Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.06499

Methods for characterization of atomic-scale field emission point-electron-source

Shuai Tang, Mingkai Gou, Yingzhou Hu, Jie Tang, Yan Shen, Yu Zhang, Lu-Chang Qin, Ningsheng Xu, Richard G. Forbes, Shaozhi Deng

quant-phcond-mat.mes-hallSubmitted Mar 6, 2026• Announced Mar 9, 2026• Revised Mar 13, 2026 (v2)
v1 · Mar 6, 2026v2 · Mar 13, 2026
arXivHTMLPDF

Abstract

Field emission (FE) electron sources are made close to atomic-scale to reach the highest spatial resolution as well as stable emission for electron microscopy, electron beam inspection and lithography. At present, no single agreed method exists of using FE current-voltage data to extract the apparent emission area, which is needed for predicting some beam properties. The 1956 theory of Murphy and Good (MG) is better physics than the 1920s theory of Fowler and Nordheim (FN) and colleagues, but many researchers use simplified FN theory to analyse experimental data. The present paper reports an experimental method of finding apparent emission area, based on using field ion and field electron microscopes (FIM-FEM). The discrepancy of emission area between the FIM-FEM method and MG-based analysis is a factor of 7.4, while that with simplified FN-based analysis is about 25, confirming MG theory is better for FE data analysis. The result allows deduction of key indicators, including source energy spread, reduced brightness and emission efficiency. A downloadable program is made available to help analysis. Our work provides a new experimental method of characterizing FE electron sources, especially the atomic-scale cold cathode, for which existing plot-based data-analysis methods are not suitable.

Comments
41 pages (including Electronic Supplementary Material), 4 combination figures in main paper, v2 (with typo corrected)

Related papers

A numerical and efficient model for thermo-field electron emission calculations

Salvador Barranco Cárceles, Andreas Kyritsakis, Anthony Ayari

As electron sources are reduced in size, fabricated in new materials, or pushed for performance, the analytical formulations for thermo-field electron emission, namely Fowler-Nordheim and Murphy-Good equations and their JWKB-based extensions, are increasingly applied out of the range of conditions for which they were derived. We present GETELEC-3, an open-source code that replaces them with a direct numerical solution of the one-dimensional time-independent Schrödinger equation (1D-TISE). Several methods to solve the 1D-TISE have been implemented to test for speed, robustness, and solution's uncertainty. The Noumerov algorithm is found to be quickest, with the solution uncertainty below 1%, and together with an optimised kernel that advances all electron energies in parallel, the cost of calculating the current density is reduced to a few milliseconds - comparable to the JWKB evaluation. To further boost the calculation speed, especially in complicated barriers, a neural network has been trained on the residual of the logarithm of the semiclassical reference and it reproduces the current density better than 0.4% at a fraction of the computational cost. The code is developed for metals and semiconductors, accepts arbitrary potentials and density of states, and comes with a user-friendly interface and compiled executable to democratise rigorous electron emission calculations and data analysis.

cond-mat.stat-mechCross-listedarXiv:2610.07013•Oct 6, 2026

Summary overview of present state of basic electrostatic field electron emission theory

Richard G. Forbes

This technical note provides a high-level overview of the present state of basic field electron emission (FE) theory, as suitable for use in the context of technological applications of FE theory. At present there is much theoretical confusion in FE literature, and a partial breakdown of the peer review system. Even in sensitive technological contexts, many papers have stated and used out-of-date theory that makes current-density predictions that are several hundred times less than those of modern FE theory. A primary aim of this note is to help reduce the confusion and error in future published FE literature. It is not intended as a detailed review of FE theory.

cond-mat.mes-hallCross-listedarXiv:2603.16033•Mar 18, 2026

Field emission tunnelling as a window onto fundamental issues in quantum mechanics

Richard G. Forbes

Field electron emission (FE) and electrostatic field ionization (ESFI) are quantum-mechanical tunnelling processes that provide basic theory for important technologies. However, the basic theories of FE and ESF1 are not yet completely understood. This paper attempts to identify related fundamental quantum mechanical issues, problems and relevances. The following topics have been identified as deserving closer investigation or discussion. (a) The implication that if a "real electron" cannot have negative kinetic energy, then this necessarily implies that a "real electron" is a distributed object rather than a point object. (b) The implication that the language we use to discuss quantum mechanics needs to be changed in order to avoid referring to the "position of a (point) electron". (c) The idea that "quantum mathematics" (i.e., the mathematics of quantum mechanics) has different utilisations, namely the "matter distribution" and "pathway choice" utilisations, with "measurement" being observed pathway choice. (d) Difficulties with the present formulations of the uncertainty principle and wave-particle duality. (e) Fundamental difficulties in the exact calculation of exchange-and-correlation effects in both FE and ESFI theory. (f) Conceptual problems associated with "seeing electrons" in the field electron (emission) microscope. (g) Field emission tunnelling and the arrow of time. (h) The choice between tunnelling-integral and overlap-integral formulations of tunnelling theory, and the apparent incompleteness of both types of formulation.

arXiv:2505.00872•WORLD SCIENTIFIC eBooks•Jul 1, 2026•0 citations

Wave aspects of electron and ion emission from point sources

Johann Summhammer, Jörg Schmiedmayer

Electrons emitted from single-atom tips are analysed in a model with the tip as a round tubelike constriction. The source creates two-dimensional minimum wavepackets whose temporal evolution agrees well with observed beam divergences. With few-atom tips interference effects may arise due to the electron's non localized emission from several atoms. The phase space density of emitted electrons is around 10 −2 h −3 , and electron-electron correlation experiments become feasible. In ion field emission mode observed beam divergences are dominated by thermal broadening and other effects rather than quantum mechanical principles. Applications include electron interferometers of lower energy and wider beam separation than hitherto in use, as well as proton and possibly other ion interferometers. Highly focused low energy beams could also be produced.

Physica Scripta•Jul 1, 1990•5 citations

Cesium Rydberg-state ionization study by three-dimensional ion-electron correlation: Toward a monochromatic electron source

Raphaël Hahn, Azer Trimeche, C. Lopez +2 more

We study the excitation and ionization of cesium Rydberg states in an electric field ($\ensuremath{\approx}\phantom{\rule{0.16em}{0ex}}2200\phantom{\rule{4pt}{0ex}}\mathrm{V}/\mathrm{cm}$) near the classical field-ionization threshold ($\ensuremath{\approx}\ensuremath{-}280\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}$ binding energy) by three-dimensional (3D) ion-electron coincidence spectroscopy. Cesium atoms are produced by an effusive oven and excited with lasers to Stark-shifted Rydberg states or directly ionized. Using a double time-of-flight setup we record 3D ($X, Y$, time of flight) coincidence imaging of electrons and ions. Above-threshold photoionization creates broad images with poor electron-ion spatial correlation. Fast ionizing states produce very good correlations and the images reveal the electric-field map of the ionization region. Slow ionizing states show that the relatively high atomic velocity is detrimental to the correlations. Experimental data are accurately reproduced by detailed Monte Carlo excitation and ionization simulations based on Stark maps obtained with local-frame transformation (LFT) theory. Agreement between our spectroscopic experiment and LFT theory is very good, with better that hundreds of megahertz accuracy. But, on rare particular states, several gigahertz discrepancy is found. This study can be used to select appropriate states for the creation of ion and electron beams with high brightness, good correlation, and low energy dispersion.

Physical Review A•Apr 30, 2021•7 citations

The AC-MOT cold atom electron source

Michael E. Jones

This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.

•May 31, 2019•1 citation
Field emission (FE) electron sources are made close to atomic-scale to reach the highest spatial resolution as well as stable emission for electron microscopy, electron beam inspection and lithography. At present, no single agreed method exists of using FE current-voltage data to extract the apparent emission area, which is needed for predicting some beam properties. The 1956 theory of Murphy and Good (MG) is better physics than the 1920s theory of Fowler and Nordheim (FN) and colleagues, but many researchers use simplified FN theory to analyse experimental data. The present paper reports an experimental method of finding apparent emission area, based on using field ion and field electron microscopes (FIM-FEM). The discrepancy of emission area between the FIM-FEM method and MG-based analysis is a factor of 7.4, while that with simplified FN-based analysis is about 25, confirming MG theory is better for FE data analysis. The result allows deduction of key indicators, including source energy spread, reduced brightness and emission efficiency. A downloadable program is made available to help analysis. Our work provides a new experimental method of characterizing FE electron sources, especially the atomic-scale cold cathode, for which existing plot-based data-analysis methods are not suitable.
As electron sources are reduced in size, fabricated in new materials, or pushed for performance, the analytical formulations for thermo-field electron emission, namely Fowler-Nordheim and Murphy-Good equations and their JWKB-based extensions, are increasingly applied out of the range of conditions for which they were derived. We present GETELEC-3, an open-source code that replaces them with a direct numerical solution of the one-dimensional time-independent Schrödinger equation (1D-TISE). Several methods to solve the 1D-TISE have been implemented to test for speed, robustness, and solution's uncertainty. The Noumerov algorithm is found to be quickest, with the solution uncertainty below 1%, and together with an optimised kernel that advances all electron energies in parallel, the cost of calculating the current density is reduced to a few milliseconds - comparable to the JWKB evaluation. To further boost the calculation speed, especially in complicated barriers, a neural network has been trained on the residual of the logarithm of the semiclassical reference and it reproduces the current density better than 0.4% at a fraction of the computational cost. The code is developed for metals and semiconductors, accepts arbitrary potentials and density of states, and comes with a user-friendly interface and compiled executable to democratise rigorous electron emission calculations and data analysis.
This technical note provides a high-level overview of the present state of basic field electron emission (FE) theory, as suitable for use in the context of technological applications of FE theory. At present there is much theoretical confusion in FE literature, and a partial breakdown of the peer review system. Even in sensitive technological contexts, many papers have stated and used out-of-date theory that makes current-density predictions that are several hundred times less than those of modern FE theory. A primary aim of this note is to help reduce the confusion and error in future published FE literature. It is not intended as a detailed review of FE theory.
Field electron emission (FE) and electrostatic field ionization (ESFI) are quantum-mechanical tunnelling processes that provide basic theory for important technologies. However, the basic theories of FE and ESF1 are not yet completely understood. This paper attempts to identify related fundamental quantum mechanical issues, problems and relevances. The following topics have been identified as deserving closer investigation or discussion. (a) The implication that if a "real electron" cannot have negative kinetic energy, then this necessarily implies that a "real electron" is a distributed object rather than a point object. (b) The implication that the language we use to discuss quantum mechanics needs to be changed in order to avoid referring to the "position of a (point) electron". (c) The idea that "quantum mathematics" (i.e., the mathematics of quantum mechanics) has different utilisations, namely the "matter distribution" and "pathway choice" utilisations, with "measurement" being observed pathway choice. (d) Difficulties with the present formulations of the uncertainty principle and wave-particle duality. (e) Fundamental difficulties in the exact calculation of exchange-and-correlation effects in both FE and ESFI theory. (f) Conceptual problems associated with "seeing electrons" in the field electron (emission) microscope. (g) Field emission tunnelling and the arrow of time. (h) The choice between tunnelling-integral and overlap-integral formulations of tunnelling theory, and the apparent incompleteness of both types of formulation.
Electrons emitted from single-atom tips are analysed in a model with the tip as a round tubelike constriction. The source creates two-dimensional minimum wavepackets whose temporal evolution agrees well with observed beam divergences. With few-atom tips interference effects may arise due to the electron's non localized emission from several atoms. The phase space density of emitted electrons is around 10 −2 h −3 , and electron-electron correlation experiments become feasible. In ion field emission mode observed beam divergences are dominated by thermal broadening and other effects rather than quantum mechanical principles. Applications include electron interferometers of lower energy and wider beam separation than hitherto in use, as well as proton and possibly other ion interferometers. Highly focused low energy beams could also be produced.
We study the excitation and ionization of cesium Rydberg states in an electric field ($\ensuremath{\approx}\phantom{\rule{0.16em}{0ex}}2200\phantom{\rule{4pt}{0ex}}\mathrm{V}/\mathrm{cm}$) near the classical field-ionization threshold ($\ensuremath{\approx}\ensuremath{-}280\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}$ binding energy) by three-dimensional (3D) ion-electron coincidence spectroscopy. Cesium atoms are produced by an effusive oven and excited with lasers to Stark-shifted Rydberg states or directly ionized. Using a double time-of-flight setup we record 3D (X,YX, YX,Y, time of flight) coincidence imaging of electrons and ions. Above-threshold photoionization creates broad images with poor electron-ion spatial correlation. Fast ionizing states produce very good correlations and the images reveal the electric-field map of the ionization region. Slow ionizing states show that the relatively high atomic velocity is detrimental to the correlations. Experimental data are accurately reproduced by detailed Monte Carlo excitation and ionization simulations based on Stark maps obtained with local-frame transformation (LFT) theory. Agreement between our spectroscopic experiment and LFT theory is very good, with better that hundreds of megahertz accuracy. But, on rare particular states, several gigahertz discrepancy is found. This study can be used to select appropriate states for the creation of ion and electron beams with high brightness, good correlation, and low energy dispersion.
This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.