Gate-defined semiconductor quantum dots utilize fast electrical control to manipulate spin and charge states of individual electrons. Electrical pulse distortions can limit control fidelities but are difficult to measure at the device level. Here, we use detuning-axis pulsed spectroscopy to characterize baseband pulse distortions in a silicon double quantum-dot. We extract the gate-voltage impulse response and apply a digital pre-distortion filter to eliminate pulse distortions on timescales longer than 1~ns. With the pre-distortion, we reduce the frequency chirp of coherent exchange oscillations in a singlet-triplet qubit. Our results suggest a scalable and tuning-efficient method for characterizing pulse distortions in quantum-dot spin qubits.
Gate-defined semiconductor quantum dots utilize fast electrical control to manipulate spin and charge states of individual electrons. Electrical pulse distortions can limit control fidelities but are difficult to measure at the device level. Here, we use detuning-axis pulsed spectroscopy to characterize baseband pulse distortions in a silicon double quantum-dot. We extract the gate-voltage impulse response and apply a digital pre-distortion filter to eliminate pulse distortions on timescales longer than 1~ns. With the pre-distortion, we reduce the frequency chirp of coherent exchange oscillations in a singlet-triplet qubit. Our results suggest a scalable and tuning-efficient method for characterizing pulse distortions in quantum-dot spin qubits.
We use fast gate-voltage pulses and multiplexed RF-reflectometry charge sensing to coherently manipulate and read out multiple singlet-triplet spin qubits, within a 2D array of 12 gate-defined quantum dots in GaAs. By measuring the qubits' responses to precise timing changes of control pulses generated at room temperature, we characterize in situ the synchronization of control pulses with sub-ns resolution. These techniques are useful for calibrating the effective delay in cryogenic transmission lines for silicon quantum processors.
The charge and spin degrees of freedom of an electron constitute natural bases for constructing quantum two level systems, or qubits, in semiconductor quantum dots. The quantum dot charge qubit offers a simple architecture and high-speed operation, but generally suffers from fast dephasing due to strong coupling of the environment to the electron’s charge. On the other hand, quantum dot spin qubits have demonstrated long coherence times, but their manipulation is often slower than desired for important future applications. This talk will present experimental progress of a ‘hybrid’ qubit, formed by three electrons in a Si/SiGe double quantum dot, which combines desirable characteristics (speed and coherence) in the past found separately in qubits based on either charge or spin degrees of freedom. Using resonant microwaves, we first discuss qubit operations near the ‘sweet spot’ for charge qubit operation. Along with fast ( >GHz) manipulation rates for any rotation axis on the Bloch sphere, we implement two independent tomographic characterization schemes in the charge qubit regime: traditional quantum process tomography (QPT) and gate set tomography (GST). We also present resonant qubit operations of the hybrid qubit performed on the same device, DC pulsed gate operations of which were recently demonstrated. We demonstrate three-axis control and the implementation of dynamic decoupling pulse sequences. Performing QPT on the hybrid qubit, we show that AC gating yields π rotation process fidelities higher than 93% for X-axis and 96% for Z-axis rotations, which demonstrates efficient quantum control of semiconductor qubits using resonant microwaves. We discuss a path forward for achieving fidelities better than the threshold for quantum error correction using surface codes.
The implementation of high-fidelity quantum gates for spin qubits requires accurate control of exchange interactions between electrons confined in quantum dots, but pulse distortions can limit this control accuracy. Although linear-dynamical distortions can be compensated for by appropriately convolving the control signal, determining the necessary convolution requires detailed knowledge of the distortion's transfer function, and therefore the calibration of numerous parameters. Alternatively, control pulses can be designed to have a net-zero time integral canceling out linear-dynamical pulse distortions. We generalize net-zero pulse designs to quasi-zero pulses allowing net-positive but reduced time integrals. Using these pulse designs, we systematically develop complete gate sets for exchange-only qubits, and study the resulting tradeoffs between pulse duration, fidelity, and the required number of tunable parameters, both in simulation and experiment. We benchmark the optimized gate pulses on Intel's Tunnel Falls six-dot device and show they achieve fidelities similar to those obtained with a full filtering approach, with identical pulse durations and fewer tuning parameters. This reduction in complexity opens the door to fast and easily automated calibration schemes compatible with large-scale commercial quantum devices.
Several logical qubits and quantum gates have been proposed for semiconductor quantum dots controlled by voltages applied to top gates. The different schemes can be difficult to compare meaningfully. Here we develop a theoretical framework to evaluate disparate qubit-gating schemes on an equal footing. We apply the procedure to two types of double-dot qubits: the singlet-triplet and the semiconducting quantum dot hybrid qubit. We investigate three quantum gates that flip the qubit state: a DC pulsed gate, an AC gate based on logical qubit resonance, and a gate-like process known as stimulated Raman adiabatic passage. These gates are all mediated by an exchange interaction that is controlled experimentally using the interdot tunnel coupling g and the detuning [Symbol: see text], which sets the energy difference between the dots. Our procedure has two steps. First, we optimize the gate fidelity (f) for fixed g as a function of the other control parameters; this yields an f(opt)(g) that is universal for different types of gates. Next, we identify physical constraints on the control parameters; this yields an upper bound f(max) that is specific to the qubit-gate combination. We show that similar gate fidelities (~99:5%) should be attainable for singlet-triplet qubits in isotopically purified Si, and for hybrid qubits in natural Si. Considerably lower fidelities are obtained for GaAs devices, due to the fluctuating magnetic fields ΔB produced by nuclear spins.
Abstract In semiconductor quantum dot systems, pulse distortion is a significant source of coherent errors, which impedes qubit characterization and control. Here, we demonstrate two calibration methods using a two-qubit system as the detector to correct distortion and calibrate the transfer function of the control line. Both methods are straightforward to implement, robust against noise, and applicable to a wide range of qubit types. The two methods differ in correction accuracy and complexity. The first, coarse predistortion (CPD) method, partially mitigates distortion. The second, all predistortion (APD) method, measures the transfer function and significantly enhances exchange oscillation uniformity. Both methods use exchange oscillation homogeneity as the metric and are suitable for any qubit driven by a diabatic pulse. We believe these methods will enhance qubit characterization accuracy and operation quality in future applications.
Electron spins in semiconductor quantum dots are a promising platform for qubits. An essential step toward quantum error correction with spin qubits requires the ability to read out states and identify errors in the two-spin logical basis in a fast and high-fidelity way. Here we propose a scheme for spin singlet-triplet readout in a double quantum dot, with a superconducting resonator serving as the detector. Making use of a spin driving pulse sequence, this procedure can read out the spin states with a fidelity of 99.9 in a time 100 ns. Interestingly, this method makes use of the spin driving pulse to adjust the resonator signal field, leading to significant improvement of the spin readout. In addition, this method can be directly applied to multiplexed readout of qubits and repeated readout to identify logical errors. These results pave the way for the implementation of quantum error correction and scalable quantum processor with spin qubits.