Germanium quantum dot hole spin qubits are compatible with fully electrical control and are progressing toward multi-qubit operations. However, their coherence is limited by charge noise and driving field induced frequency shifts, and the resulting ensemble $1/f$ dephasing. Here we theoretically demonstrate that a bichromatic driving scheme cancels the second order frequency shift from the control field without sacrificing the electric dipole spin resonance (EDSR) rate, and without additional gate design or microwave engineering. Based on this property, we further demonstrate that bichromatic control creates a wide operating window that reduces sensitivity to quasi-static charge noise and thus enhances single qubit gate fidelity. This method provides a low-power route to a stabler frequency operation in germanium hole spin qubits and is readily transferable to other semiconductor spin qubit platforms.
Germanium quantum dot hole spin qubits are compatible with fully electrical control and are progressing toward multi-qubit operations. However, their coherence is limited by charge noise and driving field induced frequency shifts, and the resulting ensemble 1/f dephasing. Here we theoretically demonstrate that a bichromatic driving scheme cancels the second order frequency shift from the control field without sacrificing the electric dipole spin resonance (EDSR) rate, and without additional gate design or microwave engineering. Based on this property, we further demonstrate that bichromatic control creates a wide operating window that reduces sensitivity to quasi-static charge noise and thus enhances single qubit gate fidelity. This method provides a low-power route to a stabler frequency operation in germanium hole spin qubits and is readily transferable to other semiconductor spin qubit platforms.
Hole spin qubits in semiconductor quantum dots (QDs) enable high-fidelity all-electric control, but conventional electric dipole spin resonance (EDSR) can require substantial rf drive power at the low magnetic fields that are favorable for qubit coherence and readout. In planar Ge hole spin qubits, this can reach -27 dBm at the device, posing challenges for scalable architectures due to heating and crosstalk. Here, we demonstrate a flopping-mode (FM) qubit in Ge, where a single spin is delocalized in a double QD, combining first-order protection against charge noise with exceptionally efficient electric driving. By mapping out coherence sweet-spots as a function of magnetic field orientation we achieve T2∗=1.4μs, T2Hahn=11.5μs, T2φ,CPMG32=130μs, and T1=226μs, and a single-qubit gate fidelity of up to 99.76% for a gate time tXπ=88 ns. Importantly, these results are obtained at a nearly in-plane magnetic field of 5 mT using only -52 dBm drive power at the device. We further find that qubit relaxation in this regime is consistent with a two-photon Orbach process, providing a route for further optimization. Our results demonstrate that FM-EDSR supports ultra-low-power, high-fidelity single-qubit operations, improvements that could benefit scalable hole-spin-based architectures and hybrid spin-photon interfaces.
Electrically driven spin resonance (EDSR) is an established tool for controlling semiconductor spin qubits. Here, we theoretically study a frequency-mixing variant of EDSR, where two driving tones with different drive frequencies are applied, and the resonance condition connects the spin Larmor frequency with the sum of the two drive frequencies. Focusing on flopping-mode operation of a single electron in a double quantum dot with spin-orbit interaction, we calculate the parameter dependence of the Rabi frequency and the Bloch-Siegert shift. A shared-control spin qubit architecture could benefit from this bichromatic EDSR scheme, as it enables simultaneous single-qubit gates.
Abstract In semiconductor hole spin qubits, low magnetic field ( B ) operation extends the coherence time ( T2∗ T 2 * ) but proportionally reduces the gate speed. In contrast, singlet-triplet (ST) qubits are primarily controlled by the exchange interaction ( J ) and can thus maintain high gate speeds even at low B . However, a large J introduces a significant charge component to the qubit, rendering ST qubits more vulnerable to charge noise when driven. Here, we demonstrate a highly coherent ST hole spin qubit in germanium, operating at both low B and low J . By modulating J , we achieve resonant driving of the ST qubit, obtaining an average gate fidelity of 99.68% and a coherence time of T2∗=1.9μs T 2 * = 1.9 μ s . Moreover, by applying the resonant drive continuously, we realize a dressed ST qubit with a tenfold increase in coherence time ( T2ρ∗=20.3μs T 2 ρ * = 20.3 μ s ). Frequency modulation of the driving signal enables universal control, with an average gate fidelity of 99.63%. Our results demonstrate the potential for extending coherence times while preserving high-fidelity control of germanium-based ST qubits, paving the way for more efficient operations in semiconductor-based quantum processors.
Spin qubits in semiconductor quantum dots constitute one of the leading platforms for quantum information processing, combining long coherence times, high-fidelity gate operations, and compatibility with semiconductor industry technologies. In particular, holes confined in planar Ge/SiGe heterostructures have recently emerged as promising qubit candidates owing to their low effective mass, high mobility, low percolation density, absence of valley states, and strong spin-orbit interaction, which enables fast all-electrical spin control. At the same time, spin-orbit interaction also gives rise to a highly anisotropic and electrically tunable gyromagnetic response. Understanding and controlling this response is therefore essential for high-fidelity single- and multi-qubit operations. The realization of scalable quantum processors also requires efficient qubit readout and long-range connectivity. Circuit quantum electrodynamics (cQED), based on the coupling between artificial atoms and microwave photons confined in superconducting resonators, provides a natural framework to address these challenges. However, the implementation of hybrid semiconductor-superconductor devices in planar Ge has so far been hindered by large microwave losses originating from the heterostructure. In this thesis, we demonstrate, for the first time in planar Ge, strong coupling between a hole charge qubit in a double quantum dot and a high-impedance microwave resonator, reaching a cooperativity of C â 100. In addition, we leverage the frequency tunability of the resonator to perform detailed spectroscopy of a multi-level energy spectrum of low-lying states arising from strong Coulomb-correlation effects. To further improve the quality of the hole-photon interface, we investigate the source of microwave losses in different Ge/SiGe heterostructures, identifying defects at the lattice-mismatched Si/Ge interface as the dominant source of resonator losses in reverse-graded heterostructures. To mitigate this limitation, a deep tapered-etching approach is introduced, enabling the fabrication of superconducting resonators directly on etched heterostructures. This method yields internal quality factors exceeding Qint > 10 000 for high-impedance Josephson junction array resonators and Qint > 100 000 for 50 â Nb resonators. Finally, this thesis explores the spin properties of multi-hole quantum dots beyond the conventional single-orbital picture. By reconstructing and electrically tuning the g tensors of holes confined in different orbital states, we show that confinement can substantially modify both their magnitude and orientation. These results open new opportunities for engineering qubit properties through orbital occupation. Furthermore, highly coherent singlet-triplet oscillations are demonstrated in the seven-hole regime, yielding a quality factor of approximately 330 at in-plane magnetic fields as low as 2.5 mT. Together, these results establish a foundation for high-fidelity hole-spin-qubit operation based on g-tensor engineering and for the integration of planar Ge quantum dots with superconducting quantum circuits.
Hole spins in silicon quantum dots are a promising platform for quantum computing due to their strong intrinsic spin-orbit coupling (SOC), which enables fast, all-electrical control. However, this coupling also increases their susceptibility to charge noise, thereby limiting coherence times. Moreover, holes in silicon are also affected by hyperfine interactions with residual nuclear spins in the silicon substrate, introducing a non-negligible source of low-frequency noise. Here, we implement a phase-modulated concatenated continuous driving (CCD) technique for hole spin qubits to suppress low-frequency noise through microwave phase modulation. This approach stabilizes Rabi oscillations and extends the oscillation decay time compared to the conventional method. Furthermore, by defining a qubit in the CCD frame, we achieve coherent control while simultaneously protecting the qubit from noise, confirming coherence protection during gate operations. These results demonstrate a viable route toward noise-robust hole spin qubits.
Hole spin qubits hosted in Germanium quantum dots are promising candidates for scalable quantum computing. The strong spin-orbit interaction can enable fast and all-electrical quantum control. Furthermore, the platform can implement universal quantum control using only baseband signals, which may mitigate the impact of crosstalk and microwave-induced heating. At the same time, spin-orbit interaction gives rise to an anisotropic exchange interaction, whose potential for implementing two-qubit gates has remained largely unexplored. However, the current performance of operating a hole-based quantum computer is mostly limited by dephasing due to low-frequency charge noise. In this work, we propose a novel two-qubit gate protocol for Germanium hole spin qubits operated in the gapless regime. This gate protocol exploits the anisotropic exchange interaction between neighboring spins and utilizes a composite pulse scheme implemented solely through electrical baseband signals. Using this approach, we predict high-fidelity two-qubit controlled-Z operations that can suppress exchange-energy fluctuations, offering a pathway toward fault-tolerant semiconductor quantum processors.