Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.04450 · npj Quantum Information

Merging-based quantum repeater

Maria Flors Mor-Ruiz, Jorge Miguel-Ramiro, Julius Wallnöfer, Tim J. Coopmans, Wolfgang Dür

Published Aug 5, 2026• 6 citations
arXivHTMLPDF

Abstract

Abstract We introduce a merging-based quantum repeater that departs from the conventional swapping paradigm by progressively growing multipartite entanglement. In contrast to swapping-based schemes, where a single failed operation often forces the entire protocol to restart, our approach reuses previously established entanglement through iterative gap-patching, thereby reducing waiting times, improving distribution rates, and introducing enhanced flexibility in the communication requests. We analyze this protocol in the context of probabilistic operations and a time-dependent dephasing noise model. We compare it with standard repeater protocols and demonstrate a clear advantage in secret-key rate across relevant operating regimes, underscoring its potential for practical quantum communication scenarios. These results establish merging-based repeaters as a promising alternative design principle for scalable and resource-efficient quantum-network architectures.

DOI
10.1038/s41534-026-01340-w

Related papers

Complete analysis of a realistic fiber-based quantum repeater scheme

Adam Kinos, Andreas Walther, Stefan Kröll +1 more

We present a quantum repeater protocol for distributing entanglement over long distances, where a dedicated communication stage enables trial rates not limited by the travel time between repeater nodes. To accomplish this, each node contains several qubits that can couple to one single-photon emitter. Photons from the emitters in neighboring nodes generate heralded entanglement between qubits in these nodes. The protocol leaves the emitters disentangled from the rest of the system immediately after emitting the photons, thus allowing them to be reused to entangle other qubits without waiting for the repeater link round-trip time. This time multiplexing increases the protocol trial rate by up to an order of magnitude. The protocol is then combined with conventional deterministic entanglement swapping and heralded entanglement purification to extend the entanglement distance and reduce the entanglement error, respectively. We perform a complete protocol analysis by considering all relevant error sources, such as initialization, two-qubit gate, and qubit measurement errors, as well as the exponential decoherence of the qubits with time. The latter is particularly important since we analyze the protocol performance for a broad range of experimental parameters and obtain secret key rates ranging from 1 to 1000 Hz at a distance of 1000 km. Our results suggest that it is important to reach a qubit memory coherence time of around 1 s, and two-qubit gate and measurement errors on the order of 10 − 3 to obtain reasonable secret key rates over distances longer than achievable with direct transmission. While this work focuses on optimizing secret key rates, the protocol can also be used for Einstein-Podolsky-Rosen pair generation and is thus also relevant for, e.g., distributed quantum computing.

arXiv:2309.04151•Physical Review Research•Aug 5, 2025•5 citations

Waiting time in quantum repeaters with probabilistic entanglement swapping

Evgeny V Shchukin, Frank L. Schmidt, Peter van Loock

The standard approach to realize a quantum repeater relies upon probabilistic but heralded entangled state manipulations and the storage of quantum states while waiting for successful events. In the literature on this class of repeaters, calculating repeater rates has typically depended on approximations assuming sufficiently small probabilities. Here we propose an exact and systematic approach including an algorithm based on Markov chain theory to compute the average waiting time (and hence the transmission rates) of quantum repeaters with arbitrary numbers of links. For up to four repeater segments, we explicitly give the exact rate formulas for arbitrary entanglement swapping probabilities. Starting with three segments, we explore schemes with arbitrary (not only doubling) and dynamical (not only predetermined) connections. The effect of finite memory times is also considered and the relative influence of the classical communication (of heralded signals) is shown to grow significantly for larger probabilities. Conversely, we demonstrate that for small swapping probabilities the statistical behavior of the waiting time in a quantum repeater cannot be characterized by its average value alone and additional statistical quantifiers are needed. For large repeater systems, we propose a recursive approach based on exactly but still efficiently computable waiting times of sufficiently small subrepeaters. This approach leads to better lower bounds on repeater rates compared to existing schemes.

arXiv:1710.06214•Physical Review A•Sep 16, 2019•112 citations

Generalized Quantum Repeater Graph States

Bikun Li, Kenneth Goodenough, Filip Rozpędek +1 more

All-photonic quantum repeaters are essential for establishing long-range quantum entanglement. Within repeater nodes, reliably performing entanglement swapping is a key component of scalable quantum communication. To tackle the challenge of probabilistic Bell state measurement in linear optics, which often leads to information loss, various approaches have been proposed to ensure the loss tolerance of distributing a single ebit. We have generalized previous work regarding repeater graph states with elaborate connectivity, enabling the efficient establishment of exploitable ebits at a finite rate with high probability. We demonstrate that our new scheme significantly outperforms the previous work with much flexibility and discuss the generation overhead of such resource states. These findings offer new insights into the scalability and reliability of loss-tolerant quantum networks.

arXiv:2407.01429•Physical Review Letters•May 12, 2025•20 citations

Optimal Entanglement Swapping in Quantum Repeaters

Evgeny V Shchukin, Peter van Loock

We formulate the problem of finding the optimal entanglement swapping scheme in a quantum repeater chain as a Markov decision process and present its solution for different repeaters' sizes. Based on this, we are able to demonstrate that the commonly used "doubling" scheme for performing probabilistic entanglement swapping of probabilistically distributed entangled qubit pairs in quantum repeaters does not always produce the best possible raw rate. Focusing on this figure of merit, without considering additional probabilistic elements for error suppression such as entanglement distillation on higher "nesting levels," our approach reveals that a power-of-two number of segments has no privileged position in quantum repeater theory; the best scheme can be constructed for any number of segments. Moreover, classical communication can be included into our scheme, and we show how this influences the raw waiting time for different numbers of segments, confirming again the optimality of "nondoubling" in some relevant parameter regimes. Thus, our approach provides the minimal possible waiting time of quantum repeaters in a fairly general physical setting.

arXiv:2109.00793•Physical Review Letters•Apr 13, 2022•72 citations

Design and Evaluation of Communication Protocols for Quantum Repeater Networks

Luciano Aparicio

When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.

•Sep 27, 2011•2 citations

Repeat-until-success quantum repeaters

David Edward Bruschi, Thomas M. Barlow, Mohsen Razavi +1 more

We propose a repeat-until-success protocol to improve the performance of probabilistic quantum repeaters. Conventionally, these rely on passive static linear-optics elements and photodetectors to perform Bell-state measurements (BSMs) with a maximum success rate of 50%. This is a strong impediment for entanglement swapping between distant quantum memories. Every time a BSM fails, entanglement needs to be redistributed between the corresponding memories in the repeater link. The key ingredients of our scheme are repeatable BSMs. Under ideal conditions, these turn probabilistic quantum repeaters into deterministic ones. Under realistic conditions, our protocol too might fail. However, using additional threshold detectors now allows us to improve the entanglement generation rate by almost orders of magnitude, at a nominal distance of 1000 km, compared to schemes that rely on conventional BSMs. This improvement is sufficient to make the performance of our scheme comparable to the expected performance of some deterministic quantum repeaters.

arXiv:1407.3362•Physical Review A•Sep 5, 2014•22 citations
Abstract We introduce a merging-based quantum repeater that departs from the conventional swapping paradigm by progressively growing multipartite entanglement. In contrast to swapping-based schemes, where a single failed operation often forces the entire protocol to restart, our approach reuses previously established entanglement through iterative gap-patching, thereby reducing waiting times, improving distribution rates, and introducing enhanced flexibility in the communication requests. We analyze this protocol in the context of probabilistic operations and a time-dependent dephasing noise model. We compare it with standard repeater protocols and demonstrate a clear advantage in secret-key rate across relevant operating regimes, underscoring its potential for practical quantum communication scenarios. These results establish merging-based repeaters as a promising alternative design principle for scalable and resource-efficient quantum-network architectures.
We present a quantum repeater protocol for distributing entanglement over long distances, where a dedicated communication stage enables trial rates not limited by the travel time between repeater nodes. To accomplish this, each node contains several qubits that can couple to one single-photon emitter. Photons from the emitters in neighboring nodes generate heralded entanglement between qubits in these nodes. The protocol leaves the emitters disentangled from the rest of the system immediately after emitting the photons, thus allowing them to be reused to entangle other qubits without waiting for the repeater link round-trip time. This time multiplexing increases the protocol trial rate by up to an order of magnitude. The protocol is then combined with conventional deterministic entanglement swapping and heralded entanglement purification to extend the entanglement distance and reduce the entanglement error, respectively. We perform a complete protocol analysis by considering all relevant error sources, such as initialization, two-qubit gate, and qubit measurement errors, as well as the exponential decoherence of the qubits with time. The latter is particularly important since we analyze the protocol performance for a broad range of experimental parameters and obtain secret key rates ranging from 1 to 1000 Hz at a distance of 1000 km. Our results suggest that it is important to reach a qubit memory coherence time of around 1 s, and two-qubit gate and measurement errors on the order of 10 − 3 to obtain reasonable secret key rates over distances longer than achievable with direct transmission. While this work focuses on optimizing secret key rates, the protocol can also be used for Einstein-Podolsky-Rosen pair generation and is thus also relevant for, e.g., distributed quantum computing.
The standard approach to realize a quantum repeater relies upon probabilistic but heralded entangled state manipulations and the storage of quantum states while waiting for successful events. In the literature on this class of repeaters, calculating repeater rates has typically depended on approximations assuming sufficiently small probabilities. Here we propose an exact and systematic approach including an algorithm based on Markov chain theory to compute the average waiting time (and hence the transmission rates) of quantum repeaters with arbitrary numbers of links. For up to four repeater segments, we explicitly give the exact rate formulas for arbitrary entanglement swapping probabilities. Starting with three segments, we explore schemes with arbitrary (not only doubling) and dynamical (not only predetermined) connections. The effect of finite memory times is also considered and the relative influence of the classical communication (of heralded signals) is shown to grow significantly for larger probabilities. Conversely, we demonstrate that for small swapping probabilities the statistical behavior of the waiting time in a quantum repeater cannot be characterized by its average value alone and additional statistical quantifiers are needed. For large repeater systems, we propose a recursive approach based on exactly but still efficiently computable waiting times of sufficiently small subrepeaters. This approach leads to better lower bounds on repeater rates compared to existing schemes.
All-photonic quantum repeaters are essential for establishing long-range quantum entanglement. Within repeater nodes, reliably performing entanglement swapping is a key component of scalable quantum communication. To tackle the challenge of probabilistic Bell state measurement in linear optics, which often leads to information loss, various approaches have been proposed to ensure the loss tolerance of distributing a single ebit. We have generalized previous work regarding repeater graph states with elaborate connectivity, enabling the efficient establishment of exploitable ebits at a finite rate with high probability. We demonstrate that our new scheme significantly outperforms the previous work with much flexibility and discuss the generation overhead of such resource states. These findings offer new insights into the scalability and reliability of loss-tolerant quantum networks.
We formulate the problem of finding the optimal entanglement swapping scheme in a quantum repeater chain as a Markov decision process and present its solution for different repeaters' sizes. Based on this, we are able to demonstrate that the commonly used "doubling" scheme for performing probabilistic entanglement swapping of probabilistically distributed entangled qubit pairs in quantum repeaters does not always produce the best possible raw rate. Focusing on this figure of merit, without considering additional probabilistic elements for error suppression such as entanglement distillation on higher "nesting levels," our approach reveals that a power-of-two number of segments has no privileged position in quantum repeater theory; the best scheme can be constructed for any number of segments. Moreover, classical communication can be included into our scheme, and we show how this influences the raw waiting time for different numbers of segments, confirming again the optimality of "nondoubling" in some relevant parameter regimes. Thus, our approach provides the minimal possible waiting time of quantum repeaters in a fairly general physical setting.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
We propose a repeat-until-success protocol to improve the performance of probabilistic quantum repeaters. Conventionally, these rely on passive static linear-optics elements and photodetectors to perform Bell-state measurements (BSMs) with a maximum success rate of 50%. This is a strong impediment for entanglement swapping between distant quantum memories. Every time a BSM fails, entanglement needs to be redistributed between the corresponding memories in the repeater link. The key ingredients of our scheme are repeatable BSMs. Under ideal conditions, these turn probabilistic quantum repeaters into deterministic ones. Under realistic conditions, our protocol too might fail. However, using additional threshold detectors now allows us to improve the entanglement generation rate by almost orders of magnitude, at a nominal distance of 1000 km, compared to schemes that rely on conventional BSMs. This improvement is sufficient to make the performance of our scheme comparable to the expected performance of some deterministic quantum repeaters.