Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.23052 · Physical Review Letters

Wavefront Mapping for Absolute Atom Interferometry

Joseph Junca, John E. Kitching, William McGehee

Published Mar 12, 2026• 4 citations
arXivHTMLPDF

Abstract

Wavefront distortions are a leading source of systematic uncertainty in light-pulse atom interferometry, limiting absolute measurements of gravitational acceleration at the 30 nm/s^{2} level. Here, we demonstrate in situ spatially resolved measurement of the interferometer phase in a Mach-Zehnder atom interferometer as a tool to characterize and correct wavefront bias. By introducing controllable curvature of the Raman light using an adjustable collimation retro-reflector, we show that the bias due to parabolic wavefront curvature can be measured with 1 mrad uncertainty and that finite-size corrections impact the measured phase curvature. This measurement process could be adopted in optimized atom interferometer gravimeters to reduce wavefront bias uncertainty below the nm/s^{2} level.

DOI
10.1103/2c2j-qhkd

Related papers

Improving the Accuracy of Atom Gravimeters with Ultracold Sources

Romain Karcher, Almazbek Imanaliev, Sébastien Merlet +1 more

Summary form only given. Atom interferometry based on cold atoms and light beamsplitters is a mature technique, which allows for the realization of highly sensitive inertial sensors. In the most advanced inertial sensors based on atom interferometry, atomic wavepackets are manipulated by light beamsplitters using two-photon Raman transitions. The interferometer phase shift, which depends on the acceleration and the rotation of the experimental setup with respect to the inertial reference frame defined by the atoms in free fall, is derived from the relative displacement of the atoms with respect to the beamsplitter laser's equiphases. Wavefront aberrations thus induce parasitic phase shifts, which bias the measurement, and which are linked to the residual ballistic motion of the atoms across the laser beam profile during their free fall and cancels out at zero atomic temperature. The wavefront distortions of the lasers beamsplitters is an important limit in the accuracy of atom interferometers and in particular, the dominating contribution in best cold atom gravimeters (CAG) uncertainty budget. This work clears the way towards unprecedented accuracies for absolute gravimetry, below the 1 μGal level. The method proposed can be applied to any atomic sensor based on light beamsplitters, which are inevitably affected by distortions of the lasers wavefronts. The improved control of systematics it provides will have significant impact in high precision measurements with atom interferometry, with important applications to geodesy, fundamental physics tests and to the development of highest grade inertial sensors.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

In situ measurement of the wavefront phase shift in an atom interferometer

Wen-Jie Xu, Jie Liu, Qin Luo +2 more

Wavefront aberrations have significant impacts on the accuracy and long-term stability of cold-atom interferometers. This research presents an in situ method for directly measuring the phase shift induced by the wavefront of the Raman beam using the atom interferometer itself. To validate the feasibility of this approach, experiments involving the insertion of a glass plate with a known surface figure into the Raman beam path have been carried out. The phase introduced by the glass plate is measured experimentally by the atom interferometer and calculated theoretically based on the wavefront obtained from the wavefront sensor, and we find good agreement of the experimental results with the theoretical calculations. The method not only allows for the assessment of systematic errors in an atom interferometer, but also provides the capability to retroactively compute the wavefront of Raman beams based on the measured phase shift. The wavefront distribution of the glass plate is inversed from the phase measured by the atom interferometer. This inversed wavefront distribution is consistent with the surface of the glass plate measured by the wavefront sensor, which confirms the effectiveness of the method. This work provides a valuable approach to evaluate the systematic errors in atom interferometers that are sensitive to wavefront aberrations. Furthermore, it offers a novel method to measure the wavefront using atoms.

Physical Review Applied•Nov 6, 2024•6 citations

High-Sensitivity Absolute Atomic Gravimeter

Christine Guerlin, Tristan Farah, Anne Louchet-Chauvet +2 more

Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.

Research in Optical Sciences•Jan 1, 2012•0 citations

Local measurement scheme of gravitational curvature using atom interferometers

Michael Werner, Ali Lezeik, Dennis Schlippert +3 more

Abstract Light pulse atom interferometers (AIFs) are exquisite quantum probes of spatial inhomogeneity and gravitational curvature. Moreover, detailed measurement and calibration are necessary prerequisites for very-long-baseline atom interferometry (VLBAI). Here we provide a theoretical analysis of the phase resulting in a complex gravitational environment and introduce a novel interferometer geometry which singles out the phase shift proportional to the curvature of the gravitational potential. The scale factor depends only on well controlled quantities, namely the photon wave number, the interferometer time and the atomic recoil, which allows the curvature to be accurately inferred from a measured phase. As a case study, we numerically simulate such a gradiometric interferometer in the context of the Hannover VLBAI facility and prove the robustness of the phase shift in gravitational fields with complex spatial dependence. We define an estimator of the gravitational curvature for non-trivial gravitational fields and calculate the trade-off between signal strength and estimation accuracy with regard to spatial resolution. As a perspective, we discuss the case of a time-dependent gravitational field and corresponding measurement strategies.

arXiv:2409.03515•Communications Physics•Nov 14, 2025•3 citations

An atom interferometer for measuring horizontal accelerations

Jimmy Stammers

Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.

•Nov 1, 2018•6 citations

Active Control of Laser Wavefronts in Atom Interferometers

Azer Trimeche, Mehdi Langlois, Sébastien Merlet +1 more

Optical aberrations in light-pulse atom interferometers are a major limitation in the accuracy and stability of these quantum sensors. In a proof-of-principle experiment, the authors use a deformable mirror to actively control the laser wave fronts in a cold-atom gravimeter, compensating for the distortions induced by optical elements. This fine control of wave fronts opens perspectives for atom interferometry, with applications in navigation, space physics, and high-precision metrology.

arXiv:1704.07088•Physical Review Applied•Mar 23, 2017•47 citations
Wavefront distortions are a leading source of systematic uncertainty in light-pulse atom interferometry, limiting absolute measurements of gravitational acceleration at the 30 nm/s^{2} level. Here, we demonstrate in situ spatially resolved measurement of the interferometer phase in a Mach-Zehnder atom interferometer as a tool to characterize and correct wavefront bias. By introducing controllable curvature of the Raman light using an adjustable collimation retro-reflector, we show that the bias due to parabolic wavefront curvature can be measured with 1 mrad uncertainty and that finite-size corrections impact the measured phase curvature. This measurement process could be adopted in optimized atom interferometer gravimeters to reduce wavefront bias uncertainty below the nm/s^{2} level.
Summary form only given. Atom interferometry based on cold atoms and light beamsplitters is a mature technique, which allows for the realization of highly sensitive inertial sensors. In the most advanced inertial sensors based on atom interferometry, atomic wavepackets are manipulated by light beamsplitters using two-photon Raman transitions. The interferometer phase shift, which depends on the acceleration and the rotation of the experimental setup with respect to the inertial reference frame defined by the atoms in free fall, is derived from the relative displacement of the atoms with respect to the beamsplitter laser's equiphases. Wavefront aberrations thus induce parasitic phase shifts, which bias the measurement, and which are linked to the residual ballistic motion of the atoms across the laser beam profile during their free fall and cancels out at zero atomic temperature. The wavefront distortions of the lasers beamsplitters is an important limit in the accuracy of atom interferometers and in particular, the dominating contribution in best cold atom gravimeters (CAG) uncertainty budget. This work clears the way towards unprecedented accuracies for absolute gravimetry, below the 1 μGal level. The method proposed can be applied to any atomic sensor based on light beamsplitters, which are inevitably affected by distortions of the lasers wavefronts. The improved control of systematics it provides will have significant impact in high precision measurements with atom interferometry, with important applications to geodesy, fundamental physics tests and to the development of highest grade inertial sensors.
Wavefront aberrations have significant impacts on the accuracy and long-term stability of cold-atom interferometers. This research presents an in situ method for directly measuring the phase shift induced by the wavefront of the Raman beam using the atom interferometer itself. To validate the feasibility of this approach, experiments involving the insertion of a glass plate with a known surface figure into the Raman beam path have been carried out. The phase introduced by the glass plate is measured experimentally by the atom interferometer and calculated theoretically based on the wavefront obtained from the wavefront sensor, and we find good agreement of the experimental results with the theoretical calculations. The method not only allows for the assessment of systematic errors in an atom interferometer, but also provides the capability to retroactively compute the wavefront of Raman beams based on the measured phase shift. The wavefront distribution of the glass plate is inversed from the phase measured by the atom interferometer. This inversed wavefront distribution is consistent with the surface of the glass plate measured by the wavefront sensor, which confirms the effectiveness of the method. This work provides a valuable approach to evaluate the systematic errors in atom interferometers that are sensitive to wavefront aberrations. Furthermore, it offers a novel method to measure the wavefront using atoms.
Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.
Abstract Light pulse atom interferometers (AIFs) are exquisite quantum probes of spatial inhomogeneity and gravitational curvature. Moreover, detailed measurement and calibration are necessary prerequisites for very-long-baseline atom interferometry (VLBAI). Here we provide a theoretical analysis of the phase resulting in a complex gravitational environment and introduce a novel interferometer geometry which singles out the phase shift proportional to the curvature of the gravitational potential. The scale factor depends only on well controlled quantities, namely the photon wave number, the interferometer time and the atomic recoil, which allows the curvature to be accurately inferred from a measured phase. As a case study, we numerically simulate such a gradiometric interferometer in the context of the Hannover VLBAI facility and prove the robustness of the phase shift in gravitational fields with complex spatial dependence. We define an estimator of the gravitational curvature for non-trivial gravitational fields and calculate the trade-off between signal strength and estimation accuracy with regard to spatial resolution. As a perspective, we discuss the case of a time-dependent gravitational field and corresponding measurement strategies.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.