Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Engineering in Diamond

Jeson Chen

Published Aug 6, 2015• 0 citations
OpenAlex

Abstract

Solid-state technologies for quantum mechanical application require delicate materials that can operate stably with a long coherence time. Nitrogen vacancy (NV) centers in diamond is one of the most promising candidates for quantum physics, with applications such as single photon emitters, quantum computation, and magnetic sensor.\n\nTo fully exploit the capability of defect centers in diamond for opto-electronics and quantum engineering, a number of improvements are needed. Among these are optimization of the NV centers yield in bulk diamond, nanodiamond (ND) size reduction, photocurrent study of the defect band-trap electronic structure in diamonds, and optimization of high-speed NV qubit control. For NV centers yield optimization, both the experimental magnetic sensitivity optimization as well as theoretical simulation of NV concentration are implemented. For NDs size characterization, we analyzed the size and photon autocorrelation function of NV in NDs after air oxidation treatment using a combined atomic force microscopy/confocal system. To study defect band-trap electronic structure in diamond, excitation and quenching as well as the recovery of the quenched photocurrent was investigated to better understand photocurrent dynamics in diamond. For qubit high-speed control optimization, a microwave pulse based on a nonlinear numeric solution of the Schrodinger equation is used to rotate the NV spin faster than the ordinary Rabi flip rate. Together these approaches promise to significantly speed up the development of diamond for quantum engineering applications.

Related papers

Quantum properties of NV centers in diamond: towards optimized industrial protocols

Léonard Desvignes, Ovidiu Brinza, Alexandre Tallaire +5 more

Because of their high sensitivity, quantum materials are extremely promising for new technologies. The main challenge lies in maintaining a sufficiently quantum coherence times for quantum computation or quantum sensing systems. NV centers in diamond which are point defects consisting of a substitutional nitrogen atom neighboring an atomic vacancy, where an electron pair can reside in a triplet state – are ideal candidates for the development of industrial-scale quantum systems. These spin states exhibit ms-long coherence times at room temperature and can be manipulated optically, hence opening interesting perspectives for sending magnetic fields with high sensitivity1.At HiQuTe Diamond, we take up the challenge of mastering the entire nitrogen-doped diamond production chain synthesized by Microwave Plasma-Assisted Chemical Vapor Deposition (MPACVD). We aim at creating affordable diamonds specially engineered to achieve long coherence times with high NV density and high doping uniformity. This quest require to overcome the impact of several external factors that contribute to electron spin decoherence. First, the chemical composition of the diamond, specifically the types and concentrations of impurities within the diamond matrix (such as substitutional nitrogen NS, NV centres, mono-vacancies and clusters, hydrogen, etc.), as well as their electrical charge states (NS⁰, NS⁺, NV⁰, NV⁻) should be carefully controlled. Thanks to extensive scientific research conducted over the past decade, combined with our own R&D efforts, we are now able to quantify these parameters using experimental techniques compatible with industrial applications (Raman and UV-Vis spectroscopy) and compare our results with key performance indicators2. Second, we study the relationship between coherence (T2*) and strain inhomogeneities in our diamond layers, which we analyse using birefringence measurements. Our findings demonstrate our capability to produce CVD diamond layers with reduced strain and extended defect and confirm that strain could be a critical limiting factor for T2*.In this poster, I will review the efforts carried out at HiQuTe Diamond to develop specific material that is well suited for quantum sensing applications.References1.Barry, J. F., Schloss, J. M., Bauch, E., Turner, M. J., Hart, C. A., Pham, L. M., & Walsworth, R. L. (2020). Sensitivity optimization for NV-diamond magnetometry. Reviews of Modern Physics, 92(1), 015004.2.Langer, J. (2022). Quantum-grade diamond for cavity-based solutions. Fraunhofer Verlag.

•Mar 19, 2025•0 citations

Creation of nitrogen-vacancy centers in chemical vapor deposition diamond for sensing applications

Tingpeng Luo, Lukas Lindner, J Langer +13 more

Abstract The nitrogen-vacancy (NV) center in diamond is a promising quantum system for magnetometry applications exhibiting optical readout of minute energy shifts in its spin sub-levels. Key material requirements for NV ensembles are a high NV − concentration, a long spin coherence time and a stable charge state. However, these are interdependent and can be difficult to optimize during diamond growth and subsequent NV creation. In this work, we systematically investigate the NV center formation and properties in bulk chemical vapor deposition (CVD) diamond. The nitrogen flow during growth is varied by over four orders of magnitude, resulting in a broad range of single substitutional nitrogen concentrations of 0.2–20 parts per million. For a fixed nitrogen concentration, we optimize electron-irradiation fluences with two different accelerated electron energies, and we study defect formation via optical characterizations. We discuss a general approach to determine the optimal irradiation conditions, for which an enhanced NV concentration and an optimum of NV charge states can both be satisfied. We achieve spin–spin coherence times T 2 ranging from 45.5 to 549 μ s for CVD diamonds containing 168 to 1 parts per billion NV − centers, respectively. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.

arXiv:2111.07981•New Journal of Physics•Feb 25, 2022•87 citations

Engineering colour centres in tailored diamond

Christian Osterkamp

When the word diamond comes up, the majority of people thinks about engagement rings or gemstones. In fact, it is additionally, one of the most promising host materials for the implementation of advanced technology, exploiting the nature of quantum physics. Such quantum technologies have disruptive potential, ones the quantum effects can be applied in macroscopic, commercial products. The nitrogen-vacancy (NV) centre in diamond is a promising candidate to perform such tasks in the fields of quantum computation, quantum cryptography or metrology. Especially in the field of quantum sensing, the NV sensor impresses with nano-scale spatial resolution paired with high sensitivity. The electronic spin of the atomic-sized point defect can be initialised, manipulated and read-out at ambient conditions and coherence lifetimes are comparably long. Diamond magnetometers based on negatively charged NV centres have shown to be very attractive, and the sensitivity goes down to the single-atom level. In order to exploit such a high sensitivity level for sensing prospects, in this thesis, the NV centres are fabricated well confined in a certain distance to the diamond surface, since the detectable field usually decays with the third power of the distance between sensor and target. The surface depicts a fracture of the spin wise protecting diamond lattice and charge fluctuations affect the stability of NV centres, which are overcome by diamond surface termination. In order to improve the sensitivity further, the sensor density, measurement contrast and interaction time are increased. The nitrogen doping technique, which is applied during a plasma-enhanced chemical vapour deposition (PECVD) diamond growth process is used to fabricate NV centre ensembles aligned along one diamond crystal axis, thereby improving the measurement contrast by a factor up to four. The interaction time limiting spin bath is analysed using the sensor capabilities of the NVs, which leads to enhanced growth strategies and the fabrication of sensitivity optimised NV centre ensembles for magnetometry applications.

•Jan 1, 2020•0 citations

The properties of nitrogen-vacancy centres in nanodiamond

Carlo Bradac

Diamond is unique. Whether mechanical, thermal, electrical or optical, its properties are within the most extreme compared to those of any other material. This, together with the fact that in the last fifty years the synthesis of artificial diamond has become a reality, makes it very attractive for engineering and technological purposes. The range of diamond-based applications is very diverse and, among the others, includes its use in mechanical machining, high-power high-frequency electronics and high transmissivity optics. -- Diamond is also host to a wide variety of crystallographic defects. Appropriately controlled, they can be used to tune the characteristics of the material, but even more interestingly they often possess attractive optical properties on their own. In particular, nitrogen-vacancy (NV) centres in diamond have been the subject of extensive study in the last few years. They possess unique room-temperature optical and spin properties which make them promising systems for solid-state qubits in quantum information technologies and for emerging applications in biotechnology, nanomedicine and high resolution magnetometry, such as drug delivery, fluorescent biomarking and spin imaging. -- This thesis is focused on NV centres in diamond. I first present an extensive review on diamond as a material, describing in detail its physical properties, the methods that have been developed to synthesise it and some of its possible applications. I then move the attention specifically to NV centres in nanodiamonds (NDs), i.e. diamond crystals in the nanometre size range (0-100 nm). They are a potential candidate for emerging technologies including high-resolution magnetometry and biomedical imaging. For these applications, specific material requirements, such as the small size of the diamond nanocrystals and the optical stability of the hosted NV centres, are crucial. The NV stability with respect to the nanodiamond size and surface is the central theme of this thesis. I analyse the optical behaviour of NV centres in nanodiamond while varying a number of key parameters such as size, surface termination and diamond origin. Based on the measurements, I conclude whether the nanodiamond size and the NV surface proximity are factors that must be taken into consideration in order to control the material and realise nanotechnologies based on NV centres in nanodiamonds.

•Aug 8, 2013•0 citations

Engineering of NV color centers in diamond for their applications in quantum information and magnetometry

Margarita Lesik

The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.

•Mar 3, 2015•4 citations

Coherent control of nitrogen-vacancy centers in diamond nanostructures for quantum sensing and networking

Edward H. Chen

The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.

•Jan 1, 2016•0 citations
Solid-state technologies for quantum mechanical application require delicate materials that can operate stably with a long coherence time. Nitrogen vacancy (NV) centers in diamond is one of the most promising candidates for quantum physics, with applications such as single photon emitters, quantum computation, and magnetic sensor.\n\nTo fully exploit the capability of defect centers in diamond for opto-electronics and quantum engineering, a number of improvements are needed. Among these are optimization of the NV centers yield in bulk diamond, nanodiamond (ND) size reduction, photocurrent study of the defect band-trap electronic structure in diamonds, and optimization of high-speed NV qubit control. For NV centers yield optimization, both the experimental magnetic sensitivity optimization as well as theoretical simulation of NV concentration are implemented. For NDs size characterization, we analyzed the size and photon autocorrelation function of NV in NDs after air oxidation treatment using a combined atomic force microscopy/confocal system. To study defect band-trap electronic structure in diamond, excitation and quenching as well as the recovery of the quenched photocurrent was investigated to better understand photocurrent dynamics in diamond. For qubit high-speed control optimization, a microwave pulse based on a nonlinear numeric solution of the Schrodinger equation is used to rotate the NV spin faster than the ordinary Rabi flip rate. Together these approaches promise to significantly speed up the development of diamond for quantum engineering applications.
Because of their high sensitivity, quantum materials are extremely promising for new technologies. The main challenge lies in maintaining a sufficiently quantum coherence times for quantum computation or quantum sensing systems. NV centers in diamond which are point defects consisting of a substitutional nitrogen atom neighboring an atomic vacancy, where an electron pair can reside in a triplet state – are ideal candidates for the development of industrial-scale quantum systems. These spin states exhibit ms-long coherence times at room temperature and can be manipulated optically, hence opening interesting perspectives for sending magnetic fields with high sensitivity1.At HiQuTe Diamond, we take up the challenge of mastering the entire nitrogen-doped diamond production chain synthesized by Microwave Plasma-Assisted Chemical Vapor Deposition (MPACVD). We aim at creating affordable diamonds specially engineered to achieve long coherence times with high NV density and high doping uniformity. This quest require to overcome the impact of several external factors that contribute to electron spin decoherence. First, the chemical composition of the diamond, specifically the types and concentrations of impurities within the diamond matrix (such as substitutional nitrogen NS, NV centres, mono-vacancies and clusters, hydrogen, etc.), as well as their electrical charge states (NS⁰, NS⁺, NV⁰, NV⁻) should be carefully controlled. Thanks to extensive scientific research conducted over the past decade, combined with our own R&D efforts, we are now able to quantify these parameters using experimental techniques compatible with industrial applications (Raman and UV-Vis spectroscopy) and compare our results with key performance indicators2. Second, we study the relationship between coherence (T2*) and strain inhomogeneities in our diamond layers, which we analyse using birefringence measurements. Our findings demonstrate our capability to produce CVD diamond layers with reduced strain and extended defect and confirm that strain could be a critical limiting factor for T2*.In this poster, I will review the efforts carried out at HiQuTe Diamond to develop specific material that is well suited for quantum sensing applications.References1.Barry, J. F., Schloss, J. M., Bauch, E., Turner, M. J., Hart, C. A., Pham, L. M., & Walsworth, R. L. (2020). Sensitivity optimization for NV-diamond magnetometry. Reviews of Modern Physics, 92(1), 015004.2.Langer, J. (2022). Quantum-grade diamond for cavity-based solutions. Fraunhofer Verlag.
Abstract The nitrogen-vacancy (NV) center in diamond is a promising quantum system for magnetometry applications exhibiting optical readout of minute energy shifts in its spin sub-levels. Key material requirements for NV ensembles are a high NV − concentration, a long spin coherence time and a stable charge state. However, these are interdependent and can be difficult to optimize during diamond growth and subsequent NV creation. In this work, we systematically investigate the NV center formation and properties in bulk chemical vapor deposition (CVD) diamond. The nitrogen flow during growth is varied by over four orders of magnitude, resulting in a broad range of single substitutional nitrogen concentrations of 0.2–20 parts per million. For a fixed nitrogen concentration, we optimize electron-irradiation fluences with two different accelerated electron energies, and we study defect formation via optical characterizations. We discuss a general approach to determine the optimal irradiation conditions, for which an enhanced NV concentration and an optimum of NV charge states can both be satisfied. We achieve spin–spin coherence times T 2 ranging from 45.5 to 549 μ s for CVD diamonds containing 168 to 1 parts per billion NV − centers, respectively. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.
When the word diamond comes up, the majority of people thinks about engagement rings or gemstones. In fact, it is additionally, one of the most promising host materials for the implementation of advanced technology, exploiting the nature of quantum physics. Such quantum technologies have disruptive potential, ones the quantum effects can be applied in macroscopic, commercial products. The nitrogen-vacancy (NV) centre in diamond is a promising candidate to perform such tasks in the fields of quantum computation, quantum cryptography or metrology. Especially in the field of quantum sensing, the NV sensor impresses with nano-scale spatial resolution paired with high sensitivity. The electronic spin of the atomic-sized point defect can be initialised, manipulated and read-out at ambient conditions and coherence lifetimes are comparably long. Diamond magnetometers based on negatively charged NV centres have shown to be very attractive, and the sensitivity goes down to the single-atom level. In order to exploit such a high sensitivity level for sensing prospects, in this thesis, the NV centres are fabricated well confined in a certain distance to the diamond surface, since the detectable field usually decays with the third power of the distance between sensor and target. The surface depicts a fracture of the spin wise protecting diamond lattice and charge fluctuations affect the stability of NV centres, which are overcome by diamond surface termination. In order to improve the sensitivity further, the sensor density, measurement contrast and interaction time are increased. The nitrogen doping technique, which is applied during a plasma-enhanced chemical vapour deposition (PECVD) diamond growth process is used to fabricate NV centre ensembles aligned along one diamond crystal axis, thereby improving the measurement contrast by a factor up to four. The interaction time limiting spin bath is analysed using the sensor capabilities of the NVs, which leads to enhanced growth strategies and the fabrication of sensitivity optimised NV centre ensembles for magnetometry applications.
Diamond is unique. Whether mechanical, thermal, electrical or optical, its properties are within the most extreme compared to those of any other material. This, together with the fact that in the last fifty years the synthesis of artificial diamond has become a reality, makes it very attractive for engineering and technological purposes. The range of diamond-based applications is very diverse and, among the others, includes its use in mechanical machining, high-power high-frequency electronics and high transmissivity optics. -- Diamond is also host to a wide variety of crystallographic defects. Appropriately controlled, they can be used to tune the characteristics of the material, but even more interestingly they often possess attractive optical properties on their own. In particular, nitrogen-vacancy (NV) centres in diamond have been the subject of extensive study in the last few years. They possess unique room-temperature optical and spin properties which make them promising systems for solid-state qubits in quantum information technologies and for emerging applications in biotechnology, nanomedicine and high resolution magnetometry, such as drug delivery, fluorescent biomarking and spin imaging. -- This thesis is focused on NV centres in diamond. I first present an extensive review on diamond as a material, describing in detail its physical properties, the methods that have been developed to synthesise it and some of its possible applications. I then move the attention specifically to NV centres in nanodiamonds (NDs), i.e. diamond crystals in the nanometre size range (0-100 nm). They are a potential candidate for emerging technologies including high-resolution magnetometry and biomedical imaging. For these applications, specific material requirements, such as the small size of the diamond nanocrystals and the optical stability of the hosted NV centres, are crucial. The NV stability with respect to the nanodiamond size and surface is the central theme of this thesis. I analyse the optical behaviour of NV centres in nanodiamond while varying a number of key parameters such as size, surface termination and diamond origin. Based on the measurements, I conclude whether the nanodiamond size and the NV surface proximity are factors that must be taken into consideration in order to control the material and realise nanotechnologies based on NV centres in nanodiamonds.
The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.
The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.