Increasing connectivity and decreasing qubit-state delocalization without compromising the speed and accuracy of elementary gate operations are topical challenges in the development of large-scale superconducting quantum computers. In this theoretical work, we study a special honeycomb qubit lattice where each qubit inside a unit cell is coupled to every other one via two dedicated tunable couplers and a common central element. This results in an effective multi-mode interaction enabling tunable, on-demand, all-to-all connectivity between each qubit pair within the unit cell. We provide a thorough analysis of the unit cell, including a proposal for a novel and efficient conditional-Z gate scheme which takes advantage of the effective multi-mode coupling. We develop an experimentally viable pulse protocol for a single-step gate implementation which considerably improves the gate speed compared to the previous two-qubit-gate realizations suggested for architectures utilizing a center mode. We also show numerical results on how the presence of spectator qubits affects the average two-qubit-gate fidelity, and analyse how the multi-mode coupling structure mitigates the delocalization-induced crosstalk during simultaneous single-qubit gates within the unit cell. We also provide analytical estimates for the errors caused by relaxation and dephasing during a two-qubit-gate operation, including noise terms for the multi-mode coupling structure. Our multi-mode coupling architecture results in a good balance between increased connectivity and available parallelism, especially when several interacting unit cells form a quantum processing unit. We anticipate that the obtained results pave the way towards high-connectivity quantum processors with efficient and low-overhead quantum algorithms.
Increasing connectivity and decreasing qubit-state delocalization without compromising the speed and accuracy of elementary gate operations are topical challenges in the development of large-scale superconducting quantum computers. In this theoretical work, we study a special honeycomb qubit lattice where each qubit inside a unit cell is coupled to every other one via two dedicated tunable couplers and a common central element. This results in an effective multi-mode interaction enabling tunable, on-demand, all-to-all connectivity between each qubit pair within the unit cell. We provide a thorough analysis of the unit cell, including a proposal for a novel and efficient conditional-Z gate scheme which takes advantage of the effective multi-mode coupling. We develop an experimentally viable pulse protocol for a single-step gate implementation which considerably improves the gate speed compared to the previous two-qubit-gate realizations suggested for architectures utilizing a center mode. We also show numerical results on how the presence of spectator qubits affects the average two-qubit-gate fidelity, and analyse how the multi-mode coupling structure mitigates the delocalization-induced crosstalk during simultaneous single-qubit gates within the unit cell. We also provide analytical estimates for the errors caused by relaxation and dephasing during a two-qubit-gate operation, including noise terms for the multi-mode coupling structure. Our multi-mode coupling architecture results in a good balance between increased connectivity and available parallelism, especially when several interacting unit cells form a quantum processing unit. We anticipate that the obtained results pave the way towards high-connectivity quantum processors with efficient and low-overhead quantum algorithms.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.
Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.
Superconducting transmon processors represent a leading platform for large-scale quantum computing due to their high gate fidelities and scalability. However, conventional qubit-coupler-qubit (QCQ) architectures face critical physical and structural bottlenecks, notably frequency crowding [spectator qubit collisions] during system scaling and inefficient mapping onto the standard surface code.To overcome these limitations, we propose a novel lattice-patch architecture that couples four fixed-frequency transmons to a single fixed-frequency coupler.This design enhances qubit connectivity and maps directly onto the surface-code lattice unit [plaquette], thereby minimizing the compilation overhead associated with logical qubit implementation. Furthermore, utilizing an entirely fixed-frequency design intrinsically eliminates susceptibility to external flux noise, ensuring robust operational stability.Multi-level numerical simulations demonstrate CNOT gate fidelities exceeding 0.98 across all six connectivity directions within the patch. Nevertheless, the complex interaction network of the four-qubit architecture induces unintended residual phase accumulation during cross-resonance driving. This parasitic effect necessitates precise calibration, achievable via virtual Rz gates [software phase updates]. Ultimately, our results establish the lattice-patch architecture as an efficient, robust building block for future fault-tolerant quantum computers.
Superconducting circuits are well established as a viable candidate for the realisation of quantum computers. Circuits based on the transmon qubit are now ubiquitous, owing to its simple design and reduced control wiring overhead. An issue with transmon qubit-based architectures is the always-on unwanted interactions that impose limits on gate speeds and introduce errors into their operation. In addition, understanding sources of noise and decoherence is essential to the low-error operation quantum computers. This thesis describes the implementation of a multi-mode superconducting qubit in a coaxial circuit QED architecture. Constructed from three superconducting islands, connected via two Josephson junctions, the device possesses two transmon-like modes with orthogonal field symmetries. The unique polarisation of each mode allows for engineering dissipation and coupling in the system, extending functionality beyond the single-mode transmon. Experimental results on the unit-cell of the two-mode coaxial transmon are presented, demonstrating coherent control and simultaneous dispersive readout of the modes of the device. A predictive theory of charge sensitivity in a multi-mode superconducting qubit is presented, and experimental results in agreement of this theory are shown, observing sensitivity to four charge-parity configurations and two independent gate-charge offsets. The utility of a multi-mode qubit as a charge detector in spatially tracking local-charge drift of ≃ 100 µm length scales is also shown, demonstrating the use of these devices as tools in understanding charge noise in superconducting circuits. Finally, a system of a pair of coupled two-mode coaxial transmons is introduced, demonstrating a highly mode-selective coupling architecture. A suppressed quantum crosstalk of 2 kHz between protected modes of the devices is measured, along with equal single qubit gate fidelities when operated both individually and simultaneously. A first characterisation of a microwave activated conditional phase interaction between computational modes driven via ancillary transitions (AT-MAP) is presented. Whilst not shown in this work, this state-dependent two-qubit interaction can be used to generate entanglement. Combined with the low crosstalk demonstrated, this shows the multi-mode qubit architecture is a promising candidate for the construction of larger scale quantum processors with fast gates and low crosstalk-related errors.
A central challenge in fluxonium-based quantum processors is the extension of the qubit connectivity to two-dimensional lattices compatible with quantum code-error correction. Here, we present a fluxonium quantum processor that employs lumped-element resonator couplers which realizes, for the first time, a connectivity-four unit cell with suppressed parasitic interactions. We achieve parallel single-qubit gate fidelities exceeding 99.9 % in simultaneous randomized benchmarking experiments, while maintaining residual static ZZ interactions below 1 kHz across all coupled qubit pairs. We implement resonator-induced phase (RIP) gates and benchmark two-qubit gate fidelities exceeding 99 % using interleaved randomized benchmarking. To cancel spectator errors observed in two-qubit operations, we implement a refocused RIP gate, recovering coherent control in the presence of multi-qubit connectivity. Furthermore, we prepare Greenberger-Horne-Zeilinger states of up to five qubits with a tomographic fidelity of 90 %, verifying multi-qubit entanglement within the unit cell. These results establish the fluxonium-resonator-fluxonium architecture as a viable approach to realizing densely connected fluxonium processors and provide a scalable path toward quantum error-correction-compatible processor architectures.
Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but with only two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multidimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this Letter, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on:off ratio. It therefore offers both high efficiency and low crosstalk between qutrits, thus being friendly for scaling up. Our Letter constitutes an important step toward scalable qutrit-based quantum computation.