Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.05804 · Physical Review Applied

Optically accessible high-finesse millimeter-wave resonator for cavity quantum electrodynamics with atom arrays

Tony Zhang, Michelle Wu, Sam R. Cohen, Lin Xin, Debadri Das, Kevin Multani, Nolan Peard, Anne-Marie Valente-Feliciano, Paul B. Welander, Amir H. Safavi‐Naeini, Emilio Alessandro Nanni, Monika Schleier-Smith

Published Aug 28, 2025• 9 citations
arXivHTMLPDF

Abstract

Cavity quantum electrodynamics (QED) is a powerful tool in quantum science, enabling preparation of nonclassical states of light and scalable entanglement of many atoms coupled to a single field mode. While the most coherent atom-photon interactions have been achieved using superconducting millimeter-wave cavities coupled to Rydberg atoms, these platforms so far lack the optical access required for trapping and addressing individual atomic qubits. We present a millimeter-wave Fabry-Pérot cavity with finesse 5.8 ( 1 ) × 10 7 at a temperature of 1 K providing generous transverse optical access (numerical aperture 0.56). Conflicting goals of strong atom-photon coupling and optical access motivate a near-confocal geometry. Close to confocality, however, postparaxial corrections to the cavity spectrum introduce unexpected degeneracies between transverse modes, leading to excess cavity loss. Modeling these corrections allows for tuning the cavity geometry to evade this loss, producing a high finesse that will enable cavity QED experiments with trapped atoms deep in the strong coupling regime.

DOI
10.1103/4b8v-qdcj

Related papers

A tunable high-Q millimeter wave cavity for hybrid circuit and cavity QED experiments

Aziza Suleymanzade, Alexander Anferov, Mark Stone +4 more

The millimeter wave (mm-wave) frequency band provides exciting prospects for quantum science and devices since many high-fidelity quantum emitters, including Rydberg atoms, molecules, and silicon vacancies, exhibit resonances near 100 GHz. High-Q resonators at these frequencies would give access to strong interactions between emitters and single photons, leading to rich and unexplored quantum phenomena at temperatures above 1 K. We report a 3D mm-wave cavity with a measured single-photon internal quality factor of 3×107 and mode volume of 0.14×λ3 at 98.2 GHz, sufficient to reach strong coupling in a Rydberg cavity quantum electrodynamics system. An in situ piezotunability of 18 MHz facilitates coupling to specific atomic transitions. Our unique, seamless, and optically accessible resonator design is enabled by the realization that intersections of 3D waveguides support tightly confined bound states below the waveguide cutoff frequency. Harnessing the features of our cavity design, we realize a hybrid mm-wave and optical cavity, designed for interconversion and entanglement of mm-wave and optical photons using Rydberg atoms.

arXiv:1911.00553•Applied Physics Letters•Mar 9, 2020•30 citations

Controlling Atom Array in an Ultra-high-cooperativity Optical Cavity

Jilai Ye, Zhihao Chi, Ye Tian +7 more

Neutral-atom array and cavity quantum electrodynamics offer complementary strengths for quantum science: scalable, reconfigurable qubit architectures and strong coherent light-matter coupling. Combining them in a single platform requires an optical cavity with simultaneously high cooperativity, sufficient mode volume to accommodate atom array, and ample side optical access for atom trapping, imaging, cooling, and rearrangement, a combination that is challenging to achieve. Here we realize an atomic array integrated with a millimeter-scale Fabry--Pérot cavity whose optically-characterized single-atom cooperativity reaches $η_{\mathrm{cav}}=125\pm13$. Atom-cavity transmission spectra of trapped atoms yield an effective spectroscopic cooperativity $η_{\mathrm{spec}}=106\pm 3$, providing an in-situ verification of strong coupling in the integrated platform. In this integrated system, we achieve a state-measurement fidelity of $99.925^{+15}_{-18}\%$ for a single atom with a 4-$μ$s readout time. We also demonstrate simultaneous coupling of up to 21 individually trapped atoms to the antinode of the cavity mode. The key technical advance is a two-step mirror-fabrication method combining precision mechanical shaping and carbon-dioxide laser polishing, which produces concave fused-silica mirrors with sub-millimeter radii of curvature and residual roughness below $2~Å$. Our results establish a regime of cavity-integrated atomic array that simultaneously provides high cooperativity, large mode volume, and flexible manipulation of individual atoms, opening opportunities for cavity-assisted quantum state readout and long-range entanglement-engineering in atom-array platforms.

quant-pharXiv:2607.04090•Jul 7, 2026•6 citations

Single atoms on demand for cavity QED experiments

I. Dotsenko

Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.

•Jan 1, 2007•6 citations

Cavity Microscope for Micrometer-Scale Control of Atom-Photon Interactions

Francesca Orsi, Nick Sauerwein, Rohit Prasad Bhatt +5 more

Cavity quantum electrodynamics offers the possibility of observing and controlling the motion of a few or individual atoms, enabling the realization of various quantum technological tasks such as quantum enhanced metrology or quantum simulation of strongly correlated matter. A core limitation of these experiments lies in the mode structure of the cavity field, which is hard coded in the shape and geometry of the mirrors. As a result, most applications of cavity QED trade spatial resolution for enhanced sensitivity. Here, we propose and demonstrate a cavity-microscope device capable of controlling in space and time the coupling between atoms and light in a single-mode high-finesse cavity, reaching a spatial resolution an order of magnitude lower than the cavity-mode waist. This is achieved through local Floquet engineering of the atomic level structure, imprinting a corresponding atom-field coupling. We illustrate this capability by engineering micrometer-scale coupling, using cavity-assisted atomic measurements and optimization. Our system forms an optical device with a single optical axis, has the same footprint and complexity as a standard Fabry-Perot cavity or confocal lens pair, and can be used for any atomic species. This technique opens a wide range of perspectives, from ultrafast cavity-enhanced midcircuit readout to the quantum simulation of fully connected models of quantum matter such as the Sachdev-Ye-Kitaev model. Published by the American Physical Society 2024

arXiv:2405.03550•PRX Quantum•Dec 2, 2024•16 citations

High finesse bow-tie cavity for strong atom-photon coupling in Rydberg arrays

Yu-Ting Chen, Michał Szurek, Beili Hu +3 more

We report a high-finesse bow-tie cavity designed for atomic physics experiments with Rydberg atom arrays. The cavity has a finesse of 51,000 and a waist of 7.1 μm at the cesium D2 line (852 nm). With these parameters, the cavity is expected to induce strong coupling between a single atom and a single photon, corresponding to a cooperativity per traveling mode of 35 at the cavity waist. To trap and image atoms, the cavity setup utilizes two in-vacuum aspheric lenses with a numerical aperture (NA) of 0.35 and is capable of housing NA = 0.5 microscope objectives. In addition, the large atom-mirror distance (≳1.5 cm) provides good optical access and minimizes stray electric fields at the position of the atoms. This cavity setup can operate in tandem with a Rydberg array platform, creating a fully connected system for quantum simulation and computation.

arXiv:2207.06876•Optics Express•Sep 19, 2022•20 citations

Cavity QED in a high NA resonator

Danial Shadmany, Aishwarya Kumar, Anna Soper +8 more

From fundamental studies of light-matter interaction to applications in quantum networking and sensing, cavity quantum electrodynamics (QED) provides a toolbox to control interactions between atoms and photons. The coherence of interactions is determined by the single-pass atomic absorption and number of photon round-trips. Reducing the cavity loss has enabled resonators supporting 1 million roundtrips but with limited material choices and increased alignment sensitivity. Here, we present a high–numerical aperture, lens-based resonator that pushes the single-atom single-photon absorption probability near its fundamental limit, reducing the mode size at the atom to order λ. This resonator provides a single-atom cooperativity of 1.6 in a cavity where the light circulates ∼10 times. We load single 87 Rb atoms into this cavity, observe strong coupling, and demonstrate cavity-enhanced atom detection with fidelity of 99.55(6)% and survival of 99.89(4)% in 130 μs. Introducing intracavity imaging systems will enable cavity arrays compatible with Rydberg atom array computing technologies, expanding the applicability of the cavity QED toolbox.

arXiv:2407.04784•Science Advances•Feb 26, 2025•26 citations
Cavity quantum electrodynamics (QED) is a powerful tool in quantum science, enabling preparation of nonclassical states of light and scalable entanglement of many atoms coupled to a single field mode. While the most coherent atom-photon interactions have been achieved using superconducting millimeter-wave cavities coupled to Rydberg atoms, these platforms so far lack the optical access required for trapping and addressing individual atomic qubits. We present a millimeter-wave Fabry-Pérot cavity with finesse 5.8 ( 1 ) × 10 7 at a temperature of 1 K providing generous transverse optical access (numerical aperture 0.56). Conflicting goals of strong atom-photon coupling and optical access motivate a near-confocal geometry. Close to confocality, however, postparaxial corrections to the cavity spectrum introduce unexpected degeneracies between transverse modes, leading to excess cavity loss. Modeling these corrections allows for tuning the cavity geometry to evade this loss, producing a high finesse that will enable cavity QED experiments with trapped atoms deep in the strong coupling regime.
The millimeter wave (mm-wave) frequency band provides exciting prospects for quantum science and devices since many high-fidelity quantum emitters, including Rydberg atoms, molecules, and silicon vacancies, exhibit resonances near 100 GHz. High-Q resonators at these frequencies would give access to strong interactions between emitters and single photons, leading to rich and unexplored quantum phenomena at temperatures above 1 K. We report a 3D mm-wave cavity with a measured single-photon internal quality factor of 3×107 and mode volume of 0.14×λ3 at 98.2 GHz, sufficient to reach strong coupling in a Rydberg cavity quantum electrodynamics system. An in situ piezotunability of 18 MHz facilitates coupling to specific atomic transitions. Our unique, seamless, and optically accessible resonator design is enabled by the realization that intersections of 3D waveguides support tightly confined bound states below the waveguide cutoff frequency. Harnessing the features of our cavity design, we realize a hybrid mm-wave and optical cavity, designed for interconversion and entanglement of mm-wave and optical photons using Rydberg atoms.
Neutral-atom array and cavity quantum electrodynamics offer complementary strengths for quantum science: scalable, reconfigurable qubit architectures and strong coherent light-matter coupling. Combining them in a single platform requires an optical cavity with simultaneously high cooperativity, sufficient mode volume to accommodate atom array, and ample side optical access for atom trapping, imaging, cooling, and rearrangement, a combination that is challenging to achieve. Here we realize an atomic array integrated with a millimeter-scale Fabry--Pérot cavity whose optically-characterized single-atom cooperativity reaches ηcav=125±13η_{\mathrm{cav}}=125\pm13ηcav​=125±13. Atom-cavity transmission spectra of trapped atoms yield an effective spectroscopic cooperativity ηspec=106±3η_{\mathrm{spec}}=106\pm 3ηspec​=106±3, providing an in-situ verification of strong coupling in the integrated platform. In this integrated system, we achieve a state-measurement fidelity of 99.925−18+15%99.925^{+15}_{-18}\%99.925−18+15​% for a single atom with a 4-μμμs readout time. We also demonstrate simultaneous coupling of up to 21 individually trapped atoms to the antinode of the cavity mode. The key technical advance is a two-step mirror-fabrication method combining precision mechanical shaping and carbon-dioxide laser polishing, which produces concave fused-silica mirrors with sub-millimeter radii of curvature and residual roughness below 2 A˚2~Å2 A˚. Our results establish a regime of cavity-integrated atomic array that simultaneously provides high cooperativity, large mode volume, and flexible manipulation of individual atoms, opening opportunities for cavity-assisted quantum state readout and long-range entanglement-engineering in atom-array platforms.
Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.
Cavity quantum electrodynamics offers the possibility of observing and controlling the motion of a few or individual atoms, enabling the realization of various quantum technological tasks such as quantum enhanced metrology or quantum simulation of strongly correlated matter. A core limitation of these experiments lies in the mode structure of the cavity field, which is hard coded in the shape and geometry of the mirrors. As a result, most applications of cavity QED trade spatial resolution for enhanced sensitivity. Here, we propose and demonstrate a cavity-microscope device capable of controlling in space and time the coupling between atoms and light in a single-mode high-finesse cavity, reaching a spatial resolution an order of magnitude lower than the cavity-mode waist. This is achieved through local Floquet engineering of the atomic level structure, imprinting a corresponding atom-field coupling. We illustrate this capability by engineering micrometer-scale coupling, using cavity-assisted atomic measurements and optimization. Our system forms an optical device with a single optical axis, has the same footprint and complexity as a standard Fabry-Perot cavity or confocal lens pair, and can be used for any atomic species. This technique opens a wide range of perspectives, from ultrafast cavity-enhanced midcircuit readout to the quantum simulation of fully connected models of quantum matter such as the Sachdev-Ye-Kitaev model. Published by the American Physical Society 2024
We report a high-finesse bow-tie cavity designed for atomic physics experiments with Rydberg atom arrays. The cavity has a finesse of 51,000 and a waist of 7.1 μm at the cesium D2 line (852 nm). With these parameters, the cavity is expected to induce strong coupling between a single atom and a single photon, corresponding to a cooperativity per traveling mode of 35 at the cavity waist. To trap and image atoms, the cavity setup utilizes two in-vacuum aspheric lenses with a numerical aperture (NA) of 0.35 and is capable of housing NA = 0.5 microscope objectives. In addition, the large atom-mirror distance (≳1.5 cm) provides good optical access and minimizes stray electric fields at the position of the atoms. This cavity setup can operate in tandem with a Rydberg array platform, creating a fully connected system for quantum simulation and computation.
From fundamental studies of light-matter interaction to applications in quantum networking and sensing, cavity quantum electrodynamics (QED) provides a toolbox to control interactions between atoms and photons. The coherence of interactions is determined by the single-pass atomic absorption and number of photon round-trips. Reducing the cavity loss has enabled resonators supporting 1 million roundtrips but with limited material choices and increased alignment sensitivity. Here, we present a high–numerical aperture, lens-based resonator that pushes the single-atom single-photon absorption probability near its fundamental limit, reducing the mode size at the atom to order λ. This resonator provides a single-atom cooperativity of 1.6 in a cavity where the light circulates ∼10 times. We load single 87 Rb atoms into this cavity, observe strong coupling, and demonstrate cavity-enhanced atom detection with fidelity of 99.55(6)% and survival of 99.89(4)% in 130 μs. Introducing intracavity imaging systems will enable cavity arrays compatible with Rydberg atom array computing technologies, expanding the applicability of the cavity QED toolbox.