Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.05413 · Physical Review Letters

Microwave electrometry with quantum-limited resolutions in a Rydberg atom array

Yao-Wen Zhang, De-Sheng Xiang, Ren Liao, Hao-Xiang Liu, Biao Xu, Peng Zhou, Yijia Zhou, Kuan Zhang, Lin Li

physics.atom-phquant-phSubmitted Dec 5, 2025• Announced Dec 8, 2025• 4 citations
arXivHTMLPDF

Abstract

Microwave (MW) field sensing is foundational to modern technology, yet its evolution, reliant on classical antennas, is constrained by fundamental physical limits on field, temporal, and spatial resolutions. Here, we demonstrate an MW electrometry that simultaneously surpasses these constraints by using individual Rydberg atoms in an optical tweezer array as coherent sensors. This approach achieves a field sensitivity within 13% of the standard quantum limit, a response time that exceeds the Chu limit by more than 11 orders of magnitude, and in-situ near-field mapping with λ/3000 spatial resolution. This work establishes Rydberg-atom arrays as a powerful platform that unites quantum-limited sensitivity, nanosecond-scale response time, and sub-micrometer resolution, opening new avenues in quantum metrology and precision electromagnetic field imaging.

DOI
10.1103/v5nm-xwp5
Comments
9 pages, 5 figures

Related papers

Control and Entanglement of Individual Rydberg Atoms near a Nanoscale Device

Paloma Ocola, Ivana Dimitrova, Brandon Grinkemeyer +5 more

Coherent control of Rydberg atoms near dielectric surfaces is a major challenge due to the large sensitivity of Rydberg states to electric fields. We demonstrate coherent single-atom operations and two-qubit entanglement as close as 100 μm from a nanophotonic device. Using the individual atom control enabled by optical tweezers to study the spatial and temporal properties of the electric field from the surface, we employ dynamical decoupling techniques to characterize and cancel the electric-field noise with submicrosecond temporal resolution. We further use entanglement-assisted sensing to accurately map magnitude and direction of electric-field gradients on a micrometer scale. Our observations open a path for integration of Rydberg arrays with micro- and nanoscale devices for applications in quantum networking and quantum information science.

arXiv:2210.12879•Physical Review Letters•Mar 14, 2024•36 citations

Microwave Electrometry with Multi-Photon Coherence in Rydberg Atoms

Yin Zheng, Qianzhu Li, Xiaoyun Song +4 more

A scheme for the measurement of a microwave (MW) electric field is proposed via multi-photon coherence in Rydberg atoms. It is based on the three-photon electromagnetically induced absorption (TPEIA) spectrum. In this process, the multi-photon produces a narrow absorption peak, which has a larger magnitude than the electromagnetically induced transparency (EIT) peak under the same conditions. The TPEIA peak is sensitive to MW fields, and can be used to measure MW electric field strength. We found that the magnitude of TPEIA peaks shows a linear relationship with the MW field strength. The simulation results show that the minimum detectable strength of the MW fields is about 1/10 of that based on an common EIT effect, and the probe sensitivity could be improved by about four times. Furthermore, the MW sensing based on three-photon coherence seems to be robust against the changes in the control field and shows a broad tunability, and the scheme may be useful for designing novel MW sensing devices.

arXiv:2302.07424•Sensors•Aug 19, 2023•3 citations

Microwave electric field sensing with Rydberg atoms

Daniel T. Stack, Paul D. Kunz, David H. Meyer +1 more

Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 19, 2016•3 citations

Quantum metrology for high frequency electric fields

Bruno Eckmann, Tilman Zibold, Johannes Paul Hoffmann +1 more

Quantum systems obeying well-defined laws of physics are very attractive metrological sensors. In principle, they are intrinsically calibrated and allow direct traceability to the SI system. Several fundamental and derived units are nowadays already based on the properties of quantum systems. Neutral atoms are e.g. used for the realization of the second. Leveraging the advantageous properties of such systems to other derived units and establishing traceability still represents a significant challenge, as real-life macroscopic scales must be linked with the microscopic quantum world. In this work, we investigate the use of a vapor of neutral atoms as a highly sensitive probe for electric fields in the microwave domain. By optically exciting the atoms to high-energy states—known as Rydberg states—the atoms become extremely sensitive to electric fields due to their large electric dipole moment. Through optical readout of the atomic state, this enhanced sensitivity can be exploited to turn the atoms into precise sensors for electric fields. In contrast to classical methods of measuring electric fields using metallic probes or antennas, a dilute atomic vapor has the distinct advantage of exerting only minimal influence on the fields being measured. In this study, we aim to leverage these benefits in an experiment designed to measure microwave electric field distributions above a coplanar waveguide structure with high precision and spatial resolution. In order to translate the high accuracy of the atomic sensors to accurate measurements of electrical parameters of the coplanar structure like power, voltage standing wave ratio or S-parameters, we plan to integrate the coplanar waveguide structure into a large atomic vapor cell where it is directly surrounded by the atomic gas. In this case the fields are only minimally disturbed by the vapor cell itself and allow for simple models to translate field measurements into electrical measurements. The methods we are developing in this project are not only aiming to provide traceable measurements for high frequency electrometry but also have the potential to be extended to higher frequency in the terahertz regime or to high resolution imaging of electric field distributions.

•Jan 1, 2025•0 citations

Subwavelength microwave electric-field imaging using Rydberg atoms inside atomic vapor cells

H. Q. Fan, S. Kumar, Renate Daschner +2 more

We have recently shown [Nat. Phys.8, 819 (2012)] that Alkali atoms contained in a vapor cell can serve as a highly accurate standard for microwave (MW) electric field strength as well as polarization. Here we show for the first time that Rydberg atom electromagnetically induced transparency can be used to image MW electric fields with unprecedented precision. The spatial resolution of the method is far into the subwavelength regime ∼λ/650 or 66 μm at 6.9 GHz. The electric field resolutions are similar to those we have already demonstrated ∼50 μV cm(-1). Our experimental results agree with finite element calculations of test electric-field patterns.

arXiv:1403.3596•Optics Letters•May 13, 2014•170 citations

Subwavelength micromachined vapor-cell-based Rydberg quantum antennas

Avital Giat, Kfir Levi, Ori Nefesh +1 more

Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.

arXiv:2504.09559•Quantum Science and Technology•May 28, 2026•4 citations
Microwave (MW) field sensing is foundational to modern technology, yet its evolution, reliant on classical antennas, is constrained by fundamental physical limits on field, temporal, and spatial resolutions. Here, we demonstrate an MW electrometry that simultaneously surpasses these constraints by using individual Rydberg atoms in an optical tweezer array as coherent sensors. This approach achieves a field sensitivity within 13% of the standard quantum limit, a response time that exceeds the Chu limit by more than 11 orders of magnitude, and in-situ near-field mapping with λ/3000 spatial resolution. This work establishes Rydberg-atom arrays as a powerful platform that unites quantum-limited sensitivity, nanosecond-scale response time, and sub-micrometer resolution, opening new avenues in quantum metrology and precision electromagnetic field imaging.
Coherent control of Rydberg atoms near dielectric surfaces is a major challenge due to the large sensitivity of Rydberg states to electric fields. We demonstrate coherent single-atom operations and two-qubit entanglement as close as 100 μm from a nanophotonic device. Using the individual atom control enabled by optical tweezers to study the spatial and temporal properties of the electric field from the surface, we employ dynamical decoupling techniques to characterize and cancel the electric-field noise with submicrosecond temporal resolution. We further use entanglement-assisted sensing to accurately map magnitude and direction of electric-field gradients on a micrometer scale. Our observations open a path for integration of Rydberg arrays with micro- and nanoscale devices for applications in quantum networking and quantum information science.
A scheme for the measurement of a microwave (MW) electric field is proposed via multi-photon coherence in Rydberg atoms. It is based on the three-photon electromagnetically induced absorption (TPEIA) spectrum. In this process, the multi-photon produces a narrow absorption peak, which has a larger magnitude than the electromagnetically induced transparency (EIT) peak under the same conditions. The TPEIA peak is sensitive to MW fields, and can be used to measure MW electric field strength. We found that the magnitude of TPEIA peaks shows a linear relationship with the MW field strength. The simulation results show that the minimum detectable strength of the MW fields is about 1/10 of that based on an common EIT effect, and the probe sensitivity could be improved by about four times. Furthermore, the MW sensing based on three-photon coherence seems to be robust against the changes in the control field and shows a broad tunability, and the scheme may be useful for designing novel MW sensing devices.
Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.
Quantum systems obeying well-defined laws of physics are very attractive metrological sensors. In principle, they are intrinsically calibrated and allow direct traceability to the SI system. Several fundamental and derived units are nowadays already based on the properties of quantum systems. Neutral atoms are e.g. used for the realization of the second. Leveraging the advantageous properties of such systems to other derived units and establishing traceability still represents a significant challenge, as real-life macroscopic scales must be linked with the microscopic quantum world. In this work, we investigate the use of a vapor of neutral atoms as a highly sensitive probe for electric fields in the microwave domain. By optically exciting the atoms to high-energy states—known as Rydberg states—the atoms become extremely sensitive to electric fields due to their large electric dipole moment. Through optical readout of the atomic state, this enhanced sensitivity can be exploited to turn the atoms into precise sensors for electric fields. In contrast to classical methods of measuring electric fields using metallic probes or antennas, a dilute atomic vapor has the distinct advantage of exerting only minimal influence on the fields being measured. In this study, we aim to leverage these benefits in an experiment designed to measure microwave electric field distributions above a coplanar waveguide structure with high precision and spatial resolution. In order to translate the high accuracy of the atomic sensors to accurate measurements of electrical parameters of the coplanar structure like power, voltage standing wave ratio or S-parameters, we plan to integrate the coplanar waveguide structure into a large atomic vapor cell where it is directly surrounded by the atomic gas. In this case the fields are only minimally disturbed by the vapor cell itself and allow for simple models to translate field measurements into electrical measurements. The methods we are developing in this project are not only aiming to provide traceable measurements for high frequency electrometry but also have the potential to be extended to higher frequency in the terahertz regime or to high resolution imaging of electric field distributions.
We have recently shown [Nat. Phys.8, 819 (2012)] that Alkali atoms contained in a vapor cell can serve as a highly accurate standard for microwave (MW) electric field strength as well as polarization. Here we show for the first time that Rydberg atom electromagnetically induced transparency can be used to image MW electric fields with unprecedented precision. The spatial resolution of the method is far into the subwavelength regime ∼λ/650 or 66 μm at 6.9 GHz. The electric field resolutions are similar to those we have already demonstrated ∼50 μV cm(-1). Our experimental results agree with finite element calculations of test electric-field patterns.
Abstract Micromachined vapor cells have revolutionized chip-scale quantum sensors, including magnetometers and atomic clocks. In parallel, Rydberg-atom quantum sensing has emerged as a powerful platform for broadband, non-invasive and ultra-sensitive electrometry, enabling compact atom-based antenna elements for electromagnetic reception, often referred to as quantum antennas. Yet, to date, Rydberg sensing has largely been limited to glass-blown, cm-scale vapor cells. Here, we perform Rydberg spectroscopy and electrometry using a wafer-scale-fabricated Pyrex–Si–Pyrex cell with millimeter-scale dimensions. The Rydberg spectroscopic line is characterized with respect to critical parameters such as temperature, the frequency and amplitude of the applied radio frequency (RF) field, light intensity, and the spatial position of the interrogating beam. Our study reveals lineshapes directly influenced by a complex landscape of electrostatic fields with values up to approximately 0.6 V cm − 1 . By controlling key parameters, we were able to reduce the effect of these internal electric fields, and demonstrate the detection of RF fields assessed using the Autler–Townes splitting with a minimum detectable field of 20 μ V cm − 1 . Our results highlight the potential of micromachined vapor cells for subwavelength electromagnetic field measurements, with applications in communications, near-field RF imaging, and chip-scale quantum technologies.