Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2301.03911 · Review of Scientific Instruments

Variable bandwidth, high efficiency microwave resonator for control of spin-qubits in nitrogen-vacancy centers

Anton Savitsky, Jingfu Zhang, Dieter Suter

Published Feb 1, 2023• 8 citations
arXivHTMLPDF

Abstract

Nitrogen-Vacancy (NV) centers in diamond are attractive tools for sensing and quantum information. Realization of this potential requires effective tools for controlling the spin degree of freedom by microwave (mw) magnetic fields. In this work, we present a planar microwave resonator optimized for microwave-optical double resonance experiments on single NV centers in diamond. It consists of a piece of wide microstrip line, which is symmetrically connected to two 50 Ω microstrip feed lines. In the center of the resonator, an Ω-shaped loop focuses the current and the mw magnetic field. It generates a relatively homogeneous magnetic field over a volume of 0.07 × 0.1 mm3. It can be operated at 2.9 GHz in both transmission and reflection modes with bandwidths of 1000 and 400 MHz, respectively. The high power-to-magnetic field conversion efficiency allows us to produce π-pulses with a duration of 50 ns with only about 200 and 50 mW microwave power in transmission and reflection, respectively. The transmission mode also offers capability for efficient radio frequency excitation. The resonance frequency can be tuned between 1.3 and 6 GHz by adjusting the length of the resonator. This will be useful for experiments on NV-centers at higher external magnetic fields and on different types of optically active spin centers.

DOI
10.1063/5.0125628

Related papers

Optimized Planar Microwave Antenna for Nitrogen Vacancy Center Based Sensing Applications

Oliver Opaluch, Nimba Oshnik, Richard Nelz +1 more

Individual nitrogen vacancy (NV) color centers in diamond are versatile, spin-based quantum sensors. Coherently controlling the spin of NV centers using microwaves in a typical frequency range between 2.5 and 3.5 GHz is necessary for sensing applications. In this work, we present a stripline-based, planar, Ω-shaped microwave antenna that enables one to reliably manipulate NV spins. We found an optimal antenna design using finite integral simulations. We fabricated our antennas on low-cost, transparent glass substrate. We created highly uniform microwave fields in areas of roughly 400 × 400 μm2 while realizing high Rabi frequencies of up to 10 MHz in an ensemble of NV centers.

arXiv:2108.09122•Nanomaterials•Aug 19, 2021•44 citations

Tunable double split-ring resonator for quantum sensing using nitrogen-vacancy centers in diamond

Yan Yang, Qin Wu, Yangpeng Wang +5 more

For quantum sensing based on nitrogen-vacancies (NV) ensembles, microwave antennas can couple the microwave field to the NV center, which leads it to becoming the core of spin manipulation and can directly affect the sensitivity of quantum sensing. The double split-ring resonator is a widely used microwave device for NV ensembles due to the advantages of high radiation efficiency and uniform magnetic field in millimeter-scale areas. But the bandwidth (30 MHz) is quite narrow which limits the application in quantum sensing with NV ensembles. Here, we experimentally achieve continuous tuning of the resonant frequency of the double split-ring resonator by changing the copper sheet position on the edge of the outer ring. The frequency tuning range can reach 80 MHz, up to 2-3 times the bandwidth, which can cover the transition of the electron spin under different magnetic field conditions. The performance of the tunable antenna in the quantum operation of NV centers is verified by optically detected magnetic resonance and Rabi oscillation. This tunable antenna is promising in the fabrication of integrated and arrayed quantum sensors based on NV ensembles.

Optics Continuum•May 16, 2023•11 citations

A Wideband Balun-Based Microwave Device for Quantum Information Processing With Nitrogen–Vacancy Centers in Diamond

Feifei Ge, Bing Chen, Yangpeng Wang +5 more

We present a wideband balun-based microwave device for quantum manipulation of nitrogen-vacancy centers in diamond. The device employs a balun with multi-section Chebyshev impedance transformer to realize the conversion from the unbalanced feed line to the balanced feed line and ensures impedance matching. A bandwidth of 2.2 GHz with the maximum resonance frequency up to 4.4 GHz has been realized, which is important for multi-qubit quantum control of the nitrogen-vacancy centers. We also carry out optically detected magnetic resonance to observe Rabi oscillations and calibrate the strength of the microwave magnetic field generated by the microwave device. With an input power of 0.5 W, the Rabi frequencies can reach 6.17 MHz and 6.06 MHz for resonant microwave at 1.40 GHz and 4.34 GHz, respectively. Combining with large bandwidth and excellent magnetic field homogeneity, the device can be applied in solid-state quantum information processing.

Journal of Lightwave Technology•Jan 27, 2022•7 citations

Wideband microwave resonator for NV center vector magnetometry

S. V. Bolshedvorskii, E. A. Koreshin, V. V. Soshenko +10 more

The nitrogen-vacancy (NV) color center in diamond has found applications in magnetometry across various geometrical scales. In particular, vector magnetometry using hand-held devices with low power consumption is of interest for mobile and geological applications. However, such a device requires efficient driving of the four different orientations of the NV center, thus placing demands on a broadband microwave resonator that provides a uniform and highly insensitive microwave magnetic field at the resonance frequencies of the NV centers. Here, we propose a unique planar resonator design that enables efficient driving of all four orientations of NV color centers over a 100 MHz range with only 0.5 W of microwave input power and 250 mW of laser power, allowing vector magnetic field measurements. Using the planar resonator to drive NV centers in diamond, a compact vector magnetometer was fabricated and experimentally studied. The sensitivity of the device is about \[{1.2\text{ nT}}/{\sqrt{\text{Hz}}}\;\]. While this is not a record sensitivity for diamond-based magnetometers, this device occupies its own niche as a compact hand-held magnetometer.

quant-pharXiv:2610.13379•Oct 12, 2026

High bandwidth heterodyne sensing with bulk NV diamond

H. A. M. Taylor, J. P. Duff, L. B. Miller +4 more

Developing high performance portable sensors is of significant importance for both terrestrial and satellite communications, with quantum sensors offering potential advantages in sensitivity and bandwidth. The nitrogen vacancy center in diamond is a popular quantum sensing platform for its relative simplicity and wide range of acceptable operating conditions, but suffers a limited instantaneous bandwidth due to the narrow linewidth of the spin resonance. In this work, we first present a magnetic quantum sensing scheme utilizing heterodyne mixing with strong optical and microwave driving, achieving MHz-scale instantaneous bandwidth with a sensitivity of $548 \; \text{pT/}\sqrt{\text{Hz}}$ in an active diamond volume of $ 2.5\times 10^{-4} \; \text{mm}^3$ with $2 \times 10^{11}$ NV centers. We then demonstrate expansion of the sensing bandwidth by employing a strong magnetic gradient and many individually modulated microwave control fields, expanding the single resonance bandwidth to 48 MHz with a peak sensitivity of $8.5 \; \text{nT/}\sqrt{\text{Hz}}$.

quant-pharXiv:2610.39022•Physical Review Applied•Oct 30, 2026•1 citation

Tunable and broadband loop gap resonator for nitrogen vacancy centers in diamond

Erik R. Eisenach

Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.

•Jan 1, 2018•1 citation
Nitrogen-Vacancy (NV) centers in diamond are attractive tools for sensing and quantum information. Realization of this potential requires effective tools for controlling the spin degree of freedom by microwave (mw) magnetic fields. In this work, we present a planar microwave resonator optimized for microwave-optical double resonance experiments on single NV centers in diamond. It consists of a piece of wide microstrip line, which is symmetrically connected to two 50 Ω microstrip feed lines. In the center of the resonator, an Ω-shaped loop focuses the current and the mw magnetic field. It generates a relatively homogeneous magnetic field over a volume of 0.07 × 0.1 mm3. It can be operated at 2.9 GHz in both transmission and reflection modes with bandwidths of 1000 and 400 MHz, respectively. The high power-to-magnetic field conversion efficiency allows us to produce π-pulses with a duration of 50 ns with only about 200 and 50 mW microwave power in transmission and reflection, respectively. The transmission mode also offers capability for efficient radio frequency excitation. The resonance frequency can be tuned between 1.3 and 6 GHz by adjusting the length of the resonator. This will be useful for experiments on NV-centers at higher external magnetic fields and on different types of optically active spin centers.
Individual nitrogen vacancy (NV) color centers in diamond are versatile, spin-based quantum sensors. Coherently controlling the spin of NV centers using microwaves in a typical frequency range between 2.5 and 3.5 GHz is necessary for sensing applications. In this work, we present a stripline-based, planar, Ω-shaped microwave antenna that enables one to reliably manipulate NV spins. We found an optimal antenna design using finite integral simulations. We fabricated our antennas on low-cost, transparent glass substrate. We created highly uniform microwave fields in areas of roughly 400 × 400 μm2 while realizing high Rabi frequencies of up to 10 MHz in an ensemble of NV centers.
For quantum sensing based on nitrogen-vacancies (NV) ensembles, microwave antennas can couple the microwave field to the NV center, which leads it to becoming the core of spin manipulation and can directly affect the sensitivity of quantum sensing. The double split-ring resonator is a widely used microwave device for NV ensembles due to the advantages of high radiation efficiency and uniform magnetic field in millimeter-scale areas. But the bandwidth (30 MHz) is quite narrow which limits the application in quantum sensing with NV ensembles. Here, we experimentally achieve continuous tuning of the resonant frequency of the double split-ring resonator by changing the copper sheet position on the edge of the outer ring. The frequency tuning range can reach 80 MHz, up to 2-3 times the bandwidth, which can cover the transition of the electron spin under different magnetic field conditions. The performance of the tunable antenna in the quantum operation of NV centers is verified by optically detected magnetic resonance and Rabi oscillation. This tunable antenna is promising in the fabrication of integrated and arrayed quantum sensors based on NV ensembles.
We present a wideband balun-based microwave device for quantum manipulation of nitrogen-vacancy centers in diamond. The device employs a balun with multi-section Chebyshev impedance transformer to realize the conversion from the unbalanced feed line to the balanced feed line and ensures impedance matching. A bandwidth of 2.2 GHz with the maximum resonance frequency up to 4.4 GHz has been realized, which is important for multi-qubit quantum control of the nitrogen-vacancy centers. We also carry out optically detected magnetic resonance to observe Rabi oscillations and calibrate the strength of the microwave magnetic field generated by the microwave device. With an input power of 0.5 W, the Rabi frequencies can reach 6.17 MHz and 6.06 MHz for resonant microwave at 1.40 GHz and 4.34 GHz, respectively. Combining with large bandwidth and excellent magnetic field homogeneity, the device can be applied in solid-state quantum information processing.
The nitrogen-vacancy (NV) color center in diamond has found applications in magnetometry across various geometrical scales. In particular, vector magnetometry using hand-held devices with low power consumption is of interest for mobile and geological applications. However, such a device requires efficient driving of the four different orientations of the NV center, thus placing demands on a broadband microwave resonator that provides a uniform and highly insensitive microwave magnetic field at the resonance frequencies of the NV centers. Here, we propose a unique planar resonator design that enables efficient driving of all four orientations of NV color centers over a 100 MHz range with only 0.5 W of microwave input power and 250 mW of laser power, allowing vector magnetic field measurements. Using the planar resonator to drive NV centers in diamond, a compact vector magnetometer was fabricated and experimentally studied. The sensitivity of the device is about 1.2 nT/Hz  {1.2\text{ nT}}/{\sqrt{\text{Hz}}}\;1.2 nT/Hz​. While this is not a record sensitivity for diamond-based magnetometers, this device occupies its own niche as a compact hand-held magnetometer.
Developing high performance portable sensors is of significant importance for both terrestrial and satellite communications, with quantum sensors offering potential advantages in sensitivity and bandwidth. The nitrogen vacancy center in diamond is a popular quantum sensing platform for its relative simplicity and wide range of acceptable operating conditions, but suffers a limited instantaneous bandwidth due to the narrow linewidth of the spin resonance. In this work, we first present a magnetic quantum sensing scheme utilizing heterodyne mixing with strong optical and microwave driving, achieving MHz-scale instantaneous bandwidth with a sensitivity of 548  pT/Hz548 \; \text{pT/}\sqrt{\text{Hz}}548pT/Hz​ in an active diamond volume of $ 2.5\times 10^{-4} \; \text{mm}^3$ with 2×10112 \times 10^{11}2×1011 NV centers. We then demonstrate expansion of the sensing bandwidth by employing a strong magnetic gradient and many individually modulated microwave control fields, expanding the single resonance bandwidth to 48 MHz with a peak sensitivity of 8.5  nT/Hz8.5 \; \text{nT/}\sqrt{\text{Hz}}8.5nT/Hz​.
Nitrogen vacancy centers in diamond have emerged as a solid-state analog to atomic systems with applications ranging from room temperature quantum computing to quantum sensing and metrology. To date, with notably few exceptions, all NV applications rely on coherent manipulation of spin states via resonant microwave driving. In this thesis the loop gap resonator (LGR) is presented as a mechanism for the delivery of resonantly enhanced and uniform microwave fields to large volume samples of nitrogen vacancy (NV) centers in diamond. Specifically, an S-band tunable LGR and its constituent excitation circuitry are designed and fabricated to enable directionally uniform, strong, homogeneous, and broadband microwave (MW) driving of an NV ensemble over an area larger than 32 mm2 . The LGR design, based on the anode block of a cavity magnetron, demonstrates an average field amplitude of 5 gauss at 42 dBm of input power, and achieves a peak-to-peak field uniformity of 89.5% over an area of 32 mm2 and 97% over an area of 11 mm2 . The broad bandwidth of the LGR is capable of addressing all resonances of an NV ensemble for bias magnetic Fields up to 14 gauss. Furthermore, with cavity ring-down-times in the single nanoseconds, the resonator is compatible with the pulsed MW techniques necessary for a wide range of NV-diamond applications.