Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2601.08824 · Quantum

Breaking the Orthogonality Barrier in Quantum LDPC Codes

Kenta Kasai

quant-phcs.ITSubmitted Jan 13, 2026• Announced Jan 14, 2026• 31 citations• Revised Aug 10, 2026 (v4)
v1 · Jan 13, 2026v2 · Jan 14, 2026v3 · Jan 20, 2026v4 · Aug 10, 2026
arXivHTMLPDF

Abstract

Classical low-density parity-check (LDPC) codes are a widely deployed and well-established technology, forming the backbone of modern communication and storage systems. It is well known that, in this classical setting, increasing the girth of the Tanner graph while maintaining regular degree distributions leads simultaneously to good belief-propagation (BP) decoding performance and large minimum distance. In the quantum setting, however, this principle does not directly apply because quantum LDPC codes must satisfy additional orthogonality constraints between their parity-check matrices. When one enforces both orthogonality and regularity in a straightforward manner, the girth is typically reduced and the minimum distance becomes structurally upper bounded. In this work, we overcome this limitation by using permutation matrices with controlled commutativity and by restricting the orthogonality constraints to only the active part of the construction, while preserving regular check-matrix structures. This design circumvents conventional structural distance limitations induced by parent-matrix orthogonality, and enables the construction of quantum LDPC codes with large girth while avoiding latent low-weight logical operators. As a concrete demonstration, we construct a girth-8, (3,12)-regular $[[9216,4612, \leq 48]]$ quantum LDPC code and show that, under BP decoding combined with a low-complexity post-processing algorithm, it achieves a frame error rate as low as $10^{-8}$ on the depolarizing channel with error probability $4 \%$.

Journal reference
Quantum 10, 2205 (2026)
DOI
10.22331/q-2026-09-09-2205
Comments
18 pages, 2 figures. Accepted for publication in Quantum

Related papers

Quantum Error Correction with Girth-16 Non-Binary LDPC Codes via Affine Permutation Construction

Kenta Kasai

We propose a method for constructing quantum error-correcting codes using non-binary low-density parity-check codes whose Tanner graphs have girth 16. While conventional constructions based on circulant permutation matrices are limited to a maximum girth of 12, our approach leverages affine permutation matrices combined with a randomized sequential selection strategy to eliminate short cycles and achieve girth 16. Numerical experiments show that the proposed codes significantly reduce the number of low-weight codewords. Joint belief propagation decoding over depolarizing channels reveals that although a slight degradation appears in the waterfall region, a substantial improvement is achieved in the error floor performance. We also evaluated the minimum distance of the proposed codes and found that they achieve a larger upper bound than conventional constructions.

arXiv:2504.17790•International Symposium on Turbo Codes and Iterative Information Processing•Aug 18, 2025•7 citations

High-Girth Regular Quantum LDPC Codes from Affine-Coset Structures

Koki Okada, Kenta Kasai

We construct a quantum low-density parity-check code family from a length-$512$ Calderbank--Shor--Steane base matrix pair. The base pair is permutation-equivalent to the known SPC(3) product CSS code, and the present affine-coset description gives a direct proof that both Tanner graphs are $(3,8)$-regular with girth $8$. The base code has parameters $[[512,174,8]]$. We then apply circulant permutation matrix (CPM) lifts. The main decoding experiment uses the CPM-lifted code with lift factor $P=32$, which has parameters $[[16384,4142,18\le d\le32]]$, under the code-capacity depolarizing model. Complete enumeration excludes nontrivial logical representatives of weight at most $16$ on both sides, giving $d_X,d_Z\ge18$. Explicit weight-$32$ non-stabilizer logical representatives give the upper bounds $d_X,d_Z\le32$. A belief-propagation decoder with post-processing achieved frame error rate about $10^{-8}$ at $p=0.085$; an independently observed logical residual of weight $40$ is consistent with the sharper structural bound.

quant-pharXiv:2604.20838•Apr 23, 2026•7 citations

Low-Density Parity-Check Codes of High Girth from Permutation Polynomials

Tasawwar Hussain, Anthony Gómez-Fonseca, Tefjol Pllaha

Quasi-cyclic low-density parity-check (QC-LDPC) codes are widely used in modern communication standards due to their simple structure and efficient encoder and decoder implementations. However, the commutativity of the circulant permutation matrices used in their construction significantly limits their girth and minimum distance, affecting iterative decoding performance. In this paper, we investigate protograph-based codes constructed using permutation polynomials of higher degree, focusing on a closed family of non-commuting binomial permutation polynomials that enables these constructions to exceed both of these girth and minimum distance upper bounds while maintaining a simple representation. Simulation results demonstrate improved decoding performance compared to constructions based on affine permutation polynomials, which include QC-LDPC codes.

arXiv:2610.03341•Oct 2, 2026•0 citations

A Class of Quantum LDPC Codes Constructed From Finite Geometries

Salah A. Aly

Low-density parity check (LDPC) codes are a significant class of classical codes with many applications. Several good LDPC codes have been constructed using random, algebraic, and finite geometries approaches, with containing cycles of length at least six in their Tanner graphs. However, it is impossible to design a self-orthogonal parity check matrix of an LDPC code without introducing cycles of length four. In this paper, a new class of quantum LDPC codes based on lines and points of finite geometries is constructed. The parity check matrices of these codes are adapted to be self- orthogonal with containing only one cycle of length four in each pair of two rows. Also, the column and row weights, and bounds on the minimum distance of these codes are given. As a consequence, these codes can be encoded using shift-register encoding algorithms and can be decoded using iterative decoding algorithms over various quantum depolarizing channels.

arXiv:0712.4115•Globecom•Jan 1, 2008•54 citations

High-Girth Regular Quantum LDPC Codes from Square-Base Hypergraph Products via CPM Lifts

Koki Okada, Kenta Kasai

We study square-base Calderbank--Shor--Steane (CSS) hypergraph-product codes as a finite-length class for regular high-girth quantum low-density parity-check (LDPC) design. For base matrices of small column weight, we give checkable conditions for regularity, rank deficiency, and short-cycle exclusion, and we present explicit column-weight-three and column-weight-four examples with Tanner girth 6 and 8. We also analyze circulant permutation matrix (CPM) lifts of this class. Using the standard voltage-sum criterion, we identify orthogonality-forced Tanner 8-cycles and show that CPM lifting cannot raise the Tanner girth beyond 8 when these cycles are present. As a representative finite-length instance, a randomized CPM lift of the girth-8 base construction gives a $[[28800,62,18\le d\le192]]$ girth-8 $(3,6)$-regular CSS-LDPC code. Complete enumeration excludes nontrivial logical supports of weight at most $16$ on both sides, giving $d_X,d_Z\ge18$; explicit weight-$192$ representatives give $d_X,d_Z\le192$. Under degeneracy-aware belief-propagation decoding with optional ordered-statistics-decoding-lite post-processing, this code produced zero decoding failures in $2.993\times 10^8$ independent trials at depolarizing probability $p=0.1402$; the Wilson 95\% upper confidence bound is $1.28\times 10^{-8}$.

quant-pharXiv:2604.27817•May 1, 2026•5 citations

The Design of Structured Low-Density Parity-Check Codes With Large Girth

Jing Long

This paper,based on algebra and graph,proposes a method for constructing structured low-density parity-check(LDPC) codes.In this method,the authors design a connected graph with three kinds of special path to ensure that the Tanner graph of the parity check matrix mapped from the connected graph is without short cycles.The construction method results in two classes of(3,k)-regular quasi-cyclic LDPC codes with girth 8 and 12 respectively.Furthermore,by extending this construction method,two classes of LDPC codes with column weight 2,whose girths are respectively 16 and 24,can be obtained.The simulation studies show that these codes can achieve better performance than randomly constructed regular LDPC codes over AWGN channels with iterative decoding.At the BER of 10-5,the new proposed(3,6)-regular(4356,2205) QC-LDPC code performs 1.48dB from the Shannon limit.Moreover,it outperforms the random regular LDPC code of comparable parameters by 0.1dB.For the new proposed structured LDPC codes with column weight 2,they can achieve about 2dB coding gains with respect to the random regular LDPC codes with similar block lengths and code rates.

Chinese Journal of Computers•Jan 1, 2007•1 citation
Classical low-density parity-check (LDPC) codes are a widely deployed and well-established technology, forming the backbone of modern communication and storage systems. It is well known that, in this classical setting, increasing the girth of the Tanner graph while maintaining regular degree distributions leads simultaneously to good belief-propagation (BP) decoding performance and large minimum distance. In the quantum setting, however, this principle does not directly apply because quantum LDPC codes must satisfy additional orthogonality constraints between their parity-check matrices. When one enforces both orthogonality and regularity in a straightforward manner, the girth is typically reduced and the minimum distance becomes structurally upper bounded. In this work, we overcome this limitation by using permutation matrices with controlled commutativity and by restricting the orthogonality constraints to only the active part of the construction, while preserving regular check-matrix structures. This design circumvents conventional structural distance limitations induced by parent-matrix orthogonality, and enables the construction of quantum LDPC codes with large girth while avoiding latent low-weight logical operators. As a concrete demonstration, we construct a girth-8, (3,12)-regular [[9216,4612,≤48]][[9216,4612, \leq 48]][[9216,4612,≤48]] quantum LDPC code and show that, under BP decoding combined with a low-complexity post-processing algorithm, it achieves a frame error rate as low as 10−810^{-8}10−8 on the depolarizing channel with error probability 4%4 \%4%.
We propose a method for constructing quantum error-correcting codes using non-binary low-density parity-check codes whose Tanner graphs have girth 16. While conventional constructions based on circulant permutation matrices are limited to a maximum girth of 12, our approach leverages affine permutation matrices combined with a randomized sequential selection strategy to eliminate short cycles and achieve girth 16. Numerical experiments show that the proposed codes significantly reduce the number of low-weight codewords. Joint belief propagation decoding over depolarizing channels reveals that although a slight degradation appears in the waterfall region, a substantial improvement is achieved in the error floor performance. We also evaluated the minimum distance of the proposed codes and found that they achieve a larger upper bound than conventional constructions.
We construct a quantum low-density parity-check code family from a length-512512512 Calderbank--Shor--Steane base matrix pair. The base pair is permutation-equivalent to the known SPC(3) product CSS code, and the present affine-coset description gives a direct proof that both Tanner graphs are (3,8)(3,8)(3,8)-regular with girth 888. The base code has parameters [[512,174,8]][[512,174,8]][[512,174,8]]. We then apply circulant permutation matrix (CPM) lifts. The main decoding experiment uses the CPM-lifted code with lift factor P=32P=32P=32, which has parameters [[16384,4142,18≤d≤32]][[16384,4142,18\le d\le32]][[16384,4142,18≤d≤32]], under the code-capacity depolarizing model. Complete enumeration excludes nontrivial logical representatives of weight at most 161616 on both sides, giving dX,dZ≥18d_X,d_Z\ge18dX​,dZ​≥18. Explicit weight-323232 non-stabilizer logical representatives give the upper bounds dX,dZ≤32d_X,d_Z\le32dX​,dZ​≤32. A belief-propagation decoder with post-processing achieved frame error rate about 10−810^{-8}10−8 at p=0.085p=0.085p=0.085; an independently observed logical residual of weight 404040 is consistent with the sharper structural bound.
Quasi-cyclic low-density parity-check (QC-LDPC) codes are widely used in modern communication standards due to their simple structure and efficient encoder and decoder implementations. However, the commutativity of the circulant permutation matrices used in their construction significantly limits their girth and minimum distance, affecting iterative decoding performance. In this paper, we investigate protograph-based codes constructed using permutation polynomials of higher degree, focusing on a closed family of non-commuting binomial permutation polynomials that enables these constructions to exceed both of these girth and minimum distance upper bounds while maintaining a simple representation. Simulation results demonstrate improved decoding performance compared to constructions based on affine permutation polynomials, which include QC-LDPC codes.
Low-density parity check (LDPC) codes are a significant class of classical codes with many applications. Several good LDPC codes have been constructed using random, algebraic, and finite geometries approaches, with containing cycles of length at least six in their Tanner graphs. However, it is impossible to design a self-orthogonal parity check matrix of an LDPC code without introducing cycles of length four. In this paper, a new class of quantum LDPC codes based on lines and points of finite geometries is constructed. The parity check matrices of these codes are adapted to be self- orthogonal with containing only one cycle of length four in each pair of two rows. Also, the column and row weights, and bounds on the minimum distance of these codes are given. As a consequence, these codes can be encoded using shift-register encoding algorithms and can be decoded using iterative decoding algorithms over various quantum depolarizing channels.
We study square-base Calderbank--Shor--Steane (CSS) hypergraph-product codes as a finite-length class for regular high-girth quantum low-density parity-check (LDPC) design. For base matrices of small column weight, we give checkable conditions for regularity, rank deficiency, and short-cycle exclusion, and we present explicit column-weight-three and column-weight-four examples with Tanner girth 6 and 8. We also analyze circulant permutation matrix (CPM) lifts of this class. Using the standard voltage-sum criterion, we identify orthogonality-forced Tanner 8-cycles and show that CPM lifting cannot raise the Tanner girth beyond 8 when these cycles are present. As a representative finite-length instance, a randomized CPM lift of the girth-8 base construction gives a [[28800,62,18≤d≤192]][[28800,62,18\le d\le192]][[28800,62,18≤d≤192]] girth-8 (3,6)(3,6)(3,6)-regular CSS-LDPC code. Complete enumeration excludes nontrivial logical supports of weight at most 161616 on both sides, giving dX,dZ≥18d_X,d_Z\ge18dX​,dZ​≥18; explicit weight-192192192 representatives give dX,dZ≤192d_X,d_Z\le192dX​,dZ​≤192. Under degeneracy-aware belief-propagation decoding with optional ordered-statistics-decoding-lite post-processing, this code produced zero decoding failures in 2.993×1082.993\times 10^82.993×108 independent trials at depolarizing probability p=0.1402p=0.1402p=0.1402; the Wilson 95\% upper confidence bound is 1.28×10−81.28\times 10^{-8}1.28×10−8.
This paper,based on algebra and graph,proposes a method for constructing structured low-density parity-check(LDPC) codes.In this method,the authors design a connected graph with three kinds of special path to ensure that the Tanner graph of the parity check matrix mapped from the connected graph is without short cycles.The construction method results in two classes of(3,k)-regular quasi-cyclic LDPC codes with girth 8 and 12 respectively.Furthermore,by extending this construction method,two classes of LDPC codes with column weight 2,whose girths are respectively 16 and 24,can be obtained.The simulation studies show that these codes can achieve better performance than randomly constructed regular LDPC codes over AWGN channels with iterative decoding.At the BER of 10-5,the new proposed(3,6)-regular(4356,2205) QC-LDPC code performs 1.48dB from the Shannon limit.Moreover,it outperforms the random regular LDPC code of comparable parameters by 0.1dB.For the new proposed structured LDPC codes with column weight 2,they can achieve about 2dB coding gains with respect to the random regular LDPC codes with similar block lengths and code rates.