A central problem in the deployment of quantum technologies is the realization of robust architectures for quantum interconnects. We propose to engineer interconnects in semiconductors and insulators by patterning spin qubits at dislocations, thus forming quasi one-dimensional lines of entangled point defects. To gain insight into the feasibility and control of dislocation-driven interconnects, we investigate the optical cycle and coherence properties of nitrogen-vacancy (NV) centers in diamond, in proximity of dislocations, using a combination of advanced first-principles calculations. We show that one can engineer spin defects with properties similar to those of their bulk counterparts, including charge stability and a favorable optical cycle, and that NV centers close to dislocations have much improved coherence properties. Finally, we predict optically detected magnetic resonance spectra that may facilitate the experimental identification of specific defect configurations. Our results provide a theoretical foundation for the engineering of one-dimensional arrays of spin defects in the solid state.
A central problem in the deployment of quantum technologies is the realization of robust architectures for quantum interconnects. We propose to engineer interconnects in semiconductors and insulators by patterning spin qubits at dislocations, thus forming quasi one-dimensional lines of entangled point defects. To gain insight into the feasibility and control of dislocation-driven interconnects, we investigate the optical cycle and coherence properties of nitrogen-vacancy (NV) centers in diamond, in proximity of dislocations, using a combination of advanced first-principles calculations. We show that one can engineer spin defects with properties similar to those of their bulk counterparts, including charge stability and a favorable optical cycle, and that NV centers close to dislocations have much improved coherence properties. Finally, we predict optically detected magnetic resonance spectra that may facilitate the experimental identification of specific defect configurations. Our results provide a theoretical foundation for the engineering of one-dimensional arrays of spin defects in the solid state.
This work investigates the applicability of the nitrogen-vacancy (NV) defect center in diamond for quantum computation and metrology purposes. The NV center is a molecule like defect in the diamond lattice which is optically active and possesses an electron spin in its ground state. The spin can be used as a quantum bit and as a field sensor. The NV center has three major properties enabling individual control of single defects. Its optical properties depend on the spin state, the spin can be polarized optically and the spin state has an exceptionally long lifetime. Single NV centers can be controlled by optical and microwave radiation. Generally, the research on individually controllable quantum systems is not only motivated by quantum computation and communication. With the ongoing miniaturization nowadays electronic and electro-optic devices will soon reach the limit of single quantum building blocks. While in these applications the full complexity of single quantum systems might not be needed, small sensors based on single atoms or molecules might very well take advantage of the susceptibility of quantum coherences to environmental conditions. Major challenges for all approaches towards single quantum system control are the individual addressing, the measurement of the quantum state and the protection of quantum coherence from environmental noise. Today, there is a variety of systems (including the NV center) that allow control on the single quantum level. These are for example single photons, single ions and atoms in traps, single spins in semiconductors or single molecules in solid state systems. Rather mesoscopic examples are superconducting devices, nanomechanical oscillators or surface plasmon polaritons. Regarding the NV center it has been shown that the magnetic moment of its electron spin allows individual sensing and coupling to other surrounding electron and nuclear spins. Especially single nuclear spins were shown to be exceptional quantum memories. In this work small quantum registers of up to 5 spins have been used to test major requirements for a feasible quantum processor. Therefore, mainly artificially created high purity diamond samples with controlled spin and impurity concentration were used. The NV centers were either grown in or created via ion implantation techniques in a controlled fashion. As a first requirement for quantum computation entanglement among up to three spins has been generated and was verified by quantum state tomography. This proves the access of the full Hilbert space. Especially, entanglement among nuclear spins was very long-living. In further experiments this processor was used for first quantum algorithms like super-dense coding and the Deutsch algorithm. In addition, this work demonstrates new methods to initialize nuclear spin qubits into a desired quantum state. This is particularly important as improper initialization inhibits quantum computation. One of these methods is related to dynamic nuclear spin polarization and the other to measurement based state preparation. Nuclear spins in the diamond lattice originate mainly from the C-13 isotope. By artificially altering its content the influence on the NV center spin was investigated. The coherence times of the NV center were increasing inversely with the nuclear spin density. Even increasing nuclear spin density to offer more nuclear spin qubits to an operational quantum register was possible. As an alternative route of scaling up the quantum register pairs of closely spaced NV centers were investigated. For the first time two qubit gates among two NV centers mediated by magnetic dipolar coupling have been realized. Furthermore the sensing ability was demonstrated by measuring the relative distance of the two centers (10 nm) with sub-nm precision. Eventually, this work contains new insight into the electronically excited state of the NV center which allowed a more advanced control of the electron and nuclear spins. A comparably high magnetic field was used to decouple electron and nuclear spins. Finally, this allowed quantum nondemolition measurements on single nuclear spins which manifests in the observation of quantum jumps. The new insight was used to drastically improve the performance of quantum state readout. Summarizing, it was shown that single NV centers and proximal nuclear spins form versatile small quantum registers which can be interconnected with neighboring such NV quantum registers. Although the number of qubits used in this work is still small the experimental results propose a way of how to proceed when building a quantum computer. Regarding quantum metrology, however, the use of such a small register which can sense fields and store and process the results would already outperform a single NV electron spin by orders of magnitude.
Solid-state technologies for quantum mechanical application require delicate materials that can operate stably with a long coherence time. Nitrogen vacancy (NV) centers in diamond is one of the most promising candidates for quantum physics, with applications such as single photon emitters, quantum computation, and magnetic sensor.\n\nTo fully exploit the capability of defect centers in diamond for opto-electronics and quantum engineering, a number of improvements are needed. Among these are optimization of the NV centers yield in bulk diamond, nanodiamond (ND) size reduction, photocurrent study of the defect band-trap electronic structure in diamonds, and optimization of high-speed NV qubit control. For NV centers yield optimization, both the experimental magnetic sensitivity optimization as well as theoretical simulation of NV concentration are implemented. For NDs size characterization, we analyzed the size and photon autocorrelation function of NV in NDs after air oxidation treatment using a combined atomic force microscopy/confocal system. To study defect band-trap electronic structure in diamond, excitation and quenching as well as the recovery of the quenched photocurrent was investigated to better understand photocurrent dynamics in diamond. For qubit high-speed control optimization, a microwave pulse based on a nonlinear numeric solution of the Schrodinger equation is used to rotate the NV spin faster than the ordinary Rabi flip rate. Together these approaches promise to significantly speed up the development of diamond for quantum engineering applications.
The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.
Defect based qubit systems like the nitrogen vacancy center in diamond have recently emerged as promising candidates for quantum technologies due to their combination of long coherence times, room temperature operation, and robust optical interface. In order to realize many of their proposed applications, defect qubits must be incorporated into scalable devices architectures consisting of photonic, mechanical, or electrical degrees of freedom. Despite much recent progress, many challenges remain for diamond growth and device fabrication. As an alternate approach, we engaged in a search for nitrogen vacancy center analogues in alternative materials with the hope of obtaining a greater degree of control over defect and material properties. Ultimately, we discovered that divacancy-related point defects in all three of the most common forms of silicon carbide- termed 4H, 6H, and 3C- act as analogues to the nitrogen vacancy center in diamond. We chose to focus our research primarily on defects in 3C silicon carbide (termed 'Ky5' defects) because of its availability as a single crystal heteroepitaxial thin film grown on silicon, an advantage that greatly facilitates the fabrication of functional devices. We characterized the spin and optical properties of Ky5 defects in thin film geometries and observed many similarities to the nitrogen vacancy center. We performed the first measurements of spin dynamics in 3C silicon carbide and demonstrate coherent control of defect spins up to room temperature and observe coherence times of up to 22 microseconds. To demonstrate their use in real devices, we designed, fabricated, and characterized photonic crystal cavities in 3C silicon carbide thin films with mode volumes of less than (lambda/n)^3 and Q's as high as 1,500 with integrated Ky5 defects. Additionally, we performed simulations and analysis of the fabricated structures using observed structural imperfections to determine that the Q's are likely limited primarily by the non-vertical structure sidewall angle. Despite the modest Q's of these structures, they can be utilized to generate large local field intensities to enhance optical interactions with Ky5 qubit states within the cavities. We accomplish this by performing cavity enhanced photoluminescence excitation spectroscopy on cavity modes tuned to the zero phonon line of the defects and observe large (as high as 30 times) increases in the luminescence and optically detected magnetic resonance signals originating from the defect states and approximately 2x faster rates of ground state spin initialization. In addition, we use these techniques to probe the photoluminescence dynamics of the Ky5 defects' optical pumping cycle, perform excitation wavelength dependent studies of spin and spectral inhomogeneity, and use the small mode volume and narrowband photoluminescence enhancements of the cavities to observe spectrally distinct subensembles of defects with linewidths as narrow as 25 GHz within the inhomogeneously broadened zero phonon line. Although much is still unknown regarding the properties of these defects, they show great promise as a candidate system for defect qubit based quantum devices and technologies.
Dimensionality plays a central role in determining the collective behavior of interacting quantum systems. Engineering strongly interacting ensembles of solid-state spin defects in reduced dimensions remains a significant challenge at the interface between the applied and fundamental sciences. Here, we create and characterize a positionally disordered, quasi-one-dimensional spin chain in diamond, consisting of optically dark substitutional nitrogen defects (P1 centers) and optically addressable probe nitrogen-vacancy (NV) centers. Our approach exploits the preferential incorporation of nitrogen along step bunches formed during chemical vapor deposition to achieve both lateral and vertical confinement. Combining spatially resolved materials characterization with nanoscale quantum sensing, we establish the one-dimensional character of the optically dark, unpolarized P1 spin ensemble. We then use correlation spectroscopy to probe local spin autocorrelations and investigate infinite-temperature dipolar spin transport. Our results establish a materials-based route for engineering low-dimensional quantum spin systems.
Electronic spin defects in the environment of an optically active spin can be used to increase the size and hence the performance of solid-state quantum registers, especially for applications in quantum metrology and quantum communication. Previous works on multiqubit electronic spin registers in the environment of a nitrogen-vacancy (NV) center in diamond have only included spins directly coupled to the NV. As this direct coupling is limited by the central spin coherence time, it significantly restricts the maximum attainable size of the register. To address this problem, we present a scalable approach to increase the size of electronic spin registers. Our approach exploits a weakly coupled probe spin together with double-resonance control sequences to mediate the transfer of spin polarization between the central NV spin and an environmental spin that is not directly coupled to it. We experimentally realize this approach to demonstrate the detection and coherent control of an unknown electronic spin outside the coherence limit of a central NV. Our work paves the way for engineering larger quantum spin registers with the potential to advance nanoscale sensing, enable correlated noise spectroscopy for error correction, and facilitate the realization of spin-chain quantum wires for quantum communication. Published by the American Physical Society 2024