Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.21807 · Science Advances

Low-SWaP magneto-optical trap enabled by planar photonic and magnetic components

Hao Gao, Yumeng Zhu, Zhilong Yu, Yuhui Hu, Zhelin Lin, Shiming Wei, Feng Zhao, Amit Kumar Agrawal, Zeyang Liu, Xiaochi Liu, Cheng Zhang

Published Aug 19, 2026• 0 citations
arXivHTMLPDF

Abstract

Compact, lightweight, and energy-efficient cold-atom systems are foundational for the development of deployable quantum technologies, yet their realization remains largely constrained due to reliance on bulky optical and magnetic components. Here, we demonstrate a record-low-SWaP (size, weight, and power) magneto-optical trap architecture seamlessly integrating planar photonic and magnetic components into a monolithic, scalable, and manufacturable platform. This is achieved by developing a multifunctional metasurface that converts a linearly-polarized Gaussian beam into a circularly-polarized flat-top beam (FTB), replacing conventional lens-waveplate assemblies. In parallel, a planar magnetic coil chip substitutes bulky anti-Helmholtz coils and generates the required quadrupole magnetic field with substantially reduced power consumption. Using D 2 line cooling of 87 Rb atoms, the fully planar system achieves nearly an order-of-magnitude improvement in trapped-atom number while operating at a fraction of the SWaP of traditional implementations. This planar integration strategy provides an energy-efficient and scalable pathway toward robust, deployable cold-atom platforms.

DOI
10.1126/sciadv.aeg0219

Related papers

A compact six-beam 3D magneto-optical trap based on multifunctional metasurface chips

Chen Qing, Huijie Sun, Yize Liu +5 more

Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.

physics.opticsCross-listedarXiv:2610.19504•Oct 15, 2026•0 citations

Magneto-optical trapping using planar optics

William McGehee, Wenqi Zhu, Daniel S. Barker +7 more

Abstract Laser-cooled atoms are a key technology for many calibration-free measurement platforms—including clocks, gyroscopes, and gravimeters—and are a promising system for quantum networking and quantum computing. The optics and vacuum hardware required to prepare these gases are often bulky and not amenable to large-volume manufacturing, limiting the practical realization of devices benefiting from the properties of cold atoms. Planar, lithographically produced optics including photonic integrated circuits, optical metasurfaces (MSs), and gratings offer a pathway to develop chip-scale, manufacturable devices utilizing cold atoms. As a demonstration of this technology, we have realized laser cooling of atomic Rb in a grating-type magneto-optical trap (MOT) using planar optics for beam launching, beam shaping, and polarization control. Efficient use of available light is accomplished using MS-enabled beam shaping, and the performance of the planar optics MOT is competitive with Gaussian-beam illuminated grating MOTs.

New Journal of Physics•Jan 1, 2021•82 citations

Planar-Integrated Magneto-Optical Trap

Liang Chen, Chang-Jiang Huang, Xin‐Biao Xu +12 more

The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to ${10}^{6}$ cold ${}^{87}\mathrm{Rb}$ atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately $6\phantom{\rule{0.2em}{0ex}}\mathrm{mm}$ above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.

arXiv:2107.07367•Physical Review Applied•Mar 10, 2022•66 citations

Compact Cold-Atom Platform Based on Optical Grating and Planar Coil Chips

Chang-Jiang Huang, Lei Xu, Liang Chen +4 more

Abstract We present a compact cold atom platform where an optical grating chip and planar coil chip are placed inside a compact vacuum chamber to create a magneto-optical trap. This approach significantly reduces the system volume to about 20 × 20 × 20 cm3 compared to conventional vacuum systems and offers greater flexibility in accessing the trapped atoms. We demonstrate the trapping of 3 × 105 cold rubidium atoms at a temperature of 100 μK in a vacuum pressure below 10−7 mbar. The simplified optical geometry, low power consumption, and high degree of integration make this a promising platform for portable and versatile cold-atom devices in quantum sensing, timing, and information processing.

Chinese Physics Letters•May 6, 2025•2 citations

Efficient Beam Flattening for Planar-Integrated Magneto-Optical Traps

Chang-Jiang Huang, Hongchen Liu, Liang Chen +4 more

Abstract The planar-integrated magneto-optical trap (PIMOT) offers a promising platform for miniaturizing cold atom systems, but its performance and laser-power efficiency are limited by the typically Gaussian profile of the input laser beam. In this work, we present a simplified and cost-effective beam shaping solution to transform the Gaussian input into a flat-top intensity distribution using a compact system of four spherical lenses. The reshaped light field could potentially enhances PIMOT performance by improving the uniformity of the optical radiation pressure and increasing the trap distance from the chip surface. With this approach, we demonstrate a substantial reduction in the optical power required to trap 2.5 × 10 5 87 Rb atoms, down to 30% compared to a standard Gaussian beam input. Our results open the door to more efficient and flexible PIMOT systems for quantum sensing, metrology, and atom-based quantum technology.

Chinese Physics Letters•Feb 16, 2025•5 citations

Diffraction-Engineered Metasurfaces in Magneto-Optical Trapping toward Compact Cold Atom Systems

Thu Hac Huong Le, Sota Kagami, Ryohei Takei +4 more

Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.

ACS Photonics•Jun 9, 2026•0 citations
Compact, lightweight, and energy-efficient cold-atom systems are foundational for the development of deployable quantum technologies, yet their realization remains largely constrained due to reliance on bulky optical and magnetic components. Here, we demonstrate a record-low-SWaP (size, weight, and power) magneto-optical trap architecture seamlessly integrating planar photonic and magnetic components into a monolithic, scalable, and manufacturable platform. This is achieved by developing a multifunctional metasurface that converts a linearly-polarized Gaussian beam into a circularly-polarized flat-top beam (FTB), replacing conventional lens-waveplate assemblies. In parallel, a planar magnetic coil chip substitutes bulky anti-Helmholtz coils and generates the required quadrupole magnetic field with substantially reduced power consumption. Using D 2 line cooling of 87 Rb atoms, the fully planar system achieves nearly an order-of-magnitude improvement in trapped-atom number while operating at a fraction of the SWaP of traditional implementations. This planar integration strategy provides an energy-efficient and scalable pathway toward robust, deployable cold-atom platforms.
Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.
Abstract Laser-cooled atoms are a key technology for many calibration-free measurement platforms—including clocks, gyroscopes, and gravimeters—and are a promising system for quantum networking and quantum computing. The optics and vacuum hardware required to prepare these gases are often bulky and not amenable to large-volume manufacturing, limiting the practical realization of devices benefiting from the properties of cold atoms. Planar, lithographically produced optics including photonic integrated circuits, optical metasurfaces (MSs), and gratings offer a pathway to develop chip-scale, manufacturable devices utilizing cold atoms. As a demonstration of this technology, we have realized laser cooling of atomic Rb in a grating-type magneto-optical trap (MOT) using planar optics for beam launching, beam shaping, and polarization control. Efficient use of available light is accomplished using MS-enabled beam shaping, and the performance of the planar optics MOT is competitive with Gaussian-beam illuminated grating MOTs.
The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to 106{10}^{6}106 cold 87Rb{}^{87}\mathrm{Rb}87Rb atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately 6mm6\phantom{\rule{0.2em}{0ex}}\mathrm{mm}6mm above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.
Abstract We present a compact cold atom platform where an optical grating chip and planar coil chip are placed inside a compact vacuum chamber to create a magneto-optical trap. This approach significantly reduces the system volume to about 20 × 20 × 20 cm3 compared to conventional vacuum systems and offers greater flexibility in accessing the trapped atoms. We demonstrate the trapping of 3 × 105 cold rubidium atoms at a temperature of 100 μK in a vacuum pressure below 10−7 mbar. The simplified optical geometry, low power consumption, and high degree of integration make this a promising platform for portable and versatile cold-atom devices in quantum sensing, timing, and information processing.
Abstract The planar-integrated magneto-optical trap (PIMOT) offers a promising platform for miniaturizing cold atom systems, but its performance and laser-power efficiency are limited by the typically Gaussian profile of the input laser beam. In this work, we present a simplified and cost-effective beam shaping solution to transform the Gaussian input into a flat-top intensity distribution using a compact system of four spherical lenses. The reshaped light field could potentially enhances PIMOT performance by improving the uniformity of the optical radiation pressure and increasing the trap distance from the chip surface. With this approach, we demonstrate a substantial reduction in the optical power required to trap 2.5 × 10 5 87 Rb atoms, down to 30% compared to a standard Gaussian beam input. Our results open the door to more efficient and flexible PIMOT systems for quantum sensing, metrology, and atom-based quantum technology.
Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.