Telecom-band spin defects in silicon offer a compelling platform for integrated quantum networks by combining scalable silicon photonics with spin-based quantum memories and multiqubit registers. The T center and recently demonstrated Al1 center are particularly promising, but their limited coherent zero-phonon emission requires strong cavity enhancement for efficient spin-photon interfaces. Here, we inverse-design silicon nanobeam cavities for both centers using a unified adjoint-optimization framework targeting Purcell enhancement, resonance alignment, and photon extraction. For each emitter, symmetric cavities maximize Purcell enhancement, while asymmetric cavities provide directional coupling to an integrated waveguide. Three-dimensional finite-difference time-domain simulations yield loaded quality factors up to 3.25 x 10^6, Purcell factors up to 1.43 x 10^5, and cooperativities of approximately 280-5000, corresponding to cavity-coupled emission fractions exceeding 99.6%. The asymmetric cavities direct approximately 90% of emitted power into a single on-chip waveguide while maintaining cooperativity above 280. Under nanometer-scale fabrication perturbations, all four designs remain within the high-cooperativity regime, and high cooperativity persists when the cavity quality factor is constrained to a realistic absorption-limited value of 10^5. This unified, fabrication-compatible framework establishes a scalable cavity-design route for silicon telecom spin-photon interfaces and, to our knowledge, the first cavity designs for the Al1 center.
AI Summary
The paper addresses how to enhance coherent telecom-band emission from silicon T-center and Al1-center spin defects while coupling the resulting photons into integrated waveguides. Both defects have limited coherent zero-phonon emission, motivating cavity-enhanced spin–photon interfaces.
A unified adjoint inverse-design framework optimizes silicon nanobeam cavities for Purcell enhancement, resonance alignment, and photon extraction. Four designs are considered: a symmetric cavity targeting maximum Purcell enhancement and an asymmetric cavity targeting directional waveguide coupling for each emitter. Three-dimensional finite-difference time-domain simulations give loaded quality factors up to $3.25\times10^6$, Purcell factors up to $1.43\times10^5$, and cooperativities of approximately $280$–$5000$. These cooperativities correspond to reported cavity-coupled emission fractions above $99.6\%$. The asymmetric designs direct approximately $90\%$ of emitted power into a single on-chip waveguide while retaining cooperativity above $280$.
Robustness is assessed through nanometer-scale fabrication perturbations, under which all four designs remain in the high-cooperativity regime. High cooperativity also persists when the cavity quality factor is constrained to an absorption-limited value of $10^5$. The results are simulation-based; no fabricated-device measurements or experimental spin–photon-interface demonstration are reported in the abstract. The abstract identifies fabrication perturbations and absorption-limited quality factors as practical constraints, but does not provide the detailed perturbation ranges or the emitter parameters used to estimate cooperativity.
No sign of AI-generated textIncrementalMissing comparison
Written by gpt-6.1-sol from the abstract only. Automated: it can be wrong.
Telecom-band spin defects in silicon offer a compelling platform for integrated quantum networks by combining scalable silicon photonics with spin-based quantum memories and multiqubit registers. The T center and recently demonstrated Al1 center are particularly promising, but their limited coherent zero-phonon emission requires strong cavity enhancement for efficient spin-photon interfaces. Here, we inverse-design silicon nanobeam cavities for both centers using a unified adjoint-optimization framework targeting Purcell enhancement, resonance alignment, and photon extraction. For each emitter, symmetric cavities maximize Purcell enhancement, while asymmetric cavities provide directional coupling to an integrated waveguide. Three-dimensional finite-difference time-domain simulations yield loaded quality factors up to 3.25 x 10^6, Purcell factors up to 1.43 x 10^5, and cooperativities of approximately 280-5000, corresponding to cavity-coupled emission fractions exceeding 99.6%. The asymmetric cavities direct approximately 90% of emitted power into a single on-chip waveguide while maintaining cooperativity above 280. Under nanometer-scale fabrication perturbations, all four designs remain within the high-cooperativity regime, and high cooperativity persists when the cavity quality factor is constrained to a realistic absorption-limited value of 10^5. This unified, fabrication-compatible framework establishes a scalable cavity-design route for silicon telecom spin-photon interfaces and, to our knowledge, the first cavity designs for the Al1 center.
The paper addresses how to enhance coherent telecom-band emission from silicon T-center and Al1-center spin defects while coupling the resulting photons into integrated waveguides. Both defects have limited coherent zero-phonon emission, motivating cavity-enhanced spin–photon interfaces.
A unified adjoint inverse-design framework optimizes silicon nanobeam cavities for Purcell enhancement, resonance alignment, and photon extraction. Four designs are considered: a symmetric cavity targeting maximum Purcell enhancement and an asymmetric cavity targeting directional waveguide coupling for each emitter. Three-dimensional finite-difference time-domain simulations give loaded quality factors up to 3.25×106, Purcell factors up to 1.43×105, and cooperativities of approximately 280–5000. These cooperativities correspond to reported cavity-coupled emission fractions above 99.6%. The asymmetric designs direct approximately 90% of emitted power into a single on-chip waveguide while retaining cooperativity above 280.
Robustness is assessed through nanometer-scale fabrication perturbations, under which all four designs remain in the high-cooperativity regime. High cooperativity also persists when the cavity quality factor is constrained to an absorption-limited value of 105. The results are simulation-based; no fabricated-device measurements or experimental spin–photon-interface demonstration are reported in the abstract. The abstract identifies fabrication perturbations and absorption-limited quality factors as practical constraints, but does not provide the detailed perturbation ranges or the emitter parameters used to estimate cooperativity.
Implementation of large-scale quantum networks have the potential to augment the capabilities of existing quantum information technologies. By linking quantum processors over photonic channels, future quantum networks could enable applications such as remote quantum sensing, distributed quantum computing, and secure quantum communication. Atomic defects in solids are readily integrated with photonic structures, making them promising candidates for use in quantum networking devices. In particular, the silicon material platform holds great promise due to the technologically mature silicon electronic and photonic industries. The T center defects in silicon possess telecom O-band optical transitions, as well as long-lived electronic and nuclear spins, making it the focus of particular interest. These spin and optical properties of single T centers, together with their accessibility to the existing integrated electronic and photonic technologies, opening the door to modular long-distance quantum networking technologies built on the T center platform. This work outlines the integration of single T centers with a silicon photonic crystal cavity; we observe cavity-enhanced fluorescence emission, resulting in a decay rate enhancement factor of F = 6.89 compared to the bulk emission rate. Through the use of silicon photonic circuits and an angle-polished fiber for light coupling, we achieve a maximum zero phonon line photon outcoupling rate of 73.3 kHz. The design and fabrication of the nanophotonic cavity used in experiment is detailed. This work represents a major step towards use of the silicon T center as a telecom spin-photon interface in future quantum networking applications.
Silicon is an attractive host for scalable quantum photonics, but the absence of bright telecom-band emitters with optically addressable spin states has limited its use for spin-photon interfaces. Here we demonstrate the Al1-center, an aluminum--carbon defect in silicon, as a bright waveguide-integrated single-photon emitter with a ground-state spin. Using isotopically purified silicon-on-insulator nanophotonic devices, we isolate individual Al1-centers and observe high-purity single-photon emission with g(2)(0)=0.04 without background subtraction. Time-resolved photoluminescence spectroscopy reveals a fast excited-state lifetime of 135 ns, nearly an order of magnitude shorter than the benchmark provided by the well-studied T-center. Resonant photoluminescence excitation measurements further resolve the zero-phonon transition and reveal a narrow homogeneous linewidth reaching 47 MHz, threefold narrower than the T-center under comparable temperature. Through magneto-optical spectroscopy, we resolve the spin-dependent transitions of the bound-exciton manifold and achieve spin-selective optical pumping, fulfilling the prerequisite for quantum state initialization and readout. These results establish the Al1-center as a bright telecom-band spin-photon interface in silicon photonics and introduce a promising platform for integrated quantum networks.
Quantum networking is a crucial technology towards constructing large-scale distributed quantum systems. The structure of photonic link and distributed network nodes allows high-speed and high-fidelity interconnect, enabling various applications such as distributed quantum computing and sensing, as well as secure quantum communications. Optically interfaced solid-sate spins are promising candidates for building a quantum network due to their active spin-photon interfaces, compatibility, and scalability for device integration. Especially for defect spins in silicon, the platform benefits from mature silicon photonic industry, and can access to the integration techniques developed over the past decades. T center in silicon particularly holds great expectations because of the telecom-O band optical interface, ground state doublet spin manifold, and long-lived nuclear spin coherence. Their telecom spin-photon interface provides a direct link between stationary quantum memory and flying qubits that are compatible with the existing telecommunication fiber network infrastructure. This work focuses on investigating cavity quantum electrodynamics (cQED) for cavity-coupled single T centers, its applications in quantum optical control of T center optical properties, and in realizing single-shot spin state readout. The cavity enhanced light-matter interaction mitigates the caveats of T center, such as long radiative lifetime, low Debye-Waller factor, and lack of polarization selection rule for the optical transitions. In this work, by integrating single T centers with a low-loss, small mode volume silicon photonic cavity, we have achieved the Purcell enhancement for boosting the T center fluorescence rate with a factor of 6.89. We build up the theoretical framework based on the Jaynes-Cummings model and Lindblad master equation to explain experimental observations and reveal cQED parameters. The further study on the electronic spin state readout is carried out as the fast, high-fidelity single-shot readout is critical for quantum information processing. Two methods are proposed based on realistic cQED parameters: resonant fluorescence readout in the low-cooperativity regime and spin-dependent cavity-reflection readout for intermediate- and high-cooperativity regimes. Both approaches demonstrate feasibility of high-fidelity (F > 0.95) readout, particularly the reflection readout allows F > 0.99 within a short readout time of 50 μs. This work demonstrates a promising telecom spin-photon interface with high-fidelity readout based on cavity-coupled single T centers in silicon, which are promising candidates for building future large-scale quantum networks.
Solid-state spin-based quantum systems have emerged as popular platforms for quantum networking applications due to their optical interfaces, their long-lived quantum memories, and their natural compatibility with semiconductor manufacturing. Photonic crystal cavities are often used to enhance radiative emission; however, fabrication of the necessary subwavelength cavities is typically limited to small batch electron beam lithography. In this work, we demonstrate high quality factor, small mode volume nanobeam cavities fabricated on a scalable silicon photonic foundry platform. The foundry fabricated cavities are then interfaced with single erbium ions through backend deposition of TiO 2 thin films lightly doped with erbium. Single ion lifetime measurements indicate Purcell enhancement up to about 500, thereby demonstrating a route toward manufacturable deterministic single photon sources in the telecom C-band.
Generating single photons on demand in silicon is a challenge to the scalability of silicon-on-insulator integrated quantum photonic chips. While several defects acting as artificial atoms have recently demonstrated an ability to generate antibunched single photons, practical applications require tailoring of their emission through quantum cavity effects. In this work, we perform cavity quantum electrodynamics experiments with ensembles of artificial atoms embedded in silicon-on-insulator microresonators. The emitters under study, known as W color centers, are silicon tri-interstitial defects created upon self-ion implantation and thermal annealing. The resonators consist of circular Bragg grating cavities, designed for moderate Purcell enhancement ( F p = 12.5) and efficient luminescence extraction (η coll = 40% for a numerical aperture of 0.26) for W centers located at the mode antinode. When the resonant frequency mode of the cavity is tuned with the zero-phonon transition of the emitters at 1218 nm, we observe a 20-fold enhancement of the zero-phonon line intensity, together with a 2-fold decrease of the total relaxation time in time-resolved photoluminescence experiments. Based on finite-difference time-domain simulations, we propose a detailed theoretical analysis of Purcell enhancement for an ensemble of W centers, considering the overlap between the emitters and the resonant cavity mode. We obtain a good agreement with our experimental results assuming a quantum efficiency of 65 ± 10% for the emitters in bulk silicon. Therefore, W centers open promising perspectives for the development of on-demand sources of single photons by harnessing cavity quantum electrodynamics in silicon photonic chips.
Integrated quantum photonics holds significant promise for scalable photonic quantum information processing, quantum repeaters, and quantum networks, but its development is hindered by the mismatch between materials hosting high-quality quantum emitters and those compatible with mature photonic technologies. Heterogeneous integration offers a potential solution to this challenge, yet practical implementations have been limited by inevitable insertion losses at material interfaces. Here, we present a self-aligned heterogeneous quantum photonic integration approach that can deterministically achieve near-unity coupling efficiency at the interface. To showcase our approach, we demonstrate Purcell enhancement of a silicon vacancy (SiV) center in diamond induced by a heterogeneous photonic crystal cavity defined by titanium dioxide (TiO2), as well as optical spin control and readout via a TiO2 photonic circuit. We further show that, when combined with inverse photonic design, our approach enables efficient and broadband collection of single photons from a color center into a heterogeneous waveguide. Our approach is not restricted to SiV centers or TiO2; it can be broadly applied to integrate diverse solid-state quantum emitters with thin-film photonic devices where conformal deposition is possible. Together, these results establish a practical route to scalable quantum photonic integrated circuits that combine high-quality quantum emitters with technologically mature photonic platforms.