Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1911.00553 · Applied Physics Letters

A tunable high-Q millimeter wave cavity for hybrid circuit and cavity QED experiments

Aziza Suleymanzade, Alexander Anferov, Mark Stone, Ravi Naik, Andrew Oriani, Jonathan Simon, David Schuster

Published Mar 9, 2020• 30 citations
arXivHTMLPDF

Abstract

The millimeter wave (mm-wave) frequency band provides exciting prospects for quantum science and devices since many high-fidelity quantum emitters, including Rydberg atoms, molecules, and silicon vacancies, exhibit resonances near 100 GHz. High-Q resonators at these frequencies would give access to strong interactions between emitters and single photons, leading to rich and unexplored quantum phenomena at temperatures above 1 K. We report a 3D mm-wave cavity with a measured single-photon internal quality factor of 3×107 and mode volume of 0.14×λ3 at 98.2 GHz, sufficient to reach strong coupling in a Rydberg cavity quantum electrodynamics system. An in situ piezotunability of 18 MHz facilitates coupling to specific atomic transitions. Our unique, seamless, and optically accessible resonator design is enabled by the realization that intersections of 3D waveguides support tightly confined bound states below the waveguide cutoff frequency. Harnessing the features of our cavity design, we realize a hybrid mm-wave and optical cavity, designed for interconversion and entanglement of mm-wave and optical photons using Rydberg atoms.

DOI
10.1063/1.5137900

Related papers

Optically accessible high-finesse millimeter-wave resonator for cavity quantum electrodynamics with atom arrays

Tony Zhang, Michelle Wu, Sam R. Cohen +9 more

Cavity quantum electrodynamics (QED) is a powerful tool in quantum science, enabling preparation of nonclassical states of light and scalable entanglement of many atoms coupled to a single field mode. While the most coherent atom-photon interactions have been achieved using superconducting millimeter-wave cavities coupled to Rydberg atoms, these platforms so far lack the optical access required for trapping and addressing individual atomic qubits. We present a millimeter-wave Fabry-Pérot cavity with finesse 5.8 ( 1 ) × 10 7 at a temperature of 1 K providing generous transverse optical access (numerical aperture 0.56). Conflicting goals of strong atom-photon coupling and optical access motivate a near-confocal geometry. Close to confocality, however, postparaxial corrections to the cavity spectrum introduce unexpected degeneracies between transverse modes, leading to excess cavity loss. Modeling these corrections allows for tuning the cavity geometry to evade this loss, producing a high finesse that will enable cavity QED experiments with trapped atoms deep in the strong coupling regime.

arXiv:2506.05804•Physical Review Applied•Aug 28, 2025•9 citations

Millimeter Wave Readout of a Superconducting Qubit

Akash V. Dixit, Zachary L. Parrott, Dennis Chunikhin +3 more

Millimeter waves are emerging as an enabling technology for connecting and enhancing different quantum platforms such as Rydberg atoms, optomechanics, and superconducting qubits. In this work, we explore the interaction between millimeter wave photons and conventional transmon qubits, specifically for qubit readout. We study a circuit quantum electrodynamic (cQED) system consisting of a millimeter wave cavity at $ω_r = 2π\times 34.7$ GHz and a transmon qubit at $ω_q = 2π\times 3.1$ GHz coupled at rate $g = 2π\times 1.3$. With such a large detuning between cavity and qubit, $ω_r/ω_q > 10$, we are able to suppress drive induced unwanted resonant state transitions, enabling strong drives for qubit readout. We measure no resonant state transitions even when driving with more than $100$ photons and read out the qubit state with more than $100$ photons to achieve a measurement fidelity greater than $99\%$ without the aid of a quantum limited amplifier.

quant-pharXiv:2603.13837•Physical Review Letters•Mar 17, 2026•4 citations

Millimeter-wave resonator and associated methods

David Schuster, Aziza Suleymanzade, Jonathan Simon +1 more

A millimeter-wave resonator is produced by drilling a plurality of holes into a piece of metal. Each hole forms an evanescent tube having a lowest cutoff frequency. The holes spatially intersect to form a seamless three-dimensional cavity whose fundamental cavity mode has a resonant frequency that is less than the cutoff frequencies of all the evanescent tubes. Below cutoff, the fundamental cavity mode does not couple to the waveguide modes, and therefore has a high internal Q. Millimeter waves can be coupled into any of the tubes to excite an evanescent mode that couples to the fundamental cavity mode. The tubes also provide spatial and optical access for transporting atoms into the cavity, where they can be trapped while spatially overlapping the fundamental cavity mode. The piece of metal may be superconducting, allowing the resonator to be used in a cryogenic environment for quantum computing and information processing.

•Oct 28, 2021•0 citations

Millimeter-Wave Resonator and Associated Methods

David Schuster, Aziza Suleymanzade, Jonathan Simon +1 more

A millimeter-wave resonator is produced by drilling a plurality of holes into a piece of metal. Each hole forms an evanescent tube having a lowest cutoff frequency. The holes spatially intersect to form a seamless three-dimensional cavity whose fundamental cavity mode has a resonant frequency that is less than the cutoff frequencies of all the evanescent tubes. Below cutoff, the fundamental cavity mode does not couple to the waveguide modes, and therefore has a high internal Q. Millimeter waves can be coupled into any of the tubes to excite an evanescent mode that couples to the fundamental cavity mode. The tubes also provide spatial and optical access for transporting atoms into the cavity, where they can be trapped while spatially overlapping the fundamental cavity mode. The piece of metal may be superconducting, allowing the resonator to be used in a cryogenic environment for quantum computing and information processing.

•Oct 28, 2021•0 citations

Focus section on Cavity QED

Wolfgang Lange, Jean‐Michel Gérard

A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.

Journal of Optics B Quantum and Semiclassical Optics•Feb 1, 2004•0 citations

Cavity Quantum Electrodynamics

The study of atoms and photons interacting in a confined space defined by mirrors, so-called “cavity quantum electrodynamics” (cavity QED), has been and continues to be of great interest both theoretically and experimentally (Haroche, 2013; Haroche et al ., 2020; Purcell et al ., 1946; Walther et al ., 2006). This interest was sparked by the realization that surrounding an atom with a cavity with no modes at the transition frequency could inhibit spontaneous emission. The field has since evolved to include modifications of the atomic energy levels and the oscillatory energy exchange between atoms and a cavity, leading to the creation of the “singleatom” maser, or micromaser. Cavity QED has proven itself a valuable platform for studying a variety of fundamental quantum effects, for example, superposition and entanglement, complementarity, and decoherence. Whereas much of the same physics can be studied in mesoscopic superconducting circuits, the focus here is on cavity QED experiments that employ Rydberg states. Several characteristics of Rydberg atoms point to their application in studies of atom–radiation coupling. They couple strongly to radiation fields and have long lifetimes against spontaneous decay. Their transitions lie in the millimeter-wave portion of the spectrum, allowing for the physical realization of low-order cavities whose size also permits reasonably long interaction times as the atoms pass through them.

WORLD SCIENTIFIC (EUROPE) eBooks•Sep 10, 2018•34 citations
The millimeter wave (mm-wave) frequency band provides exciting prospects for quantum science and devices since many high-fidelity quantum emitters, including Rydberg atoms, molecules, and silicon vacancies, exhibit resonances near 100 GHz. High-Q resonators at these frequencies would give access to strong interactions between emitters and single photons, leading to rich and unexplored quantum phenomena at temperatures above 1 K. We report a 3D mm-wave cavity with a measured single-photon internal quality factor of 3×107 and mode volume of 0.14×λ3 at 98.2 GHz, sufficient to reach strong coupling in a Rydberg cavity quantum electrodynamics system. An in situ piezotunability of 18 MHz facilitates coupling to specific atomic transitions. Our unique, seamless, and optically accessible resonator design is enabled by the realization that intersections of 3D waveguides support tightly confined bound states below the waveguide cutoff frequency. Harnessing the features of our cavity design, we realize a hybrid mm-wave and optical cavity, designed for interconversion and entanglement of mm-wave and optical photons using Rydberg atoms.
Cavity quantum electrodynamics (QED) is a powerful tool in quantum science, enabling preparation of nonclassical states of light and scalable entanglement of many atoms coupled to a single field mode. While the most coherent atom-photon interactions have been achieved using superconducting millimeter-wave cavities coupled to Rydberg atoms, these platforms so far lack the optical access required for trapping and addressing individual atomic qubits. We present a millimeter-wave Fabry-Pérot cavity with finesse 5.8 ( 1 ) × 10 7 at a temperature of 1 K providing generous transverse optical access (numerical aperture 0.56). Conflicting goals of strong atom-photon coupling and optical access motivate a near-confocal geometry. Close to confocality, however, postparaxial corrections to the cavity spectrum introduce unexpected degeneracies between transverse modes, leading to excess cavity loss. Modeling these corrections allows for tuning the cavity geometry to evade this loss, producing a high finesse that will enable cavity QED experiments with trapped atoms deep in the strong coupling regime.
Millimeter waves are emerging as an enabling technology for connecting and enhancing different quantum platforms such as Rydberg atoms, optomechanics, and superconducting qubits. In this work, we explore the interaction between millimeter wave photons and conventional transmon qubits, specifically for qubit readout. We study a circuit quantum electrodynamic (cQED) system consisting of a millimeter wave cavity at ωr=2π×34.7ω_r = 2π\times 34.7ωr​=2π×34.7 GHz and a transmon qubit at ωq=2π×3.1ω_q = 2π\times 3.1ωq​=2π×3.1 GHz coupled at rate g=2π×1.3g = 2π\times 1.3g=2π×1.3. With such a large detuning between cavity and qubit, ωr/ωq>10ω_r/ω_q > 10ωr​/ωq​>10, we are able to suppress drive induced unwanted resonant state transitions, enabling strong drives for qubit readout. We measure no resonant state transitions even when driving with more than 100100100 photons and read out the qubit state with more than 100100100 photons to achieve a measurement fidelity greater than 99%99\%99% without the aid of a quantum limited amplifier.
A millimeter-wave resonator is produced by drilling a plurality of holes into a piece of metal. Each hole forms an evanescent tube having a lowest cutoff frequency. The holes spatially intersect to form a seamless three-dimensional cavity whose fundamental cavity mode has a resonant frequency that is less than the cutoff frequencies of all the evanescent tubes. Below cutoff, the fundamental cavity mode does not couple to the waveguide modes, and therefore has a high internal Q. Millimeter waves can be coupled into any of the tubes to excite an evanescent mode that couples to the fundamental cavity mode. The tubes also provide spatial and optical access for transporting atoms into the cavity, where they can be trapped while spatially overlapping the fundamental cavity mode. The piece of metal may be superconducting, allowing the resonator to be used in a cryogenic environment for quantum computing and information processing.
A millimeter-wave resonator is produced by drilling a plurality of holes into a piece of metal. Each hole forms an evanescent tube having a lowest cutoff frequency. The holes spatially intersect to form a seamless three-dimensional cavity whose fundamental cavity mode has a resonant frequency that is less than the cutoff frequencies of all the evanescent tubes. Below cutoff, the fundamental cavity mode does not couple to the waveguide modes, and therefore has a high internal Q. Millimeter waves can be coupled into any of the tubes to excite an evanescent mode that couples to the fundamental cavity mode. The tubes also provide spatial and optical access for transporting atoms into the cavity, where they can be trapped while spatially overlapping the fundamental cavity mode. The piece of metal may be superconducting, allowing the resonator to be used in a cryogenic environment for quantum computing and information processing.
A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.
The study of atoms and photons interacting in a confined space defined by mirrors, so-called “cavity quantum electrodynamics” (cavity QED), has been and continues to be of great interest both theoretically and experimentally (Haroche, 2013; Haroche et al ., 2020; Purcell et al ., 1946; Walther et al ., 2006). This interest was sparked by the realization that surrounding an atom with a cavity with no modes at the transition frequency could inhibit spontaneous emission. The field has since evolved to include modifications of the atomic energy levels and the oscillatory energy exchange between atoms and a cavity, leading to the creation of the “singleatom” maser, or micromaser. Cavity QED has proven itself a valuable platform for studying a variety of fundamental quantum effects, for example, superposition and entanglement, complementarity, and decoherence. Whereas much of the same physics can be studied in mesoscopic superconducting circuits, the focus here is on cavity QED experiments that employ Rydberg states. Several characteristics of Rydberg atoms point to their application in studies of atom–radiation coupling. They couple strongly to radiation fields and have long lifetimes against spontaneous decay. Their transitions lie in the millimeter-wave portion of the spectrum, allowing for the physical realization of low-order cavities whose size also permits reasonably long interaction times as the atoms pass through them.