Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.20741

Closed-Loop Phase-Coherence Compensation for Superconducting Qubits Integrated Computational and Hardware Validation of the Aurora Method

Futoshi Hamanoue

quant-phSubmitted Nov 25, 2025• Announced Nov 26, 2025• 1 citation• Revised Feb 9, 2026 (v2)
v1 · Nov 25, 2025v2 · Feb 9, 2026
arXivHTMLPDF

Abstract

We present an emulator-based and hardware feasibility study of Aurora-DD, a phase-coherence compensation method that integrates a sign-based feedback update of a global phase offset (Delta phi) with a fixed-depth XY8 dynamical decoupling (DD) scaffold. The feedback optimization is performed offline on a calibrated emulator and the resulting Delta phi* is deployed as pre-calibrated phase compensation on hardware. This represents an "offline closed-loop, online open-loop" feasibility demonstration. Using an Aer-based emulator calibrated with ibm_fez device parameters, Aurora-DD achieves substantial reductions in mean-squared error of the measured expectation value <Z>, yielding 68-97% improvement across phase settings phi = 0.05, 0.10, 0.15, 0.20 over n=30 randomized trials. These large-n emulator results provide statistically stable evidence that the combined effect of XY8 and Delta phi* suppresses both dephasing and systematic phase bias. On real superconducting hardware (ibm_fez), we perform a small-sample (n=3) multi-phase validation campaign. Aurora-DD yields point estimates corresponding to approximately 99.2-99.6% reduction in absolute error relative to a no-DD baseline across all tested phase points. These hardware numbers are reported transparently as feasibility evidence under tight queue and credit constraints. In contrast, the auxiliary Aurora+ZNE branch exhibits instability: shallow two-point ZNE occasionally amplifies calibration inconsistencies and produces large error outliers. We therefore relegate ZNE analysis to the Appendix and position Aurora-DD (without ZNE) as the primary contribution. Overall, the combined results support pre-calibrated Aurora-DD as a practical, stable, and hardware-compatible phase-coherence compensator for NISQ devices in single-qubit settings.

Comments
12 pages, 3 figures Version 2. Clarified scope and limitations of Aurora-DD. Added explicit discussion of non-advantage regimes and stability-oriented positioning following editorial feedback

Related papers

Closed-Loop Phi-Based Intervention During Quantum Circuit Execution on IBM Quantum Hardware

Shawn Barnicle

We investigate whether a training-free thermodynamic stability metric Φ = I × ρ - α × S, computed from IBM Quantum calibration or telemetry data, can drive closed-loop intervention decisions during execution-associated monitoring windows on real hardware. Across 10 paid circuit tests on three IBM backends (ibm_fez, ibm_marrakesh, ibm_torino), together with simulated and telemetry-based harness validation, we evaluate a closed-loop controller that monitors Φ during an execution-associated window and supports five intervention actions: CONTINUE, CONTINUE-DEGRADED, CLASSICAL-FALLBACK, CHECKPOINT-MIGRATE, and ABORT-RESTART. In a same-circuit controlled comparison on ibm_fez, swapping LOW-Φ qubits (Φ = 0.097, 0.030) for HIGH-Φ qubits (Φ = 0.9988, 0.9984) reduced error from 18.36% to 2.73% on an identical Deutsch-Jozsa circuit, an 85.1% relative error reduction. Under matched conditions, composite Φ selection outperformed raw T2 selection by 7.79 percentage points on ibm_fez (68.7% relative reduction) and by 6.37 percentage points aggregate across three backends. Mid-circuit dynamic branching on IBM hardware achieved 98.78% per-shot conditional consistency between probe outcome and branch marker, with an estimated 101,220 logical gates avoided on the ABORT path. A Wilson confidence interval non-overlap rule triggered ABORT-RESTART on 1 of 3 backends in the tested setting. Classical checkpoint representation at a segmentation boundary enabled suffix migration from LOW-Φ to HIGH-Φ qubits with 82.15% final fidelity, without storing an unknown quantum state. Honest counterexamples are preserved: in a three-policy cost comparison a seeded random pair outperformed the Φ-guided pair on ibm_fez, and on ibm_marrakesh raw T2 selection outperformed Φ selection under matched compiled circuit conditions. These results support a closed-loop intervention framework in which Φ can operate as a control variable during execution-associated monitoring rather than only as a pre-execution selection score. The methods described in this paper are the subject of U.S. Provisional Patent Application No. 63/973,723 (filed February 2, 2026). No license to implement or commercialize the described methods is granted by this publication. All rights reserved.

•May 9, 2026•0 citations

Spectator Phase Shift Scaling with Mid-Circuit Measurement Count and Its Mitigation via Virtual-Z Compensation on a Superconducting Quantum Processor - A Minimal Ramsey Diagnostic on IBM Quantum ibm_marrakesh (T = 40 μs) -

Toru Ishibashi

Dynamic circuits with mid-circuit measurement (MCM) and classical feed-forward are essential building blocks for quantum error correction and adaptive quantum protocols. However, in superconducting quantum processors the readout process can induce coherent crosstalk on non-measured (spectator) qubits through the readout resonator, residual photons, and other hardware pathways, leading to deterministic phase kicks (effective Z rotations) that accumulate with the number of MCM events. In this work we present a minimal, reproducible two-qubit Ramsey diagnostic to quantify the spectator-induced phase shift as a function of the number of inserted mid-circuit measurements M, and we demonstrate that a simple virtual-Z (frame) compensation proportional to M can mitigate the resulting phase error on real hardware. In a high-SNR dataset archived on Zenodo (T = 40 μs, 4096 shots per circuit), the effective phase difference Δθeff(M) = θMEAS(M) - θDELAY(M) shifts monotonically in the negative direction as M increases, reaching Δθeff (M=8) = -1.944 ± 0.033 rad. While the contrast r decreases mildly with M, it remains relatively high (r ≈ 0.84 at M = 8), consistent with the effect appearing predominantly as a coherent phase rotation. To mitigate the error, we insert a virtual-Z rotation on the target qubit of the form Rz (comp × M) in the MEAS condition and scan the compensation coefficient comp (rad per measurement). In a MAP dataset (ibm_marrakesh, shots = 512, repeats = 1, M ∈ {0,1,2,4,8}, comp ∈ {-0.02,-0.01,0,+0.01,+0.02}), the RMS of the baseline-referenced phase error DθCT(M) for M>0 is reduced from 0.1393 rad (baseline) to 0.0601 rad at comp = -0.01, demonstrating effective error reduction with a single-parameter circuit-level correction. Finally, using a pay-as-you-go execution environment we run a low-cost “calibration probe” (M = {0,8}, three comp points, 32 circuits total) and obtain compopt ≈ +0.0088 rad/measurement from a three-point linear fit. This supports a practical two-stage workflow in which a short probe estimates the session-dependent compensation coefficient, followed by same-session production runs with the calibrated virtual-Z correction.

•Jan 15, 2026•0 citations

Spectator Phase Shift Scaling with Mid Circuit Measurement Count and Its Mitigation via Virtual Z Compensation on a Superconducting Quantum Processor A Minimal Ramsey Diagnostic on IBM Quantum ibm_marrakesh (T = 40 μs)

Toru Ishibashi

Abstract Dynamic circuits with mid-circuit measurement (MCM) and classical feed-forward are essential building blocks for quantum error correction and adaptive quantum protocols. However, in superconducting quantum processors the readout process can induce coherent crosstalk on non-measured (spectator) qubits through the readout resonator, residual photons, and other hardware pathways, leading to deterministic phase kicks (effective Z rotations) that accumulate with the number of MCM events. In this work we present a minimal, reproducible two-qubit Ramsey diagnostic to quantify the spectator-induced phase shift as a function of the number of inserted mid-circuit measurements M, and we demonstrate that a simple virtual-Z (frame) compensation proportional to M can mitigate the resulting phase error on real hardware. In a high-SNR dataset archived on Zenodo (T = 40 μs, 4096 shots per circuit), the effective phase difference Δθeff(M) = θMEAS(M) - θDELAY(M) shifts monotonically in the negative direction as M increases, reaching Δθeff (M=8) = -1.944 ± 0.033 rad. While the contrast r decreases mildly with M, it remains relatively high (r ≈ 0.84 at M = 8), consistent with the effect appearing predominantly as a coherent phase rotation. To mitigate the error, we insert a virtual-Z rotation on the target qubit of the form Rz (comp × M) in the MEAS condition and scan the compensation coefficient comp (rad per measurement). In a MAP dataset (ibm_marrakesh, shots = 512, repeats = 1, M ∈ {0,1,2,4,8}, comp ∈ {-0.02,-0.01,0,+0.01,+0.02}), the RMS of the baseline-referenced phase error Δθeff(M) for M>0 is minimized at comp = -0.01, decreasing from 0.1393 rad (baseline) to 0.0601 rad. Finally, we implement a low-cost calibration probe (M = {0,8}) scanning five compensation settings comp ∈ {-0.02,-0.01,0,+0.01,+0.02} (1024 shots per circuit, repeats = 2) and estimate a session-dependent coefficient compopt ≈ -0.013 rad/measurement from a linear fit of Δθeff(M=8) versus comp. A same-session production sweep using comp = -0.01453 rad/measurement (close to compopt) shows a reduced residual phase error, supporting a practical probe → production workflow for dynamic-circuit execution. All analysis scripts and summary data are made publicly available to support independent reproduction of the reported phase metrics and figures.

•Feb 15, 2026•0 citations

Experimental Validation of Staggered Dynamical Decoupling on a 156-Qubit Superconducting Quantum Processor: 663,552 IBM Heron r2 Shots, Matched Controls, and Governed Execution

Devin Phillip Davis

OSIRIS Physical QPU Validation Campaign Deliverable (v1.0) This deposition contains the complete empirical evidence, raw shot count dictionaries, instruction-set architecture (ISA) compiled circuits, physical schedule audits, analysis scripts, publication figures, and LaTeX manuscript for the OSIRIS Staggered Dynamical Decoupling (STAG_XY8) Validation Campaign executed on ibm_marrakesh, a 156-qubit IBM Quantum Heron r2 processor. Across four independent hardware acquisition jobs comprising 648 ISA circuits, 663,552 physical shots, and 192 seconds of real QPU compute, this campaign provides rigorous hardware validation of staggered dynamical decoupling in preserving two-qubit Bell state entanglement (|Φ+> = (|00> + |11>)/√2) against multi-qubit crosstalk and environmental dephasing. Definitive Scientific & Hardware Findings: Resolution of Historical Pulse Omission: Byte-level forensic audit of historical job dblr6lhkbkrc73co9h30 proved that prior 'YY suppression' claims arose because unspaced consecutive pulses collapsed algebraically during transpilation, executing zero physical DD pulses. All present circuits enforce calibrated 4.0 ns dt physical scheduling with explicit delay instructions. Massive Entanglement Protection over Bare Idle: Across all seven heavy-hex coupling edges, dynamical decoupling dramatically outperforms natural decoherence. Under 4.0 μs evolution on Edge (14, 15), Bell state coherence collapsed to ⟨XX⟩ = +0.5059 under IDLE, whereas STAG_XY8 preserved ⟨XX⟩ = +0.9419 ± 0.0104 (Fidelity F = 0.9492), an entanglement advantage of +0.4360. Statistically Significant Preservation Gain on Edge (14, 15): Across 10 independent paired hardware acquisition blocks, STAG_XY8 achieved a statistically significant correlation preservation gain over standard synchronous decoupling (SYNC_XY8): Δ⟨XX⟩ = +0.0186, with a 95% bootstrap confidence interval of [+0.0107, +0.0250] strictly excluding zero (p < 0.0001, 100% probability of superiority). Rigorous Non-Inferiority Verification Across 42 Paired Observations: Synthesizing all 42 paired hardware observations across all 7 physical edges, STAG_XY8 demonstrated strict statistical non-inferiority to standard synchronous decoupling (p = 0.00000 against a prespecified margin δ = -0.0200), achieving an overall mean Δ⟨XX⟩ = +0.0051 ± 0.0298 and an 86.0% global probability of superiority. Coupler-Dependent Stagger Landscape (Experiment C): An 8-offset sweep (Δ ∈ [0, 800] ns under 8.0 μs evolution) demonstrated that staggering does not rely on a singular delta-function resonance at 160 ns, but operates across an optimal physical protective band between 80 ns and 240 ns. SYS-021 Governed Execution: Every operational dispatch was authorized via immutable Ed25519 payload-bound grants signed by operator Devin Phillip Davis / Enki, anchored in a 5-block cryptographic ledger (evidence_ledger.db) and a 20-entry write-ahead hash ledger (ledger.jsonl). The deposition package includes the standalone LaTeX paper (OSIRIS_QPU_STAG_XY8_VALIDATION.tex), publication-ready vector figures, raw count dictionaries for all 648 circuits, compiled QPY binaries, and reproducible analysis evaluation code.

•Nov 4, 2026•5 citations

Spectator Phase Shift Scaling with Mid-Circuit Measurement Count and Its Mitigation via Virtual-Z Compensation on a Superconducting Quantum Processor - A Minimal Ramsey Diagnostic on IBM Quantum ibm_marrakesh (T = 40 μs) -

Toru Ishibashi

Abstract Dynamic circuits with mid-circuit measurement (MCM) and classical feed-forward are essential building blocks for quantum error correction and adaptive quantum protocols. However, in superconducting quantum processors the readout process can induce coherent crosstalk on non-measured (spectator) qubits through the readout resonator, residual photons, and other hardware pathways, leading to deterministic phase kicks (effective Z rotations) that accumulate with the number of MCM events. In this work we present a minimal, reproducible two-qubit Ramsey diagnostic to quantify the spectator-induced phase shift as a function of the number of inserted mid-circuit measurements M, and we demonstrate that a simple virtual-Z (frame) compensation proportional to M can mitigate the resulting phase error on real hardware. In a high-SNR dataset archived on Zenodo (T = 40 μs, 4096 shots per circuit), the effective phase difference Δθeff(M) = θMEAS(M) - θDELAY(M) shifts monotonically in the negative direction as M increases, reaching Δθeff (M=8) = -1.944 ± 0.033 rad. While the contrast r decreases mildly with M, it remains relatively high (r ≈ 0.84 at M = 8), consistent with the effect appearing predominantly as a coherent phase rotation. To mitigate the error, we insert a virtual-Z rotation on the target qubit of the form Rz (comp × M) in the MEAS condition and scan the compensation coefficient comp (rad per measurement). In a MAP dataset (ibm_marrakesh, shots = 512, repeats = 1, M ∈ {0,1,2,4,8}, comp ∈ {-0.02,-0.01,0,+0.01,+0.02}), the RMS of the baseline-referenced phase error Δθeff(M) for M>0 is minimized at comp = -0.01, decreasing from 0.1393 rad (baseline) to 0.0601 rad. Finally, we implement a low-cost calibration probe (M = {0,8}) scanning five compensation settings comp ∈{-0.02,-0.01,0,+0.01,+0.02} (1024 shots per circuit, repeats = 2) and estimate a session-dependent coefficient compopt ≈ -0.013 rad/measurement from a linear fit of Δθeff(M=8) versus comp. A same-session production sweep using comp = -0.01453 rad/measurement (close to compopt) shows a reduced residual phase error, supporting a practical probe → production workflow for dynamic-circuit execution.

•Jan 18, 2026•0 citations

Error Mitigation in the NISQ Era: Applying Measurement Error Mitigation Techniques to Enhance Quantum Circuit Performance

Misha Urooj Khan, Muhammad Ahmad Kamran, Wajiha Rahim Khan +3 more

In quantum computing, noisy intermediate-scale quantum (NISQ) devices offer unprecedented computational capabilities but are vulnerable to errors, notably measurement inaccuracies that impact computation accuracy. This study explores the efficacy of error mitigation techniques in improving quantum circuit performance on NISQ devices. Techniques such as dynamic decoupling (DD), twirled readout error extraction (T-REx) and zero-noise extrapolation (ZNE) are examined through extensive experimentation on an ideal simulator, IBM Kyoto, and IBM Osaka quantum computers. Results reveal significant performance discrepancies across scenarios, with error mitigation techniques notably enhancing both estimator result and variance values, aligning more closely with ideal simulator outcomes. The comparison results with ideal simulator (having expected result value 0.8284) shows that T-Rex has improved results on IBM Kyoto and enhanced average expected result value from 0.09 to 0.35. Similarly, DD has improved average expected result values from 0.2492 to 0.3788 on IBM Osaka. These findings underscore the critical role of error mitigation in bolstering quantum computation reliability. The results suggest that selection of mitigation technique depends upon quantum circuit and its depth, type of hardware and operations to be performed.

Mathematics•Jul 17, 2024•22 citations
We present an emulator-based and hardware feasibility study of Aurora-DD, a phase-coherence compensation method that integrates a sign-based feedback update of a global phase offset (Delta phi) with a fixed-depth XY8 dynamical decoupling (DD) scaffold. The feedback optimization is performed offline on a calibrated emulator and the resulting Delta phi* is deployed as pre-calibrated phase compensation on hardware. This represents an "offline closed-loop, online open-loop" feasibility demonstration. Using an Aer-based emulator calibrated with ibm_fez device parameters, Aurora-DD achieves substantial reductions in mean-squared error of the measured expectation value <Z>, yielding 68-97% improvement across phase settings phi = 0.05, 0.10, 0.15, 0.20 over n=30 randomized trials. These large-n emulator results provide statistically stable evidence that the combined effect of XY8 and Delta phi* suppresses both dephasing and systematic phase bias. On real superconducting hardware (ibm_fez), we perform a small-sample (n=3) multi-phase validation campaign. Aurora-DD yields point estimates corresponding to approximately 99.2-99.6% reduction in absolute error relative to a no-DD baseline across all tested phase points. These hardware numbers are reported transparently as feasibility evidence under tight queue and credit constraints. In contrast, the auxiliary Aurora+ZNE branch exhibits instability: shallow two-point ZNE occasionally amplifies calibration inconsistencies and produces large error outliers. We therefore relegate ZNE analysis to the Appendix and position Aurora-DD (without ZNE) as the primary contribution. Overall, the combined results support pre-calibrated Aurora-DD as a practical, stable, and hardware-compatible phase-coherence compensator for NISQ devices in single-qubit settings.
We investigate whether a training-free thermodynamic stability metric Φ = I × ρ - α × S, computed from IBM Quantum calibration or telemetry data, can drive closed-loop intervention decisions during execution-associated monitoring windows on real hardware. Across 10 paid circuit tests on three IBM backends (ibm_fez, ibm_marrakesh, ibm_torino), together with simulated and telemetry-based harness validation, we evaluate a closed-loop controller that monitors Φ during an execution-associated window and supports five intervention actions: CONTINUE, CONTINUE-DEGRADED, CLASSICAL-FALLBACK, CHECKPOINT-MIGRATE, and ABORT-RESTART. In a same-circuit controlled comparison on ibm_fez, swapping LOW-Φ qubits (Φ = 0.097, 0.030) for HIGH-Φ qubits (Φ = 0.9988, 0.9984) reduced error from 18.36% to 2.73% on an identical Deutsch-Jozsa circuit, an 85.1% relative error reduction. Under matched conditions, composite Φ selection outperformed raw T2 selection by 7.79 percentage points on ibm_fez (68.7% relative reduction) and by 6.37 percentage points aggregate across three backends. Mid-circuit dynamic branching on IBM hardware achieved 98.78% per-shot conditional consistency between probe outcome and branch marker, with an estimated 101,220 logical gates avoided on the ABORT path. A Wilson confidence interval non-overlap rule triggered ABORT-RESTART on 1 of 3 backends in the tested setting. Classical checkpoint representation at a segmentation boundary enabled suffix migration from LOW-Φ to HIGH-Φ qubits with 82.15% final fidelity, without storing an unknown quantum state. Honest counterexamples are preserved: in a three-policy cost comparison a seeded random pair outperformed the Φ-guided pair on ibm_fez, and on ibm_marrakesh raw T2 selection outperformed Φ selection under matched compiled circuit conditions. These results support a closed-loop intervention framework in which Φ can operate as a control variable during execution-associated monitoring rather than only as a pre-execution selection score. The methods described in this paper are the subject of U.S. Provisional Patent Application No. 63/973,723 (filed February 2, 2026). No license to implement or commercialize the described methods is granted by this publication. All rights reserved.
Dynamic circuits with mid-circuit measurement (MCM) and classical feed-forward are essential building blocks for quantum error correction and adaptive quantum protocols. However, in superconducting quantum processors the readout process can induce coherent crosstalk on non-measured (spectator) qubits through the readout resonator, residual photons, and other hardware pathways, leading to deterministic phase kicks (effective Z rotations) that accumulate with the number of MCM events. In this work we present a minimal, reproducible two-qubit Ramsey diagnostic to quantify the spectator-induced phase shift as a function of the number of inserted mid-circuit measurements M, and we demonstrate that a simple virtual-Z (frame) compensation proportional to M can mitigate the resulting phase error on real hardware. In a high-SNR dataset archived on Zenodo (T = 40 μs, 4096 shots per circuit), the effective phase difference Δθeff(M) = θMEAS(M) - θDELAY(M) shifts monotonically in the negative direction as M increases, reaching Δθeff (M=8) = -1.944 ± 0.033 rad. While the contrast r decreases mildly with M, it remains relatively high (r ≈ 0.84 at M = 8), consistent with the effect appearing predominantly as a coherent phase rotation. To mitigate the error, we insert a virtual-Z rotation on the target qubit of the form Rz (comp × M) in the MEAS condition and scan the compensation coefficient comp (rad per measurement). In a MAP dataset (ibm_marrakesh, shots = 512, repeats = 1, M ∈ {0,1,2,4,8}, comp ∈ {-0.02,-0.01,0,+0.01,+0.02}), the RMS of the baseline-referenced phase error DθCT(M) for M>0 is reduced from 0.1393 rad (baseline) to 0.0601 rad at comp = -0.01, demonstrating effective error reduction with a single-parameter circuit-level correction. Finally, using a pay-as-you-go execution environment we run a low-cost “calibration probe” (M = {0,8}, three comp points, 32 circuits total) and obtain compopt ≈ +0.0088 rad/measurement from a three-point linear fit. This supports a practical two-stage workflow in which a short probe estimates the session-dependent compensation coefficient, followed by same-session production runs with the calibrated virtual-Z correction.
Abstract Dynamic circuits with mid-circuit measurement (MCM) and classical feed-forward are essential building blocks for quantum error correction and adaptive quantum protocols. However, in superconducting quantum processors the readout process can induce coherent crosstalk on non-measured (spectator) qubits through the readout resonator, residual photons, and other hardware pathways, leading to deterministic phase kicks (effective Z rotations) that accumulate with the number of MCM events. In this work we present a minimal, reproducible two-qubit Ramsey diagnostic to quantify the spectator-induced phase shift as a function of the number of inserted mid-circuit measurements M, and we demonstrate that a simple virtual-Z (frame) compensation proportional to M can mitigate the resulting phase error on real hardware. In a high-SNR dataset archived on Zenodo (T = 40 μs, 4096 shots per circuit), the effective phase difference Δθeff(M) = θMEAS(M) - θDELAY(M) shifts monotonically in the negative direction as M increases, reaching Δθeff (M=8) = -1.944 ± 0.033 rad. While the contrast r decreases mildly with M, it remains relatively high (r ≈ 0.84 at M = 8), consistent with the effect appearing predominantly as a coherent phase rotation. To mitigate the error, we insert a virtual-Z rotation on the target qubit of the form Rz (comp × M) in the MEAS condition and scan the compensation coefficient comp (rad per measurement). In a MAP dataset (ibm_marrakesh, shots = 512, repeats = 1, M ∈ {0,1,2,4,8}, comp ∈ {-0.02,-0.01,0,+0.01,+0.02}), the RMS of the baseline-referenced phase error Δθeff(M) for M>0 is minimized at comp = -0.01, decreasing from 0.1393 rad (baseline) to 0.0601 rad. Finally, we implement a low-cost calibration probe (M = {0,8}) scanning five compensation settings comp ∈ {-0.02,-0.01,0,+0.01,+0.02} (1024 shots per circuit, repeats = 2) and estimate a session-dependent coefficient compopt ≈ -0.013 rad/measurement from a linear fit of Δθeff(M=8) versus comp. A same-session production sweep using comp = -0.01453 rad/measurement (close to compopt) shows a reduced residual phase error, supporting a practical probe → production workflow for dynamic-circuit execution. All analysis scripts and summary data are made publicly available to support independent reproduction of the reported phase metrics and figures.
OSIRIS Physical QPU Validation Campaign Deliverable (v1.0) This deposition contains the complete empirical evidence, raw shot count dictionaries, instruction-set architecture (ISA) compiled circuits, physical schedule audits, analysis scripts, publication figures, and LaTeX manuscript for the OSIRIS Staggered Dynamical Decoupling (STAG_XY8) Validation Campaign executed on ibm_marrakesh, a 156-qubit IBM Quantum Heron r2 processor. Across four independent hardware acquisition jobs comprising 648 ISA circuits, 663,552 physical shots, and 192 seconds of real QPU compute, this campaign provides rigorous hardware validation of staggered dynamical decoupling in preserving two-qubit Bell state entanglement (|Φ+> = (|00> + |11>)/√2) against multi-qubit crosstalk and environmental dephasing. Definitive Scientific & Hardware Findings: Resolution of Historical Pulse Omission: Byte-level forensic audit of historical job dblr6lhkbkrc73co9h30 proved that prior 'YY suppression' claims arose because unspaced consecutive pulses collapsed algebraically during transpilation, executing zero physical DD pulses. All present circuits enforce calibrated 4.0 ns dt physical scheduling with explicit delay instructions. Massive Entanglement Protection over Bare Idle: Across all seven heavy-hex coupling edges, dynamical decoupling dramatically outperforms natural decoherence. Under 4.0 μs evolution on Edge (14, 15), Bell state coherence collapsed to ⟨XX⟩ = +0.5059 under IDLE, whereas STAG_XY8 preserved ⟨XX⟩ = +0.9419 ± 0.0104 (Fidelity F = 0.9492), an entanglement advantage of +0.4360. Statistically Significant Preservation Gain on Edge (14, 15): Across 10 independent paired hardware acquisition blocks, STAG_XY8 achieved a statistically significant correlation preservation gain over standard synchronous decoupling (SYNC_XY8): Δ⟨XX⟩ = +0.0186, with a 95% bootstrap confidence interval of [+0.0107, +0.0250] strictly excluding zero (p < 0.0001, 100% probability of superiority). Rigorous Non-Inferiority Verification Across 42 Paired Observations: Synthesizing all 42 paired hardware observations across all 7 physical edges, STAG_XY8 demonstrated strict statistical non-inferiority to standard synchronous decoupling (p = 0.00000 against a prespecified margin δ = -0.0200), achieving an overall mean Δ⟨XX⟩ = +0.0051 ± 0.0298 and an 86.0% global probability of superiority. Coupler-Dependent Stagger Landscape (Experiment C): An 8-offset sweep (Δ ∈ [0, 800] ns under 8.0 μs evolution) demonstrated that staggering does not rely on a singular delta-function resonance at 160 ns, but operates across an optimal physical protective band between 80 ns and 240 ns. SYS-021 Governed Execution: Every operational dispatch was authorized via immutable Ed25519 payload-bound grants signed by operator Devin Phillip Davis / Enki, anchored in a 5-block cryptographic ledger (evidence_ledger.db) and a 20-entry write-ahead hash ledger (ledger.jsonl). The deposition package includes the standalone LaTeX paper (OSIRIS_QPU_STAG_XY8_VALIDATION.tex), publication-ready vector figures, raw count dictionaries for all 648 circuits, compiled QPY binaries, and reproducible analysis evaluation code.
Abstract Dynamic circuits with mid-circuit measurement (MCM) and classical feed-forward are essential building blocks for quantum error correction and adaptive quantum protocols. However, in superconducting quantum processors the readout process can induce coherent crosstalk on non-measured (spectator) qubits through the readout resonator, residual photons, and other hardware pathways, leading to deterministic phase kicks (effective Z rotations) that accumulate with the number of MCM events. In this work we present a minimal, reproducible two-qubit Ramsey diagnostic to quantify the spectator-induced phase shift as a function of the number of inserted mid-circuit measurements M, and we demonstrate that a simple virtual-Z (frame) compensation proportional to M can mitigate the resulting phase error on real hardware. In a high-SNR dataset archived on Zenodo (T = 40 μs, 4096 shots per circuit), the effective phase difference Δθeff(M) = θMEAS(M) - θDELAY(M) shifts monotonically in the negative direction as M increases, reaching Δθeff (M=8) = -1.944 ± 0.033 rad. While the contrast r decreases mildly with M, it remains relatively high (r ≈ 0.84 at M = 8), consistent with the effect appearing predominantly as a coherent phase rotation. To mitigate the error, we insert a virtual-Z rotation on the target qubit of the form Rz (comp × M) in the MEAS condition and scan the compensation coefficient comp (rad per measurement). In a MAP dataset (ibm_marrakesh, shots = 512, repeats = 1, M ∈ {0,1,2,4,8}, comp ∈ {-0.02,-0.01,0,+0.01,+0.02}), the RMS of the baseline-referenced phase error Δθeff(M) for M>0 is minimized at comp = -0.01, decreasing from 0.1393 rad (baseline) to 0.0601 rad. Finally, we implement a low-cost calibration probe (M = {0,8}) scanning five compensation settings comp ∈{-0.02,-0.01,0,+0.01,+0.02} (1024 shots per circuit, repeats = 2) and estimate a session-dependent coefficient compopt ≈ -0.013 rad/measurement from a linear fit of Δθeff(M=8) versus comp. A same-session production sweep using comp = -0.01453 rad/measurement (close to compopt) shows a reduced residual phase error, supporting a practical probe → production workflow for dynamic-circuit execution.
In quantum computing, noisy intermediate-scale quantum (NISQ) devices offer unprecedented computational capabilities but are vulnerable to errors, notably measurement inaccuracies that impact computation accuracy. This study explores the efficacy of error mitigation techniques in improving quantum circuit performance on NISQ devices. Techniques such as dynamic decoupling (DD), twirled readout error extraction (T-REx) and zero-noise extrapolation (ZNE) are examined through extensive experimentation on an ideal simulator, IBM Kyoto, and IBM Osaka quantum computers. Results reveal significant performance discrepancies across scenarios, with error mitigation techniques notably enhancing both estimator result and variance values, aligning more closely with ideal simulator outcomes. The comparison results with ideal simulator (having expected result value 0.8284) shows that T-Rex has improved results on IBM Kyoto and enhanced average expected result value from 0.09 to 0.35. Similarly, DD has improved average expected result values from 0.2492 to 0.3788 on IBM Osaka. These findings underscore the critical role of error mitigation in bolstering quantum computation reliability. The results suggest that selection of mitigation technique depends upon quantum circuit and its depth, type of hardware and operations to be performed.