Abstract Harnessing the potential of quantum sensors to assist in navigation requires enabling their operation in complex, dynamic environments and integrating them within existing navigation systems. While cross-couplings from platform dynamics generally degrade quantum measurements in a complex manner, navigation filters would need to be designed to handle such complex quantum sensor data. In this work, we report on the realization of a high-fidelity model of an atom-interferometry-based gravity gradiometer and demonstrate its integration with a map-matching navigation filter. Relying on the ability of our model to simulate the sensor behaviour across various dynamic platform environments, we show that aiding navigation via map matching using quantum gravity gradiometry results in stable trajectories, and highlight the importance of non-Gaussian errors arising from platform dynamics as a key challenge to map-matching navigation. We derive requirements for mitigating these errors, such as maintaining sensor tilt below 3.3∘, to inform future sensor development priorities. This work demonstrates the value of an end-to-end approach that could support future optimization of the overall navigation system. Beyond navigation, our atom interferometer modelling framework could be relevant to current research and innovation endeavours with quantum gravimeters, gradiometers and inertial sensors.
Abstract Harnessing the potential of quantum sensors to assist in navigation requires enabling their operation in complex, dynamic environments and integrating them within existing navigation systems. While cross-couplings from platform dynamics generally degrade quantum measurements in a complex manner, navigation filters would need to be designed to handle such complex quantum sensor data. In this work, we report on the realization of a high-fidelity model of an atom-interferometry-based gravity gradiometer and demonstrate its integration with a map-matching navigation filter. Relying on the ability of our model to simulate the sensor behaviour across various dynamic platform environments, we show that aiding navigation via map matching using quantum gravity gradiometry results in stable trajectories, and highlight the importance of non-Gaussian errors arising from platform dynamics as a key challenge to map-matching navigation. We derive requirements for mitigating these errors, such as maintaining sensor tilt below 3.3∘, to inform future sensor development priorities. This work demonstrates the value of an end-to-end approach that could support future optimization of the overall navigation system. Beyond navigation, our atom interferometer modelling framework could be relevant to current research and innovation endeavours with quantum gravimeters, gradiometers and inertial sensors.
Abstract The inherent vulnerability of Global Navigation Satellite Systems (GNSS) to interference, spoofing, and signal degradation highlights the urgent need for robust augmentation and alternative solutions to support resilient Positioning, Navigation, and Timing (PNT) services. Among emerging technologies, quantum sensing stands out for its ability to harness fundamental quantum phenomena, such as superposition and entanglement, enabling absolute, drift-free and ultra-sensitive measurements of inertial forces, gravity, and magnetic fields with long-term stability and reduced dependency on external signals. This capability offers a promising pathway to enhance positioning and navigation performance in GNSS-denied or GNSS-contested environments. Here, we present a comprehensive review of quantum sensing technologies in the context of positioning and navigation, including cold atom interferometry, atomic vapour cell, superconducting quantum interference devices, and room temperature solid-state systems like nitrogen-vacancy centres in diamond, and their potential to support positioning and navigation across a range of operational contexts. Both standalone and hybrid quantum-classical architectures are examined, with case studies illustrating their ability to reduce navigation drift and achieve sub-metre accuracy through quantum-enhanced inertial navigation, gravity-aided positioning, and magnetic field-matching approach. Despite their promise, challenges including decoherence, environmental robustness, miniaturisation, and integration complexity remain significant barriers to practical deployment. Rather than replacing existing classical systems, quantum sensors are best served as complementary solutions within multi-layered PNT frameworks. This review also identifies priorities for advancing field-deployable quantum positioning and navigation solutions, including sensor robustness, miniaturisation, seamless integration, and the development of protocols to quantify quantum performance. Aligned with international quantum initiatives, this work contributes to the vision of secure, interference-resistant navigation infrastructure for scientific, industrial, and defence applications.
Global navigation satellite systems (GNSS) are often disrupted or unavailable at sea, and unaided inertial navigation systems (INS) drift without correction. Quantum-sensing-based gravity map matching offers a passive, infrastructure-free aid, but field demonstrations of GNSS-free quantum gravimetric navigation have not been reported. Here we perform gravity map matching and fine-resolution gravity survey with a mobile quantum gravimeter aboard a 29 m surface vessel. We hybridize an atomic sensor with a classical accelerometer for bias stabilization and independently mechanize a navigation-grade IMU, all installed in an uncontrolled cabin with no environmental stabilization or calibration. Operated in both gimbaled and strapdown configurations over identical traversals, the hybrid sensor corrected the inertial solution over an 83 km maritime trajectory by referencing locally measured gravity to a satellite-derived anomaly map. Gravity-aiding constrains INS drift and delivers bounded positioning at nautical-mile-level accuracy, with GNSS excluded throughout the measurement chain. In a separate GNSS-referenced mode, the same system surveyed coastal routes up to Sea State 4, achieving mGal-level agreement with gravimetric maps and sub-mGal repeatability and stability, with gimbaled and strapdown operation performing comparably. Resolved anomalies reach an along-track scale of ~300 m, 50X finer than the satellite map's half-power wavelength. A 56 h stationary test shows atom referencing lowers long-term drift ~70X versus the classical channel alone. These results provide the first same-instrument comparison of gimbaled and strapdown mobile quantum gravimetry and the first fully GNSS-independent gravity-map-matching navigation demonstration using a quantum gravimeter, pointing toward compact, autonomous-platform-ready quantum sensing for GNSS-denied maritime navigation and survey.
Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.
Modern developments have led to a breakthrough in quantum technology that is the key to improving navigation and positioning systems. Translation of concepts such as superposition, entanglement, and quantum interference into quantum sensors pave the way toward high precision and accuracy in measuring gravitational, magnetic, and inertial forces. This chapter provides information on the performance of quantum sensors emphasizing navigation and positioning techniques. The superior performance of quantum accelerometers, gyroscopes, and magnetometers regarding sensitivity, non-drift, and lower errors are compared to classical systems. In addition, the implementation of quantum sensors in systems that can work alone, and in systems that are incorporated with classical GPS systems but have added quantum advantages is explained. This work also discusses the current research and development efforts on quantum sensors, the challenges of integrating them into modern applications, approaches to miniaturizing the technology for practical use, and their potential future adoption in areas such as creature design, autonomous transportation, defense, and aerospace. As a result of the comprehensive content included in this chapter, readers will gain a sufficient appreciation of the scientific principles upon which quantum sensors are anchored, as well as technology’s capability and versatility in enabling accurate navigation and positioning.
Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.
Quantum interferometer gravity gradiometer for 3D mapping is a project for developing the technology of atom interferometer-based gravity sensor in space. The atom interferometer utilizes atomic particles as free fall test masses to measure inertial forces with unprecedented sensitivity and precision. It also allows measurements of the gravity gradient tensor components for 3D mapping of subsurface mass distribution. The overall approach is based on recent advances of laser cooling and manipulation of atoms in atomic and optical physics. Atom interferometers have been demonstrated in research laboratories for gravity and gravity gradient measurements. In this approach, atoms are first laser cooled to micro-kelvin temperatures. Then they are allowed to freefall in vacuum as true drag-free test masses. During the free fall, a sequence of laser pulses is used to split and recombine the atom waves to realize the interferometric measurements. We have demonstrated atom interferometer operation in the Phase I period, and we are implementing the second generation for a complete gradiometer demonstration unit in the laboratory. Along with this development, we are developing technologies at component levels that will be more suited for realization of a space instrument. We will present an update of these developments and discuss the future directions of the quantum gravity gradiometer project.