Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.07253 · Quantum Science and Technology

Noise-aware entanglement generation protocols for superconducting qubits with impedance-matched FBAR transducers

Erin Sheridan, Michael Senatore, Samuel Schwab, Eric W. Aspling, Taylor W. Wagner, James Schneeloch, Stephen J. McCoy, Daniel L. Campbell, David Hucul, Zachary Smith, Matthew LaHaye

Published Sep 18, 2025• 1 citation
arXivHTMLPDF

Abstract

Abstract Connecting superconducting quantum processors to telecommunications-wavelength quantum networks is critically necessary to enable distributed quantum computing, secure communications, and other applications. Optically-mediated entanglement heralding protocols offer a near-term solution that can succeed with imperfect components, including sub-unity efficiency microwave-optical quantum transducers. The viability and performance of these protocols relies heavily on the properties of the transducers used: the conversion efficiency, resonator lifetimes, and added noise in the transducer directly influence the achievable entanglement generation rate and fidelity of an entanglement generation protocol. Here, we use an extended Butterworth–van Dyke (BVD) model to optimize the conversion efficiency and added noise of a Thin film bulk acoustic resonator (FBAR) piezo-optomechanical transducer. We use the outputs from this model to calculate the fidelity of one-photon and two-photon entanglement heralding protocols in a variety of operating regimes. For transducers with matching circuits designed to either minimize the added noise or maximize conversion efficiency, we theoretically estimate that entanglement generation rates of greater than 160 kHz can be achieved at moderate pump powers with fidelities of > 90 % . This is the first time a BVD equivalent circuit model is used to both optimize the performance of an FBAR transducer and to directly inform the design and implementation of an entanglement generation protocol. These results can be applied in the near term to realize quantum networks of superconducting qubits with realistic experimental parameters.

DOI
10.1088/2058-9565/ae08e0

Related papers

A two-dimensional piezo-optomechanical transducer

Tian Xie, Nelson Ooi, Linus Woodard +7 more

Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.

quant-pharXiv:2607.26161•Jul 30, 2026•2 citations

Bulk Acoustic Quantum Transduction

Maxwell Drimmer

Quantum networks of superconducting circuit quantum processors are an exciting prospect but are unfeasible without an efficient quantum interface between optical light and superconducting qubits. This problem motivates the development of a quantum microwave-to-optical transducer, a device that can faithfully transfer the state of a superconducting circuit to a photonic flying qubit and vice versa. This thesis describes our progress towards building a microwave-to-optical transducer mediated by phonons in a high-overtone bulk acoustic resonator (HBAR). Novel aluminum nitride-on-quartz HBARs are designed, fabricated, and tested. The acoustic loss rates are found to be near the state-of-the-art. Transduction-compatible transmon qubits are designed and tested. These qubits are capable of operating inside an optical cavity as well as achieving electromechanical interactions in the strong-coupling regime. An initial experiment studied how superconducting qubits recover after exposure to infrared light and demonstrated that the transduction-compatible qubits should be able to operate in a transducer with a reasonable duty cycle. The concept of microwave-to-optical transduction using multiple acoustic modes is established, and new simulation methods are developed to rapidly optimize HBARs. These tools are used to create a transduction-compatible qubit-HBAR device operating in the multi-mode strong coupling regime. Separately, a transduction compatible optical cavity was built and used to perform optomechanical measurements of a transduction-compatible HBAR and confirm that this device can reach the high-cooperativity regime. Finally, a measurement for verifying that a transducer is operating as a source of single photons is discussed. This can be accomplished by measuring the optical second-order correlation function of transduced photons. A filter cavity cascade is constructed to perform this measurement without being overwhelmed by optical pump leakage. These results establish bulk acoustic transduction as a promising platform for low-noise quantum microwave-to-optical transduction.

•Jan 1, 2025•0 citations

Design of an ultra-low mode volume piezo-optomechanical quantum transducer

Piero Chiappina, Jash Banker, Srujan Meesala +3 more

Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.

arXiv:2303.03664•Optics Express•Jun 14, 2023•17 citations

High-overtone bulk acoustic-wave resonators as a platform for microwave-to-optical quantum state transfer

Tom Schatteburg

As superconducting quantum computing devices grow more and more powerful [1–3], the quest to connect them over large-scale distances [4] becomes increasingly relevant. Microwave-to-optical transducers offer a pathway for such connections via a low-loss and thermal noise-free optical fiber network. However, achieving simultaneously high efficiency and low added noise is currently limited by a trade-off between both quantities due to pump absorption heating [5–9]. High-overtone bulk acoustic-wave resonators (HBARs) promise a solution to this problem due to their crystalline material and low surface-to-bulk ratio. In this thesis, we introduce an HBAR-based microwave-to-optical transducer to achieve quantum state transfer. As a first milestone, we build a Brillouin-optomechanical cavity that self-aligns when cooled down and is relatively insensitive to vibrations, which allows optomechanical coupling in an environment that is compatible with superconducting circuits. We measure the phonon mode occupation of the HBAR to be below 0.5, demonstrating the heaviest mechanical object measured in the quantum ground state to date. In addition, we show that the mode occupations are insensitive to laser pump power, indicating negligible absorption heating and confirming the unique advantage of this system. We then build a transducer device which combines Brillouin-optomechanical coupling and piezo-electromechanical coupling to a superconducting qubit in one geometry. We can align the optical cavity mode to pass through the ring-shaped antenna of the superconducting qubit without affecting the optical finesse. This allows us to measure optomechanical coupling in this device as a next milestone towards high-efficiency, low noise microwave-to-optical transduction.

•Jan 1, 2025•0 citations

Microwave-to-Optical Transduction Using a Mechanical Supermode for Coupling Piezoelectric and Optomechanical Resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in $\mathrm{Ga}\mathrm{As}$, followed by considerations of the $\mathrm{Al}\mathrm{N}$, ${\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}$, and $\mathrm{Al}\mathrm{N}$-on-$\mathrm{Si}$ platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing $N$, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and $N<0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.

arXiv:1907.04830•Physical Review Applied•Jan 16, 2020•78 citations

Distilled remote entanglement between superconducting qubits across optical channels

Nicolas Dirnegger, Moein Malekakhlagh, Vikesh Siddhu +5 more

Abstract A promising quantum computing architecture comprises modules of superconducting quantum processors linked via optical channels using quantum transducers. As quantum transducer hardware improves, a need has arisen to understand the quantitative relationship between transducer-device characteristics and the strength of the resulting remote entanglement. Using Monte Carlo simulations that incorporate 2-to-1 and 3-to-1 entanglement distillation methods, our model maps transducer device performance up to system-level channel performance, thereby allowing the performance of remote entanglement approaches to be compared and optimized. We find the extreme photon loss (EPL) distillation protocol to be particularly high performing. Moreover, even without distillation, present-day transducers with added noise of N add = 0.5 photons are at the threshold of enabling remote Bell pairs with fidelities exceeding 50%. If the next generation of transducers can improve by 3 orders of magnitude in added noise, efficiency, and repetition rates, then they would allow for remote two-qubit gates achieving 99.7% fidelities at MHz rates. These results set practical targets for transducers to be ready for deployment into modular quantum computing systems.

arXiv:2503.10842•Quantum Science and Technology•Dec 5, 2025•5 citations
Abstract Connecting superconducting quantum processors to telecommunications-wavelength quantum networks is critically necessary to enable distributed quantum computing, secure communications, and other applications. Optically-mediated entanglement heralding protocols offer a near-term solution that can succeed with imperfect components, including sub-unity efficiency microwave-optical quantum transducers. The viability and performance of these protocols relies heavily on the properties of the transducers used: the conversion efficiency, resonator lifetimes, and added noise in the transducer directly influence the achievable entanglement generation rate and fidelity of an entanglement generation protocol. Here, we use an extended Butterworth–van Dyke (BVD) model to optimize the conversion efficiency and added noise of a Thin film bulk acoustic resonator (FBAR) piezo-optomechanical transducer. We use the outputs from this model to calculate the fidelity of one-photon and two-photon entanglement heralding protocols in a variety of operating regimes. For transducers with matching circuits designed to either minimize the added noise or maximize conversion efficiency, we theoretically estimate that entanglement generation rates of greater than 160 kHz can be achieved at moderate pump powers with fidelities of > 90 % . This is the first time a BVD equivalent circuit model is used to both optimize the performance of an FBAR transducer and to directly inform the design and implementation of an entanglement generation protocol. These results can be applied in the near term to realize quantum networks of superconducting qubits with realistic experimental parameters.
Optical quantum networks provide a natural route for connecting distant superconducting quantum processors, enabling distributed quantum computation, sensing, and communication. Piezo-optomechanical transducers are among the leading candidates for scalable microwave-to-optical quantum interfaces. However, prior one-dimensional piezo-optomechanical transducers remain limited by optical-absorption-induced heating and the resulting thermal noise. Two-dimensional optomechanical crystals offer substantially improved thermalization from better thermal anchoring, but their structural complexity has so far hindered the realization of a fully integrated two-dimensional transducer. Here, we overcome this challenge with a new design strategy based on band structure engineering. We fabricate the devices and experimentally characterize the response, measuring an electromechanical damping rate of 4.6 kHz at room temperature and electromechanical coupling rate of 0.17 MHz by wire-bonding to a multi-mode microwave resonator at 10 mK. Bidirectional transduction is performed with a calibrated internal efficiency of 0.85\% in the continuous-wave operation, alongside pulsed photon-phonon pair generation near its quantum ground state. Our results represent a significant step toward high-efficiency and low-noise transducers for entangling remote superconducting qubits.
Quantum networks of superconducting circuit quantum processors are an exciting prospect but are unfeasible without an efficient quantum interface between optical light and superconducting qubits. This problem motivates the development of a quantum microwave-to-optical transducer, a device that can faithfully transfer the state of a superconducting circuit to a photonic flying qubit and vice versa. This thesis describes our progress towards building a microwave-to-optical transducer mediated by phonons in a high-overtone bulk acoustic resonator (HBAR). Novel aluminum nitride-on-quartz HBARs are designed, fabricated, and tested. The acoustic loss rates are found to be near the state-of-the-art. Transduction-compatible transmon qubits are designed and tested. These qubits are capable of operating inside an optical cavity as well as achieving electromechanical interactions in the strong-coupling regime. An initial experiment studied how superconducting qubits recover after exposure to infrared light and demonstrated that the transduction-compatible qubits should be able to operate in a transducer with a reasonable duty cycle. The concept of microwave-to-optical transduction using multiple acoustic modes is established, and new simulation methods are developed to rapidly optimize HBARs. These tools are used to create a transduction-compatible qubit-HBAR device operating in the multi-mode strong coupling regime. Separately, a transduction compatible optical cavity was built and used to perform optomechanical measurements of a transduction-compatible HBAR and confirm that this device can reach the high-cooperativity regime. Finally, a measurement for verifying that a transducer is operating as a source of single photons is discussed. This can be accomplished by measuring the optical second-order correlation function of transduced photons. A filter cavity cascade is constructed to perform this measurement without being overwhelmed by optical pump leakage. These results establish bulk acoustic transduction as a promising platform for low-noise quantum microwave-to-optical transduction.
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.
As superconducting quantum computing devices grow more and more powerful [1–3], the quest to connect them over large-scale distances [4] becomes increasingly relevant. Microwave-to-optical transducers offer a pathway for such connections via a low-loss and thermal noise-free optical fiber network. However, achieving simultaneously high efficiency and low added noise is currently limited by a trade-off between both quantities due to pump absorption heating [5–9]. High-overtone bulk acoustic-wave resonators (HBARs) promise a solution to this problem due to their crystalline material and low surface-to-bulk ratio. In this thesis, we introduce an HBAR-based microwave-to-optical transducer to achieve quantum state transfer. As a first milestone, we build a Brillouin-optomechanical cavity that self-aligns when cooled down and is relatively insensitive to vibrations, which allows optomechanical coupling in an environment that is compatible with superconducting circuits. We measure the phonon mode occupation of the HBAR to be below 0.5, demonstrating the heaviest mechanical object measured in the quantum ground state to date. In addition, we show that the mode occupations are insensitive to laser pump power, indicating negligible absorption heating and confirming the unique advantage of this system. We then build a transducer device which combines Brillouin-optomechanical coupling and piezo-electromechanical coupling to a superconducting qubit in one geometry. We can align the optical cavity mode to pass through the ring-shaped antenna of the superconducting qubit without affecting the optical finesse. This allows us to measure optomechanical coupling in this device as a next milestone towards high-efficiency, low noise microwave-to-optical transduction.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs\mathrm{Ga}\mathrm{As}GaAs, followed by considerations of the AlN\mathrm{Al}\mathrm{N}AlN, LiNbO3{\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}LiNbO3​, and AlN\mathrm{Al}\mathrm{N}AlN-on-Si\mathrm{Si}Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing NNN, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and N<0.5N<0.5N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
Abstract A promising quantum computing architecture comprises modules of superconducting quantum processors linked via optical channels using quantum transducers. As quantum transducer hardware improves, a need has arisen to understand the quantitative relationship between transducer-device characteristics and the strength of the resulting remote entanglement. Using Monte Carlo simulations that incorporate 2-to-1 and 3-to-1 entanglement distillation methods, our model maps transducer device performance up to system-level channel performance, thereby allowing the performance of remote entanglement approaches to be compared and optimized. We find the extreme photon loss (EPL) distillation protocol to be particularly high performing. Moreover, even without distillation, present-day transducers with added noise of N add = 0.5 photons are at the threshold of enabling remote Bell pairs with fidelities exceeding 50%. If the next generation of transducers can improve by 3 orders of magnitude in added noise, efficiency, and repetition rates, then they would allow for remote two-qubit gates achieving 99.7% fidelities at MHz rates. These results set practical targets for transducers to be ready for deployment into modular quantum computing systems.