Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2602.00745

Energy Absorption Interferometry

Stafford Withington, Willem Jellema

physics.opticsastro-ph.IMcond-mat.otherquant-phSubmitted Jan 31, 2026• Announced Feb 3, 2026
arXivHTMLPDF

Abstract

Energy Absorption Interferometry (EAI) is a technique for measuring the responsivities and complex-valued spatial polarimetric forms of the individual degrees of freedom through which a many-body system can absorb energy. It was originally formulated using the language of quantum correlation functions, making it applicable to different kinds of excitation (electromagnetic, elastic and acoustic fields). EAI has been applied in a variety of theoretical and experimental ways. It is particularly effective at characterising the multimode behaviour of ultra-low-noise far-infrared and optical devices, imaging arrays, and complete instruments, where it can be used to ensure that a system is maximally responsive to those partially coherent fields that carry signal whilst avoiding those that only carry noise. Despite its utility there is no comprehensive overview of electromagnetic EAI. In this paper we describe the theoretical foundations of the method, and present a range of new techniques in areas relating to sampling, phase referencing, mode reconstruction and noise. We present, for the first time, an analysis of how noise propagates through an experiment resulting in errors and artefacts on spectral and modal plots. A noise model is essential, because it determines the signal to noise ratio needed to ensure a given level of experimental fidelity.

AI Summary

Energy Absorption Interferometry (EAI) reconstructs the spatial and polarimetric modes through which a system absorbs energy using power measurements rather than field-resolved detection. This paper develops an electromagnetic formulation of the existing technique and examines how sampling, phase referencing, scanning errors and noise affect modal reconstruction, particularly for far-infrared and optical detectors. Two phase-locked sources illuminate the system while their relative phase is varied. The resulting fringe gives complex matrix elements of a Hermitian absorption operator; diagonalisation yields modal reception patterns and responsivities. The treatment extends to angular-domain, dual-surface and mixed near-/far-field measurements. Dual-surface data are analysed by singular-value decomposition. A single-mode reference detector removes shared differential phase errors while preserving eigenvalues and referencing recovered modes to its phase front. Thermal-background, photon-shot and readout noise are related to measurement fluctuations, followed by a Gaussian additive-noise model for the reconstructed response matrix. Numerical examples examine noise-induced spectral artefacts and mixing of nearly degenerate modes. Simulations also illustrate the benefit of matching illumination patterns to the response: 11 harmonic source fields recover the significant modes of a model Gaussian-coherence response. An electromagnetic example reconstructs absorption modes and induced currents for a $4\lambda$-wide resistive strip, including a $6\lambda$ ground plane separated by $0.25\lambda$. The stated conditions include sufficiently complete illumination, dual-basis reconstruction for nonorthogonal sources, separability for reduced line-scan sampling, and propagation that is unitary on the relevant modal subspace for dual-surface mode preservation. Nonlinear and fully stochastic extensions remain outside the developed treatment.

No sign of AI-generated textIncrementalStrong assumptions

Error found: The conversion from independent power-measurement errors to reconstructed matrix-entry errors assigns quadrature variance 2ε², whereas Eq. (eai_9) gives ε²/8, overstating the corresponding standard deviation by a factor of four.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
63 pages, 29 figures

Related papers

Quantum Optical Metrology Using Two-Photon Interference

Kyle Jordan

Optical quantum metrology uses specially-prepared states of light to probe sensitive samples. Choosing a suitable probe state allows one to extract more information per probe photon about an unknown parameter than is possible using any classical technique. In effect, these techniques improve the sensitivity of the measurement whenever the number of probe photons is constrained in some way. This thesis presents experimental and theoretical results on the use of pairs of time-frequency entangled photons in precision measurements. It begins with an overview of necessary background knowledge about quantum optics and quantum information. This is followed by a theoretical discussion on the estimation of a single delay using two-photon interference. We show that constraints on the probe photon's bandwidth complicate the measurement problem, requiring suitable optimization of the two-photon quantum state to avoid losing precision. We then consider the use of two-photon interference for linear spectroscopic measurements. Linear spectroscopy relates the absorption and phase spectrum of a sample to unknown electronic parameters. We describe a proof-of-principle experiment demonstrating that two-photon interferometric spectroscopy can be used for simultaneously measurement of both absorption and phase. This is followed by an information-theoretic discussion of the precision of this technique. For low losses, we show that the method provides phase sensitivity similar to classical interferometry while approaching the optimal absorption precision of any possible measurement. If the absorption and phase values are both related to a single unknown parameter, then our technique provides improved sensitivity to this parameter compared to both classical measurements and other quantum techniques in the presence of realistic levels of loss. We conclude with a discussion of quantum-optical coherence tomography, which is a two-photon interferometric method for determining the material structure of a sample. We present an ongoing experiment which aims to apply the method to tissue-like samples, where the quantum measurement is limited by a poor signal-to-noise ratio. Preliminary results demonstrate that this noise can be largely reduced by suitable frequency-domain filtering. This allows us to precisely determine the position of a scattering center using a few hundred detected photon pairs despite the presence of large amounts of noise. We follow this with a theoretical discussion of signal artifacts which are known to complicate the measured interferogram. We show these artifacts are due to a distinct interferometric effect, which can be distinguished from the signal of interest using the relative time delay between detected photons. We conclude with a brief discussion on possible techniques for artifact removal.

•Jan 22, 2026•0 citations

Performance bounds for high-light-level amplitude and intensity interferometry

Timothy J. Schulz, Neeraj K. Gupta

Amplitude interferometry and intensity interferometry are methods for processing the complex amplitude and the intensity, respectively, of an electromagnetic field to estimate the mutual intensity of the field at two spatial locations. Whereas complex amplitude measurements allow for the direct estimation of the mutual-intensity phase, intensity measurements do not. We consider applications for which the estimation of the magnitude or the squared magnitude of the mutual intensity is adequate, and we provide fundamental limits on the estimation accuracy of any unbiased estimator of the squared magnitude of the mutual intensity from coherent (complex amplitude) or incoherent (intensity) measurements. Our analysis is performed for the high-light-level (classical-noise-limit) case and quantifies the advantages of making the more difficult coherent measurements.

Journal of the Optical Society of America A•Jun 1, 1998•3 citations

Atoms in microcavities : detection and spectroscopy

Joanna Kenner

This thesis presents work undertaken with cold rubidium atoms interacting with an optical microcavity. The optical microcavity used is unique in its design, being formed between an optical fibre and silicon micromirror. This allows direct optical access to the cavity mode, whilst the use of microfabrication techniques in the design means that elements of the system are inherently scalable. In addition, the parameters of the system are such that a single atom has a substantial impact on the cavity field. In this system, two types of signal arise from the atoms' interaction with the cavity field; a `reflection' signal and a `fluorescence' signal. A theoretical description for these signals is presented, followed by experiments which characterise the signals under a variety of experimental conditions. The thesis then explores two areas: the use of the microcavity signals for atom detection and the investigation of how higher atom numbers and, as a result, a larger cooperative interaction between the atoms and the cavity field, impacts the signals. First, the use of these signals to detect an effective single atom and individual atoms whilst falling and trapped is explored. The effectiveness of detection is parameterised in terms of detection confidence and signal to noise ratio, detection fidelity and dynamic range. In the second part of this thesis, the effect of higher atom numbers on the reflection and fluorescence signals is investigated. A method for increasing the atom number is presented, alongside experiments investigating the impact on the measured signals. This is followed by experiments which explore the dispersive nature of the atom-cavity interaction by measuring the excitation spectrum of the system in reflection and fluorescence. In doing so, it is shown that, for weak coupling, these two signals are manifestly different.

•Mar 1, 2010•1 citation

Photon Energy Entanglement Characterization by Electronic Transition Interference

Alex Hayat, Pavel Ginzburg, Meir Orenstein

Direct characterization of photon energy-entanglement, full Bell-state analysis and energy-qubit detection are proposed, based on a coherent-control concept of two-photon absorption interferometry of electronic transition amplitudes rather then of photons, within practical room-temperature semiconductor detectors.

International Conference on Quantum Information•Jan 1, 2008•0 citations

Ultracold atomic imaging based on enhanced fringe removal method

Shuai Wang, Xi Li, Xing-Can Yao

Absorption imaging is the foundation for quantitative measurements in experiments on ultracold atoms. This technique mainly involves capturing images of both the probing light field and the atom absorption light field. In this process, the unavoidable jitter of the probing light introduces imaging noise of fringe patterns into the atomic optical density distribution OD. In conventional fringe removal algorithms, this type of noise can be normalized by constructing an optimal reference image from multiple reference images that have been actually taken, which shares similar fringe patterns to an absorption image (Fig. (a)). Although this method works well in the region without atomic signal, they often overlook the modulation of the noise signal due to atomic absorption effects, leading to persistent residual fringes on the atom clouds. This problem becomes more pronounced with atomic density increasing. Here, we propose an enhanced fringe removal algorithm that takes into account the effects of atomic absorption, and actively modulates the intensity of the noise signal in the reference image constructed by conventional fringe removal algorithms (Fig. (b)), effectively preventing the residual fringes from forming, thus significantly improving the signal-to-noise ratio of the atomic images. When applied to the absorption imaging of homogeneous Fermi gases with high density, as shown in Fig. (d), this new algorithm successfully reduces the relative standard deviation of optical depth characterizing atomic density fluctuations by approximately 37%, which is about 3 times the relative standard deviation by conventional algorithm. Three subgraphs in Fig. (e) show the optical depth distribution at corresponding data points labeled by square boxes in Fig. (d). Furthermore, we also use this technique to quantitatively determine the second sound in the unitary Fermi superfluid of 6Li atoms. Compared with conventional fringe removal methods, our new algorithm increases the correlation function’s contrast of the density wave nearly 4 times, therefore enhancing the intensity of the density response spectrum by approximately 15% with half the measured standard error, paving the way for quantitatively determining the speed and attenuation of the second sound. These results demonstrate that the enhanced fringe removal algorithm not only effectively suppresses fringe noise, but also facilitates the identification and detection of important physical phenomena in high-density atomic systems, such as some collective excitations and new quantum phases.

Acta Physica Sinica•Jan 1, 2024•0 citations

Atom interferometry: Principles and applications to fundamental physics

R. Delhuille

The first part of this contribution presents an overview of atom interferometry. In a second part, we discuss in greater details the sensitivity of such experiments to weak perturbations and their application to direct test of the electric neutrality of atoms with extreme precision.

AIP conference proceedings•Jan 1, 2001•0 citations
Energy Absorption Interferometry (EAI) is a technique for measuring the responsivities and complex-valued spatial polarimetric forms of the individual degrees of freedom through which a many-body system can absorb energy. It was originally formulated using the language of quantum correlation functions, making it applicable to different kinds of excitation (electromagnetic, elastic and acoustic fields). EAI has been applied in a variety of theoretical and experimental ways. It is particularly effective at characterising the multimode behaviour of ultra-low-noise far-infrared and optical devices, imaging arrays, and complete instruments, where it can be used to ensure that a system is maximally responsive to those partially coherent fields that carry signal whilst avoiding those that only carry noise. Despite its utility there is no comprehensive overview of electromagnetic EAI. In this paper we describe the theoretical foundations of the method, and present a range of new techniques in areas relating to sampling, phase referencing, mode reconstruction and noise. We present, for the first time, an analysis of how noise propagates through an experiment resulting in errors and artefacts on spectral and modal plots. A noise model is essential, because it determines the signal to noise ratio needed to ensure a given level of experimental fidelity.
Energy Absorption Interferometry (EAI) reconstructs the spatial and polarimetric modes through which a system absorbs energy using power measurements rather than field-resolved detection. This paper develops an electromagnetic formulation of the existing technique and examines how sampling, phase referencing, scanning errors and noise affect modal reconstruction, particularly for far-infrared and optical detectors.
Two phase-locked sources illuminate the system while their relative phase is varied. The resulting fringe gives complex matrix elements of a Hermitian absorption operator; diagonalisation yields modal reception patterns and responsivities. The treatment extends to angular-domain, dual-surface and mixed near-/far-field measurements. Dual-surface data are analysed by singular-value decomposition. A single-mode reference detector removes shared differential phase errors while preserving eigenvalues and referencing recovered modes to its phase front.
Thermal-background, photon-shot and readout noise are related to measurement fluctuations, followed by a Gaussian additive-noise model for the reconstructed response matrix. Numerical examples examine noise-induced spectral artefacts and mixing of nearly degenerate modes. Simulations also illustrate the benefit of matching illumination patterns to the response: 11 harmonic source fields recover the significant modes of a model Gaussian-coherence response. An electromagnetic example reconstructs absorption modes and induced currents for a 4λ4\lambda4λ-wide resistive strip, including a 6λ6\lambda6λ ground plane separated by 0.25λ0.25\lambda0.25λ.
The stated conditions include sufficiently complete illumination, dual-basis reconstruction for nonorthogonal sources, separability for reduced line-scan sampling, and propagation that is unitary on the relevant modal subspace for dual-surface mode preservation. Nonlinear and fully stochastic extensions remain outside the developed treatment.
Optical quantum metrology uses specially-prepared states of light to probe sensitive samples. Choosing a suitable probe state allows one to extract more information per probe photon about an unknown parameter than is possible using any classical technique. In effect, these techniques improve the sensitivity of the measurement whenever the number of probe photons is constrained in some way. This thesis presents experimental and theoretical results on the use of pairs of time-frequency entangled photons in precision measurements. It begins with an overview of necessary background knowledge about quantum optics and quantum information. This is followed by a theoretical discussion on the estimation of a single delay using two-photon interference. We show that constraints on the probe photon's bandwidth complicate the measurement problem, requiring suitable optimization of the two-photon quantum state to avoid losing precision. We then consider the use of two-photon interference for linear spectroscopic measurements. Linear spectroscopy relates the absorption and phase spectrum of a sample to unknown electronic parameters. We describe a proof-of-principle experiment demonstrating that two-photon interferometric spectroscopy can be used for simultaneously measurement of both absorption and phase. This is followed by an information-theoretic discussion of the precision of this technique. For low losses, we show that the method provides phase sensitivity similar to classical interferometry while approaching the optimal absorption precision of any possible measurement. If the absorption and phase values are both related to a single unknown parameter, then our technique provides improved sensitivity to this parameter compared to both classical measurements and other quantum techniques in the presence of realistic levels of loss. We conclude with a discussion of quantum-optical coherence tomography, which is a two-photon interferometric method for determining the material structure of a sample. We present an ongoing experiment which aims to apply the method to tissue-like samples, where the quantum measurement is limited by a poor signal-to-noise ratio. Preliminary results demonstrate that this noise can be largely reduced by suitable frequency-domain filtering. This allows us to precisely determine the position of a scattering center using a few hundred detected photon pairs despite the presence of large amounts of noise. We follow this with a theoretical discussion of signal artifacts which are known to complicate the measured interferogram. We show these artifacts are due to a distinct interferometric effect, which can be distinguished from the signal of interest using the relative time delay between detected photons. We conclude with a brief discussion on possible techniques for artifact removal.
Amplitude interferometry and intensity interferometry are methods for processing the complex amplitude and the intensity, respectively, of an electromagnetic field to estimate the mutual intensity of the field at two spatial locations. Whereas complex amplitude measurements allow for the direct estimation of the mutual-intensity phase, intensity measurements do not. We consider applications for which the estimation of the magnitude or the squared magnitude of the mutual intensity is adequate, and we provide fundamental limits on the estimation accuracy of any unbiased estimator of the squared magnitude of the mutual intensity from coherent (complex amplitude) or incoherent (intensity) measurements. Our analysis is performed for the high-light-level (classical-noise-limit) case and quantifies the advantages of making the more difficult coherent measurements.
This thesis presents work undertaken with cold rubidium atoms interacting with an optical microcavity. The optical microcavity used is unique in its design, being formed between an optical fibre and silicon micromirror. This allows direct optical access to the cavity mode, whilst the use of microfabrication techniques in the design means that elements of the system are inherently scalable. In addition, the parameters of the system are such that a single atom has a substantial impact on the cavity field. In this system, two types of signal arise from the atoms' interaction with the cavity field; a `reflection' signal and a `fluorescence' signal. A theoretical description for these signals is presented, followed by experiments which characterise the signals under a variety of experimental conditions. The thesis then explores two areas: the use of the microcavity signals for atom detection and the investigation of how higher atom numbers and, as a result, a larger cooperative interaction between the atoms and the cavity field, impacts the signals. First, the use of these signals to detect an effective single atom and individual atoms whilst falling and trapped is explored. The effectiveness of detection is parameterised in terms of detection confidence and signal to noise ratio, detection fidelity and dynamic range. In the second part of this thesis, the effect of higher atom numbers on the reflection and fluorescence signals is investigated. A method for increasing the atom number is presented, alongside experiments investigating the impact on the measured signals. This is followed by experiments which explore the dispersive nature of the atom-cavity interaction by measuring the excitation spectrum of the system in reflection and fluorescence. In doing so, it is shown that, for weak coupling, these two signals are manifestly different.
Absorption imaging is the foundation for quantitative measurements in experiments on ultracold atoms. This technique mainly involves capturing images of both the probing light field and the atom absorption light field. In this process, the unavoidable jitter of the probing light introduces imaging noise of fringe patterns into the atomic optical density distribution OD. In conventional fringe removal algorithms, this type of noise can be normalized by constructing an optimal reference image from multiple reference images that have been actually taken, which shares similar fringe patterns to an absorption image (Fig. (a)). Although this method works well in the region without atomic signal, they often overlook the modulation of the noise signal due to atomic absorption effects, leading to persistent residual fringes on the atom clouds. This problem becomes more pronounced with atomic density increasing. Here, we propose an enhanced fringe removal algorithm that takes into account the effects of atomic absorption, and actively modulates the intensity of the noise signal in the reference image constructed by conventional fringe removal algorithms (Fig. (b)), effectively preventing the residual fringes from forming, thus significantly improving the signal-to-noise ratio of the atomic images. When applied to the absorption imaging of homogeneous Fermi gases with high density, as shown in Fig. (d), this new algorithm successfully reduces the relative standard deviation of optical depth characterizing atomic density fluctuations by approximately 37%, which is about 3 times the relative standard deviation by conventional algorithm. Three subgraphs in Fig. (e) show the optical depth distribution at corresponding data points labeled by square boxes in Fig. (d). Furthermore, we also use this technique to quantitatively determine the second sound in the unitary Fermi superfluid of 6Li atoms. Compared with conventional fringe removal methods, our new algorithm increases the correlation function’s contrast of the density wave nearly 4 times, therefore enhancing the intensity of the density response spectrum by approximately 15% with half the measured standard error, paving the way for quantitatively determining the speed and attenuation of the second sound. These results demonstrate that the enhanced fringe removal algorithm not only effectively suppresses fringe noise, but also facilitates the identification and detection of important physical phenomena in high-density atomic systems, such as some collective excitations and new quantum phases.