Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Atoms in microcavities : detection and spectroscopy

Joanna Kenner

Published Mar 1, 2010• 1 citation
Publisher

Abstract

This thesis presents work undertaken with cold rubidium atoms interacting with an optical microcavity. The optical microcavity used is unique in its design, being formed between an optical fibre and silicon micromirror. This allows direct optical access to the cavity mode, whilst the use of microfabrication techniques in the design means that elements of the system are inherently scalable. In addition, the parameters of the system are such that a single atom has a substantial impact on the cavity field. In this system, two types of signal arise from the atoms' interaction with the cavity field; a `reflection' signal and a `fluorescence' signal. A theoretical description for these signals is presented, followed by experiments which characterise the signals under a variety of experimental conditions. The thesis then explores two areas: the use of the microcavity signals for atom detection and the investigation of how higher atom numbers and, as a result, a larger cooperative interaction between the atoms and the cavity field, impacts the signals. First, the use of these signals to detect an effective single atom and individual atoms whilst falling and trapped is explored. The effectiveness of detection is parameterised in terms of detection confidence and signal to noise ratio, detection fidelity and dynamic range. In the second part of this thesis, the effect of higher atom numbers on the reflection and fluorescence signals is investigated. A method for increasing the atom number is presented, alongside experiments investigating the impact on the measured signals. This is followed by experiments which explore the dispersive nature of the atom-cavity interaction by measuring the excitation spectrum of the system in reflection and fluorescence. In doing so, it is shown that, for weak coupling, these two signals are manifestly different.

DOI
10.25560/5867

Related papers

Internal and external dynamics of a strongly-coupled atom-cavity system

Sebastian Reick

A system comprised of a small number of neutral atoms coupled to the mode of a high finesse optical resonator is a model system to study light-matter interaction at the quantum level and to explore fundamental effects like the influence of the measurement process on the atomic state. Promising proposals to generate entangled states in such systems are based on the simultaneous coupling of two atoms to one resonator mode. In chapter 1 of this thesis I shortly summarise the experimental tools to capture, trap, and transport single atoms using a magneto-optical trap and an optical conveyor belt. I discuss theoretical foundations to describe our system and present numerical simulations, the results of which enter the analysis of our experimental data. The average atom-cavity coupling strength is deduced from the measured cavity transmission and compared to a model taking atomic motion into account. The dynamics of the hyperfine spin state of one and two coupled atoms is the focus of chapter 2. I describe a nondestructive cavity-based state detection method, quantify the state detection fidelity, and identify optimum experimental parameters. This method is then used to record random telegraph signals, exhibiting quantum jumps on a timescale of milliseconds. Telegraph signals for two atoms are analysed employing Bayesian statistics, yielding additional information on the evolution of the hyperfine states. A good localisation of the atom is necessary to achieve stable coupling to the cavity mode. In chapter 3, I discuss two different aspects of how the motion of the atom can be controlled. Firstly an intracavity dipole trap is characterised and it is shown that it results in improved confinement of the atom. Secondly I examine the dependence of cavity-cooling forces on our experimental parameters and compare two different cooling regimes.

•Jan 1, 2009•1 citation

Cold Atom Physics: Trapping Methods And Detection Schemes.

Thejesh Bandi

"The work presented in this thesis is concerned with the manipulation of laser- cooled rubidium atoms and the detection of small numbers of cold atoms using very sensitive light detectors. Laser-cooled atoms are atoms that have been slowed to very low velocities, corresponding to temperatures of the order of 100 //K, and they can be trapped in magnetic and/or optical traps. The advantage of using cold atoms for experiments in atomic and quantum physics stems from the fact that these atoms are effectively confined within a region of space and this provides longer interaction and observation times compared to atoms at room temperature. Hence, it is possible to explore and observe a number of effects that would otherwise be extremely challenging. The achievement of laser cooling and trapping of neutral atoms was a major breakthrough in the mid 80’s and has resulted in significant advances being made in modern spectroscopy, the realisation of Bose-Einstein condensation, atomic clocks, and quantum information technologies amongst others. In particular, the work focuses on two theoretical proposals for developing microtraps for cold rubidium atoms involving (i) ultrathin optical fibres and (ii) wavelength sized apertures in thin films. In addition, a number of experimental techniques are explored with emphasis on the detection of small numbers of atoms near ultrathin optical fibres using both avalanche photodiodes and single photon detectors. A study on the interactions between atoms and photons is crucial for a full understanding of quantum mechanical processes at the few atom scale and detection schemes sensitive to very low levels of fluorescence from the laser-cooled atoms are vital for attaining this goal. Finally, an experimental study on the design and fabrication of arrays of silica microdisks, that could be used for facilitating interactions between cold atoms and photons, is presented."

Sword•Jan 1, 2008•0 citations

Atom Detection and Photon Production in a Scalable, Open, Optical Microcavity

Michael Trupke, J. Goldwin, Benoît Darquié +4 more

A microfabricated Fabry-Perot optical resonator has been used for atom detection and photon production with less than 1 atom on average in the cavity mode. Our cavity design combines the intrinsic scalability of microfabrication processes with direct coupling of the cavity field to single-mode optical waveguides or fibers. The presence of the atom is seen through changes in both the intensity and the noise characteristics of probe light reflected from the cavity input mirror. An excitation laser passing transversely through the cavity triggers photon emission into the cavity mode and hence into the single-mode fiber. These are first steps toward building an optical microcavity network on an atom chip for applications in quantum information processing.

arXiv:0710.2116•Physical Review Letters•Aug 8, 2007•111 citations

Experiments in Cavity QED: Exploring the Interaction of Quantized Light with a Single Trapped Atom

Andreea Boca

The experiments discussed in this thesis focus on the interaction of a single trapped atom with the single mode of a high-finesse optical cavity, in the regime of strong coupling. Chapter 1 gives a brief introduction, after which Chapter 2 describes our recent measurements of the transmission spectrum of the atom-cavity system. The spectrum exhibits a clearly resolved vacuum-Rabi splitting, in good quantitative agreement with theoretical predictions. A new Raman scheme for cooling atomic motion along the cavity axis enables a complete spectrum to be recorded for an individual atom trapped within the cavity mode, in contrast to all previous measurements of this type that have required averaging over 10^3-10^5 atoms. Chapter 3 discusses our observations of photon blockade for the transmitted light in the presence of one trapped atom. Excitation of the atom-cavity system by a first photon blocks the transmission of a second one, thereby converting an incident Poissonian stream of photons into a sub-Poissonian, anti-bunched stream, as confirmed by measurements of the photon statistics of the transmitted field. The intensity correlations of the cavity transmission also reveal the energy distribution for oscillatory motion of the trapped atom. Chapter 4 details a set of simple but necessary measurements of relevant experimental parameters such as cavity geometry, linewidth, mirror properties, birefringence, and detection efficiency. The thesis concludes with Appendix A, describing the efficient laser setup we use for our magneto-optical traps.

•May 31, 2005•3 citations

Strong Coupling between Small Atomic Ensembles and an Open Fiber Cavity

G Manuel Fernández, Carmena Jose

In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.

•Apr 12, 2018•3 citations

Fast cavity-enhanced atom detection with low noise and high fidelity

J. Goldwin, Michael Trupke, Joanna Kenner +2 more

Cavity quantum electrodynamics describes the fundamental interactions between light and matter, and how they can be controlled by shaping the local environment. For example, optical microcavities allow high-efficiency detection and manipulation of single atoms. In this regime, fluctuations of atom number are on the order of the mean number, which can lead to signal fluctuations in excess of the noise on the incident probe field. Here we demonstrate, however, that nonlinearities and multi-atom statistics can together serve to suppress the effects of atomic fluctuations when making local density measurements on clouds of cold atoms. We measure atom densities below 1 per cavity mode volume near the photon shot-noise limit. This is in direct contrast to previous experiments where fluctuations in atom number contribute significantly to the noise. Atom detection is shown to be fast and efficient, reaching fidelities in excess of 97% after 10 μs and 99.9% after 30 μs.

arXiv:1009.2916•Nature Communications•Aug 9, 2011•21 citations
This thesis presents work undertaken with cold rubidium atoms interacting with an optical microcavity. The optical microcavity used is unique in its design, being formed between an optical fibre and silicon micromirror. This allows direct optical access to the cavity mode, whilst the use of microfabrication techniques in the design means that elements of the system are inherently scalable. In addition, the parameters of the system are such that a single atom has a substantial impact on the cavity field. In this system, two types of signal arise from the atoms' interaction with the cavity field; a reflection' signal and a fluorescence' signal. A theoretical description for these signals is presented, followed by experiments which characterise the signals under a variety of experimental conditions. The thesis then explores two areas: the use of the microcavity signals for atom detection and the investigation of how higher atom numbers and, as a result, a larger cooperative interaction between the atoms and the cavity field, impacts the signals. First, the use of these signals to detect an effective single atom and individual atoms whilst falling and trapped is explored. The effectiveness of detection is parameterised in terms of detection confidence and signal to noise ratio, detection fidelity and dynamic range. In the second part of this thesis, the effect of higher atom numbers on the reflection and fluorescence signals is investigated. A method for increasing the atom number is presented, alongside experiments investigating the impact on the measured signals. This is followed by experiments which explore the dispersive nature of the atom-cavity interaction by measuring the excitation spectrum of the system in reflection and fluorescence. In doing so, it is shown that, for weak coupling, these two signals are manifestly different.
A system comprised of a small number of neutral atoms coupled to the mode of a high finesse optical resonator is a model system to study light-matter interaction at the quantum level and to explore fundamental effects like the influence of the measurement process on the atomic state. Promising proposals to generate entangled states in such systems are based on the simultaneous coupling of two atoms to one resonator mode. In chapter 1 of this thesis I shortly summarise the experimental tools to capture, trap, and transport single atoms using a magneto-optical trap and an optical conveyor belt. I discuss theoretical foundations to describe our system and present numerical simulations, the results of which enter the analysis of our experimental data. The average atom-cavity coupling strength is deduced from the measured cavity transmission and compared to a model taking atomic motion into account. The dynamics of the hyperfine spin state of one and two coupled atoms is the focus of chapter 2. I describe a nondestructive cavity-based state detection method, quantify the state detection fidelity, and identify optimum experimental parameters. This method is then used to record random telegraph signals, exhibiting quantum jumps on a timescale of milliseconds. Telegraph signals for two atoms are analysed employing Bayesian statistics, yielding additional information on the evolution of the hyperfine states. A good localisation of the atom is necessary to achieve stable coupling to the cavity mode. In chapter 3, I discuss two different aspects of how the motion of the atom can be controlled. Firstly an intracavity dipole trap is characterised and it is shown that it results in improved confinement of the atom. Secondly I examine the dependence of cavity-cooling forces on our experimental parameters and compare two different cooling regimes.
"The work presented in this thesis is concerned with the manipulation of laser- cooled rubidium atoms and the detection of small numbers of cold atoms using very sensitive light detectors. Laser-cooled atoms are atoms that have been slowed to very low velocities, corresponding to temperatures of the order of 100 //K, and they can be trapped in magnetic and/or optical traps. The advantage of using cold atoms for experiments in atomic and quantum physics stems from the fact that these atoms are effectively confined within a region of space and this provides longer interaction and observation times compared to atoms at room temperature. Hence, it is possible to explore and observe a number of effects that would otherwise be extremely challenging. The achievement of laser cooling and trapping of neutral atoms was a major breakthrough in the mid 80’s and has resulted in significant advances being made in modern spectroscopy, the realisation of Bose-Einstein condensation, atomic clocks, and quantum information technologies amongst others. In particular, the work focuses on two theoretical proposals for developing microtraps for cold rubidium atoms involving (i) ultrathin optical fibres and (ii) wavelength sized apertures in thin films. In addition, a number of experimental techniques are explored with emphasis on the detection of small numbers of atoms near ultrathin optical fibres using both avalanche photodiodes and single photon detectors. A study on the interactions between atoms and photons is crucial for a full understanding of quantum mechanical processes at the few atom scale and detection schemes sensitive to very low levels of fluorescence from the laser-cooled atoms are vital for attaining this goal. Finally, an experimental study on the design and fabrication of arrays of silica microdisks, that could be used for facilitating interactions between cold atoms and photons, is presented."
A microfabricated Fabry-Perot optical resonator has been used for atom detection and photon production with less than 1 atom on average in the cavity mode. Our cavity design combines the intrinsic scalability of microfabrication processes with direct coupling of the cavity field to single-mode optical waveguides or fibers. The presence of the atom is seen through changes in both the intensity and the noise characteristics of probe light reflected from the cavity input mirror. An excitation laser passing transversely through the cavity triggers photon emission into the cavity mode and hence into the single-mode fiber. These are first steps toward building an optical microcavity network on an atom chip for applications in quantum information processing.
The experiments discussed in this thesis focus on the interaction of a single trapped atom with the single mode of a high-finesse optical cavity, in the regime of strong coupling. Chapter 1 gives a brief introduction, after which Chapter 2 describes our recent measurements of the transmission spectrum of the atom-cavity system. The spectrum exhibits a clearly resolved vacuum-Rabi splitting, in good quantitative agreement with theoretical predictions. A new Raman scheme for cooling atomic motion along the cavity axis enables a complete spectrum to be recorded for an individual atom trapped within the cavity mode, in contrast to all previous measurements of this type that have required averaging over 10^3-10^5 atoms. Chapter 3 discusses our observations of photon blockade for the transmitted light in the presence of one trapped atom. Excitation of the atom-cavity system by a first photon blocks the transmission of a second one, thereby converting an incident Poissonian stream of photons into a sub-Poissonian, anti-bunched stream, as confirmed by measurements of the photon statistics of the transmitted field. The intensity correlations of the cavity transmission also reveal the energy distribution for oscillatory motion of the trapped atom. Chapter 4 details a set of simple but necessary measurements of relevant experimental parameters such as cavity geometry, linewidth, mirror properties, birefringence, and detection efficiency. The thesis concludes with Appendix A, describing the efficient laser setup we use for our magneto-optical traps.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.
Cavity quantum electrodynamics describes the fundamental interactions between light and matter, and how they can be controlled by shaping the local environment. For example, optical microcavities allow high-efficiency detection and manipulation of single atoms. In this regime, fluctuations of atom number are on the order of the mean number, which can lead to signal fluctuations in excess of the noise on the incident probe field. Here we demonstrate, however, that nonlinearities and multi-atom statistics can together serve to suppress the effects of atomic fluctuations when making local density measurements on clouds of cold atoms. We measure atom densities below 1 per cavity mode volume near the photon shot-noise limit. This is in direct contrast to previous experiments where fluctuations in atom number contribute significantly to the noise. Atom detection is shown to be fast and efficient, reaching fidelities in excess of 97% after 10 μs and 99.9% after 30 μs.