Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.11725

Homogeneous Microwave Delivery for Quantum Sensing with Nitrogen-Vacancy Centers at High Pressures

Timothy A. Elmslie, Luca Basso, Adam Dodson, Jacob Henshaw, Andrew M. Mounce

cond-mat.mtrl-scicond-mat.mes-hallquant-phSubmitted Jan 16, 2026• Announced Jan 20, 2026
arXivHTMLPDF

Abstract

Nitrogen vacancy (NV) centers have been demonstrated as a useful tool in high pressure environments. However, the geometry and small working area of the diamond anvil cells (DACs) used to apply pressure present a challenge to effective delivery of microwave (mw) fields. We designed and characterized a novel slotted design for mw transmission to nitrogen-vacancy centers (NVs) in a diamond anvil cell via zero-field and in-field optically detected magnetic resonance (ODMR) measurements across pressures between 1 and 48 GPa. The mw fields experienced by NVs across the diamond culet was calculated from Rabi frequency and found to be higher and more uniform than those generated by an equivalent simple mw line, which will improve performance for wide-field, high-pressure measurements to probe spatial variations across samples under pressure.

Comments
5 page main text, 7 page supplement, 4 figure main text, 13 figure supplement

Related papers

Magnetic Sensing inside a Diamond Anvil Cell via Nitrogen-Vacancy Center Spins*

Yan‐Xing Shang, Fang Hong, Jianhong Dai +6 more

The diamond anvil cell-based high-pressure technique is a unique tool for creating new states of matter and for understanding the physics underlying some exotic phenomena. In situ sensing of spin and charge properties under high pressure is crucially important but remains technically challenging. While the nitrogen-vacancy (NV) center in diamond is a promising quantum sensor under extreme conditions, its spin dynamics and the quantum control of its spin states under high pressure remain elusive. In this study, we demonstrate coherent control, spin relaxation, and spin dephasing measurements for ensemble NV centers up to 32.8 GPa. With this in situ quantum sensor, we investigate the pressure-induced magnetic phase transition of a micron-size permanent magnet Nd 2 Fe 14B sample in a diamond anvil cell, with a spatial resolution of ∼2 μm, and sensitivity of ∼20 μT/Hz 1/2. This scheme could be generalized to measure other parameters such as temperature, pressure and their gradients under extreme conditions. This will be beneficial for frontier research of condensed matter physics and geophysics.

Chinese Physics Letters•Aug 1, 2019•34 citations

Variable bandwidth, high efficiency microwave resonator for control of spin-qubits in nitrogen-vacancy centers

Anton Savitsky, Jingfu Zhang, Dieter Suter

Nitrogen-Vacancy (NV) centers in diamond are attractive tools for sensing and quantum information. Realization of this potential requires effective tools for controlling the spin degree of freedom by microwave (mw) magnetic fields. In this work, we present a planar microwave resonator optimized for microwave-optical double resonance experiments on single NV centers in diamond. It consists of a piece of wide microstrip line, which is symmetrically connected to two 50 Ω microstrip feed lines. In the center of the resonator, an Ω-shaped loop focuses the current and the mw magnetic field. It generates a relatively homogeneous magnetic field over a volume of 0.07 × 0.1 mm3. It can be operated at 2.9 GHz in both transmission and reflection modes with bandwidths of 1000 and 400 MHz, respectively. The high power-to-magnetic field conversion efficiency allows us to produce π-pulses with a duration of 50 ns with only about 200 and 50 mW microwave power in transmission and reflection, respectively. The transmission mode also offers capability for efficient radio frequency excitation. The resonance frequency can be tuned between 1.3 and 6 GHz by adjusting the length of the resonator. This will be useful for experiments on NV-centers at higher external magnetic fields and on different types of optically active spin centers.

arXiv:2301.03911•Review of Scientific Instruments•Feb 1, 2023•8 citations

Tunable and broadband loop gap resonator for nitrogen vacancy centers in diamond

Erik R. Eisenach

Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.

•Jan 1, 2018•1 citation

Solid-State Quantum Microwave Standard Using Nitrogen-Vacancy Centers in Diamond

Masahiro Yamamoto, Moriyoshi Haruyama, Moto Kinoshita +3 more

Solid-state quantum sensors based on nitrogen-vacancy (NV) centers in diamond offer room-temperature operation, chemical stability, and a wide range of operating environments, and their application to microwave (MW) measurements are anticipated. In this study, we propose a method for quantitative MW field measurements under continuous-wave driving, referred to as the "NV Candle," aimed at realizing a solid-state quantum MW standard. Building on the atomic candle concept developed in atomic vapor systems, this method employs phase modulation of MW and resonance with Rabi oscillations to extract the Rabi frequency in the frequency domain. Experiments using NV centers in diamond demonstrated that the MW magnetic field derived from the NV Candle signals exhibited linearity over a 20 dB dynamic range. This work presents a novel approach to realize a solid-state quantum MW standard with enhanced robustness and practical applicability.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations

Detuning-insensitive wide-field imaging of vector microwave fields with diamond sensors

Xiu-Qi Chen, Rui-Zhi Zhang, Gang-Qin Liu +1 more

Nitrogen vacancy (NV) centers in diamond have precipitated profound advances in microwave detection, manifesting themselves both in spatial resolution and sensitivity. However, typical methods based on Rabi oscillations are subject to detunings due to thermal and magnetic fluctuations and/or gradients, which introduce systematic errors and render the measurements susceptible to environmental perturbations. Here, we propose and demonstrate a novel approach for determining both the magnitude and direction of microwaves, by exploiting the spectral line broadening effect in the optically detected magnetic resonance of NV centers. This method eliminates the requirement of aligning the MW frequency to the spin transitions and is therefore immune to variations and inhomogeneities of the magnetic field and temperature, providing an optimal tool for fast imaging applications. With this method, we achieved wide-field imaging of near field microwaves generated with a microscale $\rmΩ$-pattern antenna with a resolution of 800\,nm. Combining with the vector detection using multi-axis NVs, a full reconstruction of the vector microwave fields is obtained. Besides, our scheme also exhibits excellent linearity over a broad range of MW amplitudes, and the scale is theoretically calculated to be more than four orders. Our results augment the applicability of diamond-based microwave devices in applications under complex scenarios, especially where large dynamic range, fast test speed, and high spatial resolution are demanded.

physics.ins-detCross-listedarXiv:2512.05986•Dec 1, 2025

Sensing the local charge and strain environments surrounding Nitrogen-Vacancy centers in diamond

Thomas Mittiga

Nitrogen-Vacancy (NV) centers in diamond have been established as exceptionally versatile probes for quantum technologies from sensing to simulation.Owing to the versatility of diamond fabrication, NVs can be integrated into probes with nanoscale resolution and superb sensitivity.\nHowever, because the diamond is host to many other types of defects, the local environment of the NV is unique for each NV, which poses challenges for any devices instrumenting NVs.\nThis thesis contributes to the future of NV technologies along two essential directions.\nFirst, we work towards a more complete understanding of the local charge and strain environments of the NV.\nIn addition to permitting the calibration of these effects for NV probes, we suggest potential uses for the local charges and strain that had previously been considered hindrances.\nSecond, we develop new technologies for NV sensing and simulation.\nOur work integrating NVs into diamond anvil cells opens the door to detecting high pressure phenomena using the NVs as all-in-one sensors.\nFinally, our study of the coherence regimes of the local defect environment of the NV is a step towards versatile quantum simulation in dimensions lower than three.

•Jan 1, 2020•0 citations
Nitrogen vacancy (NV) centers have been demonstrated as a useful tool in high pressure environments. However, the geometry and small working area of the diamond anvil cells (DACs) used to apply pressure present a challenge to effective delivery of microwave (mw) fields. We designed and characterized a novel slotted design for mw transmission to nitrogen-vacancy centers (NVs) in a diamond anvil cell via zero-field and in-field optically detected magnetic resonance (ODMR) measurements across pressures between 1 and 48 GPa. The mw fields experienced by NVs across the diamond culet was calculated from Rabi frequency and found to be higher and more uniform than those generated by an equivalent simple mw line, which will improve performance for wide-field, high-pressure measurements to probe spatial variations across samples under pressure.
The diamond anvil cell-based high-pressure technique is a unique tool for creating new states of matter and for understanding the physics underlying some exotic phenomena. In situ sensing of spin and charge properties under high pressure is crucially important but remains technically challenging. While the nitrogen-vacancy (NV) center in diamond is a promising quantum sensor under extreme conditions, its spin dynamics and the quantum control of its spin states under high pressure remain elusive. In this study, we demonstrate coherent control, spin relaxation, and spin dephasing measurements for ensemble NV centers up to 32.8 GPa. With this in situ quantum sensor, we investigate the pressure-induced magnetic phase transition of a micron-size permanent magnet Nd 2 Fe 14B sample in a diamond anvil cell, with a spatial resolution of ∼2 μm, and sensitivity of ∼20 μT/Hz 1/2. This scheme could be generalized to measure other parameters such as temperature, pressure and their gradients under extreme conditions. This will be beneficial for frontier research of condensed matter physics and geophysics.
Nitrogen-Vacancy (NV) centers in diamond are attractive tools for sensing and quantum information. Realization of this potential requires effective tools for controlling the spin degree of freedom by microwave (mw) magnetic fields. In this work, we present a planar microwave resonator optimized for microwave-optical double resonance experiments on single NV centers in diamond. It consists of a piece of wide microstrip line, which is symmetrically connected to two 50 Ω microstrip feed lines. In the center of the resonator, an Ω-shaped loop focuses the current and the mw magnetic field. It generates a relatively homogeneous magnetic field over a volume of 0.07 × 0.1 mm3. It can be operated at 2.9 GHz in both transmission and reflection modes with bandwidths of 1000 and 400 MHz, respectively. The high power-to-magnetic field conversion efficiency allows us to produce π-pulses with a duration of 50 ns with only about 200 and 50 mW microwave power in transmission and reflection, respectively. The transmission mode also offers capability for efficient radio frequency excitation. The resonance frequency can be tuned between 1.3 and 6 GHz by adjusting the length of the resonator. This will be useful for experiments on NV-centers at higher external magnetic fields and on different types of optically active spin centers.
Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.
Solid-state quantum sensors based on nitrogen-vacancy (NV) centers in diamond offer room-temperature operation, chemical stability, and a wide range of operating environments, and their application to microwave (MW) measurements are anticipated. In this study, we propose a method for quantitative MW field measurements under continuous-wave driving, referred to as the "NV Candle," aimed at realizing a solid-state quantum MW standard. Building on the atomic candle concept developed in atomic vapor systems, this method employs phase modulation of MW and resonance with Rabi oscillations to extract the Rabi frequency in the frequency domain. Experiments using NV centers in diamond demonstrated that the MW magnetic field derived from the NV Candle signals exhibited linearity over a 20 dB dynamic range. This work presents a novel approach to realize a solid-state quantum MW standard with enhanced robustness and practical applicability.
Nitrogen vacancy (NV) centers in diamond have precipitated profound advances in microwave detection, manifesting themselves both in spatial resolution and sensitivity. However, typical methods based on Rabi oscillations are subject to detunings due to thermal and magnetic fluctuations and/or gradients, which introduce systematic errors and render the measurements susceptible to environmental perturbations. Here, we propose and demonstrate a novel approach for determining both the magnitude and direction of microwaves, by exploiting the spectral line broadening effect in the optically detected magnetic resonance of NV centers. This method eliminates the requirement of aligning the MW frequency to the spin transitions and is therefore immune to variations and inhomogeneities of the magnetic field and temperature, providing an optimal tool for fast imaging applications. With this method, we achieved wide-field imaging of near field microwaves generated with a microscale Ω\rmΩΩ-pattern antenna with a resolution of 800\,nm. Combining with the vector detection using multi-axis NVs, a full reconstruction of the vector microwave fields is obtained. Besides, our scheme also exhibits excellent linearity over a broad range of MW amplitudes, and the scale is theoretically calculated to be more than four orders. Our results augment the applicability of diamond-based microwave devices in applications under complex scenarios, especially where large dynamic range, fast test speed, and high spatial resolution are demanded.
Nitrogen-Vacancy (NV) centers in diamond have been established as exceptionally versatile probes for quantum technologies from sensing to simulation.Owing to the versatility of diamond fabrication, NVs can be integrated into probes with nanoscale resolution and superb sensitivity.\nHowever, because the diamond is host to many other types of defects, the local environment of the NV is unique for each NV, which poses challenges for any devices instrumenting NVs.\nThis thesis contributes to the future of NV technologies along two essential directions.\nFirst, we work towards a more complete understanding of the local charge and strain environments of the NV.\nIn addition to permitting the calibration of these effects for NV probes, we suggest potential uses for the local charges and strain that had previously been considered hindrances.\nSecond, we develop new technologies for NV sensing and simulation.\nOur work integrating NVs into diamond anvil cells opens the door to detecting high pressure phenomena using the NVs as all-in-one sensors.\nFinally, our study of the coherence regimes of the local defect environment of the NV is a step towards versatile quantum simulation in dimensions lower than three.