligned Heterogeneous Quantum Photonic Integration

Kinfung Ngan, Yeeun Choi, Chun-Chieh Chang +2 more

Integrated quantum photonics holds significant promise for scalable photonic quantum information processing, quantum repeaters, and quantum networks, but its development is hindered by the mismatch between materials hosting high-quality quantum emitters and those compatible with mature photonic technologies. Heterogeneous integration offers a potential solution to this challenge, yet practical implementations have been limited by inevitable insertion losses at material interfaces. Here, we present a self-aligned heterogeneous quantum photonic integration approach that can deterministically achieve near-unity coupling efficiency at the interface. To showcase our approach, we demonstrate Purcell enhancement of a silicon vacancy (SiV) center in diamond induced by a heterogeneous photonic crystal cavity defined by titanium dioxide (TiO2), as well as optical spin control and readout via a TiO2 photonic circuit. We further show that, when combined with inverse photonic design, our approach enables efficient and broadband collection of single photons from a color center into a heterogeneous waveguide. Our approach is not restricted to SiV centers or TiO2; it can be broadly applied to integrate diverse solid-state quantum emitters with thin-film photonic devices where conformal deposition is possible. Together, these results establish a practical route to scalable quantum photonic integrated circuits that combine high-quality quantum emitters with technologically mature photonic platforms.

physics.opticsCross-listedarXiv:2601.14552•Jan 22, 2026

Triangular nanobeam photonic cavities in single-crystal diamond

Igal Bayn, B. Meyler, J. Salzman +1 more

Diamond photonics provides an attractive architecture to explore room temperature cavity quantum electrodynamics and to realize scalable multi-qubit computing. Here, we review the present state of diamond photonic technology. The design, fabrication and characterization of a novel nanobeam cavity produced in a single crystal diamond are demonstrated. The present cavity design, based on a triangular cross-section, allows vertical confinement and better signal collection efficiency than that of slab-based nanocavities and eliminates the need for a pre-existing membrane. The nanobeam is fabricated by focused-ion-beam (FIB) patterning. The cavity is characterized by confocal photoluminescence. The modes display quality factors of Q ∼220 and deviate in wavelength by only ∼1.7 nm from the nitrogen-vacancy (NV − ) color center zero phonon line (ZPL). The measured results are found to be in good agreement with three-dimensional finite-difference-time-domain (FDTD) calculations. A more advanced cavity design with Q =22 000 is modeled, showing the potential for high- Q implementations using the triangular geometry. The prospects of this concept and its application in spin non-demolition measurement and quantum computing are discussed.

arXiv:1101.1367•New Journal of Physics•Feb 21, 2011•75 citations

Geometry-driven tunable single-photon coupling into an optical nanofiber cavity

Subrat Sahu, Rajan Jha

We propose a geometry-driven strategy for achieving tunable single-photon coupling in an optical nanofiber cavity (ONFC), where the resonance wavelength is controlled by tailoring the optical nanofiber (ONF) diameter and the grating pitch. By adjusting these structural parameters, the cavity response can be systematically tuned without modifying the material platform or by using any external control schemes. There is a wide spectral resonance wavelength variation of 60, 106, and 70 nm that can be achieved by varying the ONF diameter in the range of 150 nm, the grating pitch of 60 nm, and the elongation of 400 µm, respectively. The integration of a quantum emitter (QE) within the cavity region retains the geometry-dependent tunability of the system. This enables controlled spectral alignment between the QE emission wavelength and the cavity resonance. For a typical QE placed on the ONFC operating around 640 nm, it facilitates a strong spontaneous emission enhancement with a Purcell factor of ∼20 and a coupling efficiency of ∼94% into the ONF-guided mode. The scattering-limited cavity performance yields a quality factor, finesse, and one-pass power loss of 2930, 104, and 2.9%. Owing to its geometry-controlled design, the proposed device can be readily adapted to different QE wavelengths through appropriate structural optimization, offering a compact and fiber-integrated platform for quantum information and communication applications.

Journal of the Optical Society of America B•May 20, 2026•2 citations
We present a systematic workflow for the design of one-dimensional photonic crystal nanobeam cavities with non-zero cavity lengths. By simultaneously optimizing the lattice periodicity, air-hole geometry, and cavity length, our approach enables precise control of optical confinement while mitigating radiative losses and linewidth broadening effects. The method is further extended to the design of crossed nanobeam cavities with both matching and mismatched resonance frequencies. This strategy significantly reduces the need for extensive parameter sweeps, providing an efficient route toward optimized cavity designs for integrated quantum photonic applications. Moreover, the resulting structures are inherently compatible with the integration of single-photon emitters.
An efficient single-photon nonlinearity is a key resource for photonic quantum technologies. Single-photon nonlinearities have been demonstrated with quantum dots (QDs) across a range of cavity and waveguide geometries. However, none of these realizations simultaneously provide high-efficiency direct fiber coupling and compatibility with scalable on-chip integration. The nanobeam cavity addresses these limitations through its in-plane geometry, which enables highly efficient, direct fiber coupling alongside scalable homogeneous and heterogeneous on-chip integration. Here, we report a single-photon nonlinearity from a nanobeam cavity coupled to a single quantum dot. The nanobeam interfaces directly with a single-mode fiber with an efficiency of 60%. Driven by resonant picosecond pulses, the platform achieves a single-photon nonlinearity with a low threshold of 0.24 incident photons per pulse. The system operates in the strong-coupling regime, exhibiting a coupling rate of g/2π = 29.1 GHz and a cooperativity of C = 3.98. These results establish the nanobeam cavity-QD system as a compact, chip-integrable, and fiber-compatible building block for scalable photonic quantum technologies.
We report on the design and the fabrication of 1D photonic crystal nanobeam cavities with optical resonances around 800 nm, compatible with rubidium, cesium, or argon atomic transitions. The cavities are made of indium gallium phosphide material, a III-V semi-conductor compound which has a large index of refraction (n≃3.3) favoring strong optical confinement and small mode volumes. Nanobeam cavities with inline and side coupling have been designed and fabricated, and quality factors up to 2×104 have been measured.
Telecom-band spin defects in silicon offer a compelling platform for integrated quantum networks by combining scalable silicon photonics with spin-based quantum memories and multiqubit registers. The T center and recently demonstrated Al1 center are particularly promising, but their limited coherent zero-phonon emission requires strong cavity enhancement for efficient spin-photon interfaces. Here, we inverse-design silicon nanobeam cavities for both centers using a unified adjoint-optimization framework targeting Purcell enhancement, resonance alignment, and photon extraction. For each emitter, symmetric cavities maximize Purcell enhancement, while asymmetric cavities provide directional coupling to an integrated waveguide. Three-dimensional finite-difference time-domain simulations yield loaded quality factors up to 3.25 x 10^6, Purcell factors up to 1.43 x 10^5, and cooperativities of approximately 280-5000, corresponding to cavity-coupled emission fractions exceeding 99.6%. The asymmetric cavities direct approximately 90% of emitted power into a single on-chip waveguide while maintaining cooperativity above 280. Under nanometer-scale fabrication perturbations, all four designs remain within the high-cooperativity regime, and high cooperativity persists when the cavity quality factor is constrained to a realistic absorption-limited value of 10^5. This unified, fabrication-compatible framework establishes a scalable cavity-design route for silicon telecom spin-photon interfaces and, to our knowledge, the first cavity designs for the Al1 center.
Integrated quantum photonics holds significant promise for scalable photonic quantum information processing, quantum repeaters, and quantum networks, but its development is hindered by the mismatch between materials hosting high-quality quantum emitters and those compatible with mature photonic technologies. Heterogeneous integration offers a potential solution to this challenge, yet practical implementations have been limited by inevitable insertion losses at material interfaces. Here, we present a self-aligned heterogeneous quantum photonic integration approach that can deterministically achieve near-unity coupling efficiency at the interface. To showcase our approach, we demonstrate Purcell enhancement of a silicon vacancy (SiV) center in diamond induced by a heterogeneous photonic crystal cavity defined by titanium dioxide (TiO2), as well as optical spin control and readout via a TiO2 photonic circuit. We further show that, when combined with inverse photonic design, our approach enables efficient and broadband collection of single photons from a color center into a heterogeneous waveguide. Our approach is not restricted to SiV centers or TiO2; it can be broadly applied to integrate diverse solid-state quantum emitters with thin-film photonic devices where conformal deposition is possible. Together, these results establish a practical route to scalable quantum photonic integrated circuits that combine high-quality quantum emitters with technologically mature photonic platforms.
Diamond photonics provides an attractive architecture to explore room temperature cavity quantum electrodynamics and to realize scalable multi-qubit computing. Here, we review the present state of diamond photonic technology. The design, fabrication and characterization of a novel nanobeam cavity produced in a single crystal diamond are demonstrated. The present cavity design, based on a triangular cross-section, allows vertical confinement and better signal collection efficiency than that of slab-based nanocavities and eliminates the need for a pre-existing membrane. The nanobeam is fabricated by focused-ion-beam (FIB) patterning. The cavity is characterized by confocal photoluminescence. The modes display quality factors of Q ∼220 and deviate in wavelength by only ∼1.7 nm from the nitrogen-vacancy (NV − ) color center zero phonon line (ZPL). The measured results are found to be in good agreement with three-dimensional finite-difference-time-domain (FDTD) calculations. A more advanced cavity design with Q =22 000 is modeled, showing the potential for high- Q implementations using the triangular geometry. The prospects of this concept and its application in spin non-demolition measurement and quantum computing are discussed.
We propose a geometry-driven strategy for achieving tunable single-photon coupling in an optical nanofiber cavity (ONFC), where the resonance wavelength is controlled by tailoring the optical nanofiber (ONF) diameter and the grating pitch. By adjusting these structural parameters, the cavity response can be systematically tuned without modifying the material platform or by using any external control schemes. There is a wide spectral resonance wavelength variation of 60, 106, and 70 nm that can be achieved by varying the ONF diameter in the range of 150 nm, the grating pitch of 60 nm, and the elongation of 400 µm, respectively. The integration of a quantum emitter (QE) within the cavity region retains the geometry-dependent tunability of the system. This enables controlled spectral alignment between the QE emission wavelength and the cavity resonance. For a typical QE placed on the ONFC operating around 640 nm, it facilitates a strong spontaneous emission enhancement with a Purcell factor of ∼20 and a coupling efficiency of ∼94% into the ONF-guided mode. The scattering-limited cavity performance yields a quality factor, finesse, and one-pass power loss of 2930, 104, and 2.9%. Owing to its geometry-controlled design, the proposed device can be readily adapted to different QE wavelengths through appropriate structural optimization, offering a compact and fiber-integrated platform for quantum information and communication applications.