The accurate treatment of electron correlation in extended molecular systems remains computationally challenging using classical electronic structure methods. Hybrid quantum-classical algorithms offer a potential route to overcome these limitations; however, their practical deployment on existing quantum computers requires strategies that both reduce problem size and mitigate hardware noise. In this work, we investigate ground-state energy calculations of ligand-like molecules using Sample-based Quantum Diagonalization (SQD) within the Density Matrix Embedding Theory (DMET) framework, focusing on low-symmetry systems with diverse bonding motifs that exhibit subsystem-dependent variations in fragment-environment entanglement. These entanglement-based variations directly influence bath orbital construction, impurity sizes, and the structure of the embedded Hamiltonians, posing nontrivial challenges for both embedding and quantum sampling. By combining DMET fragmentation with SQD-based construction of reduced configuration spaces through quantum sampling and iterative configuration recovery, we perform quantum simulations on IBM's Eagle R3 (IBM Sherbrooke) and IBM's Heron R3 (IBM Boston) superconducting quantum hardware thereby, showing that the entanglement structure across embedding subsystems plays a central role in determining the efficiency and accuracy of the simulations. Despite these complexities, we show that the DMET-SQD framework yields ground-state energies in strong agreement with DMET-FCI benchmarks, achieving chemical accuracy (1 kcal/mol) across all systems studied. These results demonstrate that SQD-based quantum simulations can be robustly extended to low-symmetry, chemically realistic, industry relevant molecules, and highlight the importance of entanglement-aware embedding strategies for scalable quantum electronic structure calculations.
The accurate treatment of electron correlation in extended molecular systems remains computationally challenging using classical electronic structure methods. Hybrid quantum-classical algorithms offer a potential route to overcome these limitations; however, their practical deployment on existing quantum computers requires strategies that both reduce problem size and mitigate hardware noise. In this work, we investigate ground-state energy calculations of ligand-like molecules using Sample-based Quantum Diagonalization (SQD) within the Density Matrix Embedding Theory (DMET) framework, focusing on low-symmetry systems with diverse bonding motifs that exhibit subsystem-dependent variations in fragment-environment entanglement. These entanglement-based variations directly influence bath orbital construction, impurity sizes, and the structure of the embedded Hamiltonians, posing nontrivial challenges for both embedding and quantum sampling. By combining DMET fragmentation with SQD-based construction of reduced configuration spaces through quantum sampling and iterative configuration recovery, we perform quantum simulations on IBM's Eagle R3 (IBM Sherbrooke) and IBM's Heron R3 (IBM Boston) superconducting quantum hardware thereby, showing that the entanglement structure across embedding subsystems plays a central role in determining the efficiency and accuracy of the simulations. Despite these complexities, we show that the DMET-SQD framework yields ground-state energies in strong agreement with DMET-FCI benchmarks, achieving chemical accuracy (1 kcal/mol) across all systems studied. These results demonstrate that SQD-based quantum simulations can be robustly extended to low-symmetry, chemically realistic, industry relevant molecules, and highlight the importance of entanglement-aware embedding strategies for scalable quantum electronic structure calculations.
We present a large-scale experimental study of quantum-computing-based molecular simulation carried out on IQM's Sirius 24-qubit superconducting processor, utilizing up to 16 operational qubits. The work employs Sample-based Quantum Diagonalization (SQD) together with the Local Unitary Cluster Jastrow (LUCJ) ansatz to estimate ground-state energies for a set of benchmark molecules, including H2, LiH, BeH2, H2O, and NH3. In addition, we introduce a Linear-CNOT variant of the Unitary Coupled-Cluster Singles and Doubles (LCNot-UCCSD) ansatz within the SQD workflow, trading higher circuit depth for reduced classical preprocessing. A comparison between these ansätze is provided, clarifying their respective strengths, limitations, and suitability for near-term quantum hardware. We further explore potential energy landscapes through 1D scans for H2 and HeH+ using both STO-3G and 6-31G basis sets, and for LiH and BeH2 in STO-3G. Extending beyond this, we demonstrate the experimental construction of a full 2D potential energy surface for the water molecule on quantum hardware, mapped over a 32 × 32 grid in bond length and bond angle. To move beyond small benchmark systems, we combine SQD(LUCJ) with Density Matrix Embedding Theory (DMET) to compute active-space energies for a set of ligand-like molecules, as well as the pharmacologically relevant amantadine system. Across all studies, the majority of quantum-computed energies agree with reference FCI results, as well as with DMET-CASCI energies for embedded systems, to within chemical accuracy for the chosen basis sets. These results demonstrate the reliability of sample-based diagonalization approaches and underscore the potential of hybrid embedding strategies for extending quantum simulations to increasingly complex molecular systems, while also highlighting their practicality on current IQM quantum hardware.
Computing ground-state properties of molecules is a promising application for quantum computers operating in concert with classical high-performance computing resources. Quantum embedding methods are a family of algorithms particularly suited to these computational platforms: they combine high-level calculations on active regions of a molecule with low-level calculations on the surrounding environment, thereby avoiding expensive high-level full-molecule calculations and allowing the distribution of computational cost across multiple and heterogeneous computing units. Here, we present the first density matrix embedding theory (DMET) simulations performed in combination with a sample-based quantum diagonalization (SQD) method. We employ the DMET-SQD formalism to compute the ground-state energy of a ring of 18 hydrogen atoms and the relative energies of the chair, half-chair, twist-boat, and boat conformers of cyclohexane. The full-molecule 41- and 89-qubit simulations are decomposed into 27- and 32-qubit active-region simulations, which we carry out on the ibm_cleveland device, obtaining results in agreement with reference classical methods. Our DMET-SQD calculations mark tangible progress in the size of active regions that can be accurately tackled by near-term quantum computers and are an early demonstration of the potential for quantum-centric simulations to accurately treat the electronic structure of large molecules, with the ultimate goal of tackling systems such as peptides and proteins.
Sample-based quantum diagonalization (SQD), an extension of quantum selected configuration interaction (QSCI), is a promising hybrid quantum-classical paradigm for molecular ground-state energies. By replacing variational optimization with quantum sampling, QSCI avoids barren plateaus and directly reconstructs correlated wavefunctions. However, existing configuration recovery mainly enforces symmetry constraints without targeting the most physically relevant configurations, often yielding oversized subspaces and costly classical diagonalization. We introduce QSCI-RBM, a compact subspace generation protocol based on Restricted Boltzmann Machines (RBMs), and integrate it within Density Matrix Embedding Theory (DMET). The RBM learns the distribution of dominant determinants from hardware samples, generating high-probability configurations. Sampling was performed on IBM Heron R1 (\texttt{ibm\_torino}) for CH5NO, R2 (\texttt{ibm\_fez}) for C2H4, and R3 (\texttt{ibm\_boston}) for the larger H2O benchmark and the protein-ligand system. After validating on these benchmarks of increasing active-space size, we simulate the inhibitor Carmofur bound to the SARS-CoV-2 main protease (M\textsuperscript{pro}), fragmented into ten DMET impurities. Both DMET-QSCI-RBM and a DMET-SQD baseline reach chemical-potential self-consistency within four μ-iterations. At the converged chemical potential, DMET-QSCI-RBM lies within 0.05mHa of DMET-FCI while accessing on average only 0.22% of the symmetry-preserving configuration space, versus 0.55mHa at 33.0% for DMET-SQD, leading to a $\sim$153-fold subspace reduction. RBM-assisted expansion thus yields far more compact hardware-derived determinant spaces at equal or better accuracy, reducing classical overhead for scalable quantum embedding of biological systems on real hardware.
Determining the exponentially scaled ground state wavefunction and the associated molecular properties remains one of the central challenges in quantum chemistry. Hybrid quantum-classical algorithms implemented on quantum computers offer a promising route toward addressing this problem. However, despite several successful demonstrations on small molecular systems, accurate simulations of large and chemically realistic molecules remain difficult due to the limited capability of noisy intermediate scale quantum (NISQ) hardware. To bypass the limitations of NISQ devices, while simultaneously retaining the accuracy of the ground state energy estimations, we propose a dynamic ansatz construction strategy based on operator commutativity and energy driven screening within density matrix embedding theory (DMET) framework. The partitioning of the full system allows us to dynamically construct the ansatz over individual embedded subsystems, allowing each embedding problem be solved individually to a desired accuracy. The embedding Hamiltonian is updated in a self-consistent manner with dynamically formulated wavefunction, and their coupled optimization leads to accurate and efficient description of the overall system. To assess the performance of this approach, we apply it to several molecular systems and chemical processes with up to 144 qubits. These simulations require at most 20 qubits at a time and demonstrate improved accuracy and significantly reduced quantum gate requirements compared with conventional ansatze. We further investigate the impact of various fragmentation strategies and demonstrate the adaptability of our approach at each step of the DMET self-consistency cycle that leads to significantly improved accuracy for strongly correlated system.
Modelling and simulating non-covalent interactions is challenging, as they are inherently weak, dynamic, and system-specific. Common predictive methods often require trading the accuracy for reducing the otherwise cumbersome computational cost. To date, the most accurate approaches, achieving chemical accuracy, rely on quantum mechanical descriptions of non-covalent interactions, which limits their scalability. Whether quantum computing could overcome these limitations is still unclear, as such methods need to be redesigned for quantum hardware. Here, we take the first step in this direction by presenting quantum-centric simulations of non-covalent interactions using a supramolecular approach for binding energy calculations. We use a sample-based quantum diagonalization (SQD) approach to simulate the potential energy surfaces (PES) of the water and methane dimers, featuring hydrogen bond and dispersion interactions, respectively. We benchmark our quantum simulations (27- and 36-qubit circuits) against classical methods, registering deviations within 1.000 kcal/mol from the leading ones. Finally, we test the limits of the quantum methods for capturing dispersion interactions with an experiment on 54 qubits. Beyond reaching state-of-the-art accuracy, our work lays out a framework for electronic structure calculations of non-covalent interactions on quantum hardware. The authors present sample-based quantum diagonalization (SQD) simulations of non-covalent interactions that match the accuracy of state-of-the-art classical methods. These results mark a key step towards quantum advantage, though further advances are needed to fully realize this potential.
Quantum and hybrid quantum-classical algorithms have the potential to improve the accuracy and scale of quantum chemistry and impact a broad range of applications such as drug discovery and catalysis. In particular, subspace methods such as sample-based quantum diagonalization (SQD) can already tackle classically challenging systems. However, practical algorithms that go beyond the computation of electronic ground and excited states are still scarce. Here, we introduce the variable-geometry sample-based quantum diagonalization (VGSQD) algorithm, which extends SQD to variable molecular geometries by reusing quantum samples from a reference geometry at displaced ones, thus significantly reducing quantum computational cost. Using circuits of up to 124 qubits on ibm-quebec, an IBM Heron r2 quantum processor, we determine the equilibrium geometry and energy of the weakly bound, strongly correlated beryllium dimer, as well as the water molecule. Finally, we extend VGSQD to chemical reactions and compute the minimum energy path and energy barrier of a hydrogen exchange reaction. The results are comparable with state-of-the-art classical methods such as CCSD(T) and DMRG. This work broadens the scope of quantum algorithms for chemistry, from energies to geometry optimization and reaction pathways, both essential for practical applications.