Entangling gates between neighboring physical qubits are essential for quantum error correction. Implementing them in an all-microwave manner simplifies signal routing and control apparatus of superconducting quantum processors. We propose and experimentally demonstrate an all-microwave controlled-Z (CZ) gate that achieves high fidelity while suppressing residual ZZ interactions. Our approach utilizes a fixed-frequency transmon coupler and multi-path coupling, thereby sufficiently reducing the net transverse interaction between data transmons to suppress residual ZZ interactions. The controlled phase arises from the dispersive frequency shift of the $|gf\rangle$$\unicode{x2013}$$|eg\rangle$ transition between the coupler and one of the data transmons conditioned on the state of the other data transmon. Driving the transitions at the midpoint of two dispersively shifted resonance frequencies induces state-dependent geometric phases to achieve the CZ gate. Crucially, with this scheme, we can maintain a small net transverse interaction between two data transmons while increasing the coupling between the data and coupler transmons to accelerate the CZ-gate speed. Additionally, we measure the coupler state after the gate to detect a subset of decoherence-induced failures that occur during the gate operation. These events constitute erasure errors with known locations, enabling erasure-aware quantum error-correcting codes to improve future logical qubit performance.
Comments
Equations (I9), (J4), and (J6) are corrected. The correction of Eq. (J6) changes the values of $p'_\mathrm{idle}$ and $R_\mathrm{1st}$
Entangling gates between neighboring physical qubits are essential for quantum error correction. Implementing them in an all-microwave manner simplifies signal routing and control apparatus of superconducting quantum processors. We propose and experimentally demonstrate an all-microwave controlled-Z (CZ) gate that achieves high fidelity while suppressing residual ZZ interactions. Our approach utilizes a fixed-frequency transmon coupler and multi-path coupling, thereby sufficiently reducing the net transverse interaction between data transmons to suppress residual ZZ interactions. The controlled phase arises from the dispersive frequency shift of the |gf\rangle$$\unicode{x2013}$$|eg\rangle transition between the coupler and one of the data transmons conditioned on the state of the other data transmon. Driving the transitions at the midpoint of two dispersively shifted resonance frequencies induces state-dependent geometric phases to achieve the CZ gate. Crucially, with this scheme, we can maintain a small net transverse interaction between two data transmons while increasing the coupling between the data and coupler transmons to accelerate the CZ-gate speed. Additionally, we measure the coupler state after the gate to detect a subset of decoherence-induced failures that occur during the gate operation. These events constitute erasure errors with known locations, enabling erasure-aware quantum error-correcting codes to improve future logical qubit performance.
Abstract High-quality entangling gates are crucial for scalable quantum information processing. Implementing all-microwave two-qubit gates on fixed-frequency transmons offers advantages in reducing wiring complexity, but the gate performance is often limited due to the residual ZZ interaction and the frequency crowding problem. Here, we introduce a novel scheme that enables a microwave drive-activated CZ gate compatible with the coupler structure to suppress the residual ZZ interaction. The microwave drive is applied to the coupler and the microwave drive frequency remains far detuned from the system’s transition frequency to alleviate the frequency crowding problem. We model the gate process analytically and demonstrate a theoretical gate fidelity up to 99.9% numerically. Our scheme is compatible with current coupler-structure-based circuits, and insensitive to microwave crosstalk, showing a possible path for all-microwave quantum operations at scale.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within 25ns, with an average gate fidelity exceeding 99.99% and leakage below 10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately 99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below 10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
All-microwave control of fixed-frequency superconducting quantum computing circuits is advantageous for minimizing the noise channels and wiring costs. Here we introduce a swap interaction between two data transmons assisted by the third-order nonlinearity of a coupler transmon under a microwave drive. We model the interaction analytically and numerically and use it to implement an all-microwave controlled-Z gate. The gate based on the coupler-assisted swap transition maintains high drive efficiency and small residual interaction over a wide range of detuning between the data transmons.
Scalable superconducting quantum processors require balancing critical constraints in coherence, control complexity, and spectral crowding. Fixed-frequency architectures suppress flux noise and simplify control via all-microwave operations but remain limited by residual ZZ crosstalk. Here we propose a microwave-activated three-qubit gate protocol for fixed-frequency transmon qubits in the large-detuning regime (∣Δ∣≫g), leveraging the third-order nonlinear interaction to coherently exchange ∣001⟩↔∣110⟩ states. By incorporating a phase-compensated optimization protocol, numerical simulations demonstrate a high average gate fidelity exceeding 99.9%. Systematic error analysis identifies static long-range ZZ coupling as the dominant error source in multi-qubit systems, which can be suppressed via operations in the large-detuning regime (∼1 GHz). The protocol maintains process fidelities exceeding 98% under decoherence, while demonstrating intrinsic robustness to fabrication-induced parameter variations and compatibility with existing all-microwave two-qubit gate architectures. This hardware-efficient strategy advances scalable quantum computing systems by improving coherence properties, reducing spectral congestion, and expanding the experimental toolkit for error-resilient quantum operations in the noisy intermediate-scale quantum era.
Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmon qubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.