We propose a method to directly recover the degree of entanglement distributed by entanglement swapping in the presence of noise. Our approach introduces a reversing operation that probabilistically undoes the effect of amplitude damping or photon loss on a single entangled pair, enabling heralded recovery of entanglement. We demonstrate that entanglement can be substantially recovered even under strong noise, including parameter regimes where the distributed entanglement would otherwise vanish due to entanglement sudden death. We analyze the effectiveness of the protocol in two representative repeater models, i.e.,~two-way and one-way architectures and identify the optimal reversing strategy. Due to its heralded and single-copy nature, our protocol is readily compatible with other entanglement recovery techniques such as entanglement purification and distillation. Our work provides a practical and experimentally feasible way toward robust entanglement distribution in current and near-term quantum repeater architectures.
We propose a method to directly recover the degree of entanglement distributed by entanglement swapping in the presence of noise. Our approach introduces a reversing operation that probabilistically undoes the effect of amplitude damping or photon loss on a single entangled pair, enabling heralded recovery of entanglement. We demonstrate that entanglement can be substantially recovered even under strong noise, including parameter regimes where the distributed entanglement would otherwise vanish due to entanglement sudden death. We analyze the effectiveness of the protocol in two representative repeater models, i.e.,~two-way and one-way architectures and identify the optimal reversing strategy. Due to its heralded and single-copy nature, our protocol is readily compatible with other entanglement recovery techniques such as entanglement purification and distillation. Our work provides a practical and experimentally feasible way toward robust entanglement distribution in current and near-term quantum repeater architectures.
At the heart of building a large-scale quantum internet lies the challenge of establishing long-distance entanglement using quantum repeaters, which mitigate direct transmission losses but introduce additional noise in the nodes via interactions with the environment and imperfect operations. This effect has typically been studied under a simplifying Pauli channel assumption. Our study focuses on distributing end-to-end entanglement in a homogeneous, repeater-based linear quantum network operating under a non-Pauli noise, specifically, amplitude damping noise, which we refer to as amplitude damping-affected quantum network (AQN). Unlike its twirled counterpart (TAQN), where the resulting state is fully Bell-diagonal with a single parameter, we prove that the AQN produces a block-diagonal state in the Bell basis with four parameters. We develop a method for the simulation of AQN, where we keep track of these four parameters of each entangled link, along with the number of times noise acts on it, i.e., its age, until it is consumed for swapping. Our results reveal that across diverse policies, including NESTING and SWAP-ASAP, AQN consistently outperforms TAQN in terms of both fidelity and average entanglement. The benefit is most significant in the low-probability regime of elementary link generation, highly relevant for near-term experiments. Notably, we also identify the coherence-time and link-probability regions where TAQN fails while AQN succeeds in distributing end-to-end entanglement.
Abstract We introduce a merging-based quantum repeater that departs from the conventional swapping paradigm by progressively growing multipartite entanglement. In contrast to swapping-based schemes, where a single failed operation often forces the entire protocol to restart, our approach reuses previously established entanglement through iterative gap-patching, thereby reducing waiting times, improving distribution rates, and introducing enhanced flexibility in the communication requests. We analyze this protocol in the context of probabilistic operations and a time-dependent dephasing noise model. We compare it with standard repeater protocols and demonstrate a clear advantage in secret-key rate across relevant operating regimes, underscoring its potential for practical quantum communication scenarios. These results establish merging-based repeaters as a promising alternative design principle for scalable and resource-efficient quantum-network architectures.
Quantum repeater is one of the important building blocks for long distance quantum communication network. The previous quantum repeaters based on atomic ensembles and linear optical elements can only be performed with a maximal success probability of 1/2 during the entanglement creation and entanglement swapping procedures. Meanwhile, the polarization noise during the entanglement distribution process is harmful to the entangled channel created. Here we introduce a general interface between a polarized photon and an atomic ensemble trapped in a single-sided optical cavity, and with which we propose a high-efficiency quantum repeater protocol in which the robust entanglement distribution is accomplished by the stable spatial-temporal entanglement and it can in principle create the deterministic entanglement between neighboring atomic ensembles in a heralded way as a result of cavity quantum electrodynamics. Meanwhile, the simplified parity-check gate makes the entanglement swapping be completed with unity efficiency, other than 1/2 with linear optics. We detail the performance of our protocol with current experimental parameters and show its robustness to the imperfections, i.e., detuning and coupling variation, involved in the reflection process. These good features make it a useful building block in long distance quantum communication.
Multiphoton emissions constitute a fundamental source of noise in quantum repeaters and other quantum communication protocols when probabilistic photon sources are employed. In this paper it is shown that by alternating the Bell state measurement basis in concatenated entanglement swapping links one can automatically identify and discard many errors from stimulated multiphoton emissions. The proposed protocol is shown to completely eliminate the dominant quadratic growth of multiphoton errors with the length of the repeater chain. Furthermore, it is shown that the protocol can be employed in satellite-assisted entanglement distribution links to enable links which are more robust in the presence of imbalanced channel losses. The analysis introduces a convenient calculus based on Clifford algebra for modeling concatenated entanglement swapping links with multiphoton emissions. In particular, we present a compact expression for the fidelity of the Bell state produced by a repeater chain of arbitrary length including noise from double-pair emissions.
Abstract Entanglement is one of essential quantum resources in quantum information processing, playing an important role during quantum communication and computation. While any system unavoidably interacts with its surrounding environment, this thus will result in decoherence or dissipation effect. With this in mind, a natural question arises: how to recover quantum entanglement under decoherence inducing by the environmental noises. In this work, our attempt is to propose an effective strategy to optimally achieve entanglement recovery. Specifically, we derive a nontrivial condition satisfied by any operation U , i.e. ( U ⊗ I ) † ( U ̃ ⊗ I ) = f ( U ) ( I ⊗ I ) , which will definitely recover the entanglement of an arbitrary two-qubit system, and more importantly offer an explicit physical explanation towards the intrinsic mechanics of the entanglement recovery. By means of derivations, we obtain the appropriate operational strength to realize optimal entanglement recovery through taking advantage of our proposed methods. As illustrations, we apply some local operations complying with our presented strategy on validly protecting entanglement, including PT -symmetry operation, quantum weak measurement and quantum reversal measurement.
First-generation quantum repeaters are essential in distributing entanglement over long distances since they could mitigate losses in optical fiber. Repeaters split the total distance into shorter, easier to generate links. Then, entanglement swapping establishes long range entanglement by performing local measurements at the repeaters and heralding their results. In this work, we develop an analytical model that estimates the impact of decoherence during heralding for a given protocol. Furthermore, we identify a competition between two phenomena: as repeater count increases, so does entanglement generation, but the additive impact of memory decoherence on final entanglement rate increases too. Therefore, we find that an optimal number of repeaters exists. These findings could lead the design of future quantum networks, both in the inter-repeater distance and swapping timings.