Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.05677 · Scientific Reports

Electric-field sensing with driven-dissipative time crystals in room-temperature Rydberg vapor

Darmindra D. Arumugam

Published Apr 18, 2025• 9 citations
arXivHTMLPDF

Abstract

Mode competition in nonequilibrium Rydberg gases enables the exploration of emergent many-body phases. This work leverages this emergent phase for electric field detection at room temperature. Sensitive frequency-resolved electric field measurements at very low-frequencies (VLF) are of central importance in a wide range of applications where deep-penetration is required in communications, navigation and imaging or surveying. The long wavelengths on order of 10–100 km (3–30 kHz) limit the efficiency, sensitivity, and bandwidth of compact classical detectors that are constrained by Chu’s limit. Rydberg-atom electrometers are an attractive approach for microwave electric-field sensors but have reduced sensitivity at lower-frequencies. Very recent efforts to advance the standard Rydberg-atoms approach is based on DC electric-field (E-field) Stark shifting and have resulted in sensitivities between 67.9 and 2.2 uVcm -1 Hz -1/2 (0.1–10 kHz) by fine optimization of the DC E-field. A major challenge in these approaches is the need for embedded electrodes or plates due to DC E-field Stark screening effect, which can perturb coupling of VLF signals when injected from external sources. In this article, it is demonstrated that state-of-art sensitivity ((1.60 ± 0.23) uVcm -1 Hz -1/2 ) can instead be achieved using limit-cycle oscillations in driven-dissipative Rydberg atoms by using a magnetic field (B-field) to develop mode-competition between nearby Rydberg states. The mode-competition between nearby Rydberg-states develop an effective transition centered at the oscillation frequency capable of supporting external VLF E-field coupling in the ~ 10–15kHz regime without the requirement for fine optimization of the B-field magnitude.

DOI
10.1038/s41598-025-97560-9

Related papers

Stark modulated Rydberg dissipative time crystals at room temperature applied to sub-kHz electric field sensing

Darmindra D. Arumugam

Out-of-equilibrium Rydberg gases exhibit emergent many-body phases due to mode competition. Sustained limit cycle oscillations (OSC) emerge when driven by B-fields at room temperature, forming robust Rydberg dissipative time crystals (DTC). Here we show that DC and AC Stark fields in the sub-kHz regime can be used to precisely shift (DC) or modulate (AC) the oscillation frequency of these DTCs, providing a powerful method for controllable time-domain dynamics in a room-temperature system. The AC Stark modulation induces frequency modulation (FM) of the OSC spectrum, enabling narrowband detection of extremely weak AC electric fields in the sub-kHz regime, with DC fields detected via Stark-induced shifts of the oscillation frequency. With a modest setup, a sensitivity of ~ 7.8µVcm − 1 Hz − 1/2 at 300 Hz is demonstrated — an ~ 8.7× improvement over state-of-art in the sub-kHz regime. Unlike on-resonant DTC sensing that is limited to operation close to the emergent limit cycle oscillations (10–15 kHz), the present approach is effective in the DC-600 Hz sub-kHz regime. This approach overcomes the size and bandwidth limitations of classical antennas at ultra-low frequencies and establishes a new class of ultra-compact ( ≪ λ/10⁶) Rydberg-based electric-field sensors. These results open opportunities for compact extremely low-frequency (ELF) sensors in remote sensing, communications, geophysics, and biomedical diagnostics.

arXiv:2503.08972•Scientific Reports•Oct 15, 2025•11 citations

Low-frequency electric field sensing with a Rydberg beam

Jeremy Glick, John DICKSON, Josie Wood +1 more

We present a method for performing low-frequency electric-field sensing via ionization detection of Rydberg atoms in a collimated atomic beam. A collimated beam avoids many of the electric-field screening effects that are common in warm vapor cells due to the accumulation of alkali-metal atoms on glass surfaces. Further, a beam facilitates a spatially separated region for high signal-to-noise readout via ionization detection. Using this approach, we measure dc Stark shifts from external fields with frequencies as low as 1 Hz. The sensor demonstrates a sensitivity of better than 1 mV / m Hz for frequencies above 20 Hz and 0.14(4) mV / m Hz above 500 Hz with a linear dynamic range of over 50 dB.

arXiv:2604.01513•Physical Review A•Jun 15, 2026•3 citations

Electrometry of extremely-low frequencies from kHz to sub-Hz with a Rydberg-atom sensor

Aveek Chandra, Narongrit Paensin, Rainer Dumke

Rydberg-atom electric field sensing has shown great potential from near-DC to THz with state-of-the-art measurement metrics realized in sensitivity, phase extraction, multi-band receptivity, etc. While Rydberg-atom sensors have shown exceptional performance in the GHz regime, low-frequency operation has remained challenging because of electric-field-screening in conventional vapor cells, which suppresses externally applied fields. We overcome this limitation by combining auxiliary modulation and lock-in detection with a paraffin-coated vapor cell, and demonstrate an electrode-free, wideband method for sensing frequencies, ranging from 0.5 Hz to 10 kHz. Our work extends Rydberg-atom sensor range to VLF, ULF, SLF, ELF and sub-ELF frequency bands. In our method, high state-of-the-art sensitivities have been achieved - 819 $μ$V/cm/$\sqrt{\text{Hz}}$ for 1 Hz, 33 $μ$V/cm/$\sqrt{\text{Hz}}$ for 10 Hz, 10 $μ$V/cm/$\sqrt{\text{Hz}}$ for 100 Hz and 2 $μ$V/cm/$\sqrt{\text{Hz}}$ for 1 kHz.

quant-pharXiv:2603.13827•EPJ Quantum Technology•Mar 17, 2026•5 citations

High sensitivity measurement of ULF, VLF, and LF fields with a Rydberg-atom sensor

Mingwei Lei, Meng Shi

Fields with frequencies below megahertz are challenging for Rydberg-atom-based measurements, due to the low-frequency electric field screening effect caused by the alkali-metal atoms adsorbed on the inner surface of the container. In this paper, we investigate electric field measurements in the ultralow frequency (ULF), very low frequency (VLF), and low frequency (LF) bands in a Cs vapor cell with built-in parallel electrodes. With optimization of the applied DC field, we achieve high-sensitive detection of the electric field at frequencies of 1 kHz, 10 kHz, and 100 kHz based on the Rydberg-atom sensor, with the minimum electric field strength down to 18.0 μV/cm, 6.9 μV/cm, and 3.0 μV/cm, respectively. The corresponding sensitivity is 5.7 μV/cm/Hz 1/2 , 2.2 μV/cm/Hz 1/2 , and 0.95 μV/cm/Hz 1/2 for the ULF, VLF, and LF fields, which is better than a 1-cm dipole antenna. Besides, the linear dynamic range of the Rydberg-atom sensor is over 50 dB. This work presents the potential to enable more applications that utilize atomic sensing technology in the ULF, VLF, and LF fields.

arXiv:2405.04761•Optics Letters•Sep 12, 2024•19 citations

Super low-frequency electric field measurement based on Rydberg atoms

Ling Li, Yuechun Jiao, Jinlian Hu +4 more

We demonstrate the measurement of super low-frequency electric field using Rydberg atoms in an atomic vapor cell with inside parallel electrodes, thus overcoming the low-frequency electric-field-screening effect at frequencies below a few kHz. Rydberg electromagnetically induced transparency (EIT) spectra involving 52 D 5/2 state is employed to measure the signal electric field. An auxiliary DC field is applied to improve the sensitivity. A DC Stark map is demonstrated, where the utilized 52 D 5/2 exhibits m j = 1/2, 3/2, 5/2 Stark shifts and splittings. The m j = 1/2 state is employed to detect the signal field because of its larger polarizability than that of m j = 3/2, 5/2. Also, we show that the strength of the spectrum is dependent on the angle between the laser polarizations and the electric field. With optimization of the applied DC field to shift the m j = 1/2 Rydberg energy level to a high sensitivity region and the laser polarizations to obtain the maximum m j = 1/2 signal, we achieve the detection of the signal electric field with a frequency of 100 Hz down to 214.8 µ V/cm with a sensitivity of 67.9 µ V cm −1 Hz −1/2 , and the linear dynamic range is over 37 dB. Our work extends the measurement frequency of Rydberg sensors to super low frequency with high sensitivity, which has the advantages of high sensitivity and miniaturization for receiving super low frequency.

Optics Express•Aug 9, 2023•49 citations

Quantum sensing of low-frequency electric signal enabled by modulated auxiliary field in Rydberg atoms

Xiayang Fan, Shenchao Jin, Jiatian Liu +3 more

Rydberg atoms have emerged as a versatile and efficient platform for high-sensitivity quantum sensing of free-space electric fields, with remarkable progress in detecting low-frequency signals. To date, low-frequency Rydberg receivers have relied on a constant bias field, typically realized via intra-cell electrodes or Rydberg plasmas generated by photoelectric effects or inter-atomic interactions. While these approaches improve sensitivity, they suffer from inherent challenges in calibration, long-term stability, and robustness, hindering practical deployment. Here, we propose, design, and experimentally demonstrate a quantum sensing scheme for low-frequency electric signals using modulated auxiliary fields in Rydberg atoms. Unlike conventional methods that employ external DC electric fields that are often fully shielded by adsorbed atom layers on the cell walls, we introduce an AC-field modulation strategy. The incoming low-frequency signal mixes with the auxiliary field, and together they induce Stark shifts of the Rydberg level. These shifts are mapped onto the probe laser via electromagnetically induced transparency (EIT), in a manner analogous to heterodyne detection. We demonstrate a sensitivity of $7.5 \pm 2.6~\mathrm{μV/(cm\cdot Hz^{1/2})}$ at 5 kHz and a minimal detectable field of $0.26 \pm 0.04~\mathrm{μV/cm}$ with an integration time of 1000 s. Furthermore, we extend this approach to systematically analyze the performance of generalized auxiliary fields containing multiple frequency components. By virtue of modulated auxiliary field and quantum frequency mixing, our results establish a robust and systematic framework for quantum sensing of low-frequency electric fields with Rydberg atoms, offering improved sensitivity, stability, and immunity to environmental drifts.

quant-pharXiv:2607.18740•Jul 22, 2026•0 citations
Mode competition in nonequilibrium Rydberg gases enables the exploration of emergent many-body phases. This work leverages this emergent phase for electric field detection at room temperature. Sensitive frequency-resolved electric field measurements at very low-frequencies (VLF) are of central importance in a wide range of applications where deep-penetration is required in communications, navigation and imaging or surveying. The long wavelengths on order of 10–100 km (3–30 kHz) limit the efficiency, sensitivity, and bandwidth of compact classical detectors that are constrained by Chu’s limit. Rydberg-atom electrometers are an attractive approach for microwave electric-field sensors but have reduced sensitivity at lower-frequencies. Very recent efforts to advance the standard Rydberg-atoms approach is based on DC electric-field (E-field) Stark shifting and have resulted in sensitivities between 67.9 and 2.2 uVcm -1 Hz -1/2 (0.1–10 kHz) by fine optimization of the DC E-field. A major challenge in these approaches is the need for embedded electrodes or plates due to DC E-field Stark screening effect, which can perturb coupling of VLF signals when injected from external sources. In this article, it is demonstrated that state-of-art sensitivity ((1.60 ± 0.23) uVcm -1 Hz -1/2 ) can instead be achieved using limit-cycle oscillations in driven-dissipative Rydberg atoms by using a magnetic field (B-field) to develop mode-competition between nearby Rydberg states. The mode-competition between nearby Rydberg-states develop an effective transition centered at the oscillation frequency capable of supporting external VLF E-field coupling in the ~ 10–15kHz regime without the requirement for fine optimization of the B-field magnitude.
Out-of-equilibrium Rydberg gases exhibit emergent many-body phases due to mode competition. Sustained limit cycle oscillations (OSC) emerge when driven by B-fields at room temperature, forming robust Rydberg dissipative time crystals (DTC). Here we show that DC and AC Stark fields in the sub-kHz regime can be used to precisely shift (DC) or modulate (AC) the oscillation frequency of these DTCs, providing a powerful method for controllable time-domain dynamics in a room-temperature system. The AC Stark modulation induces frequency modulation (FM) of the OSC spectrum, enabling narrowband detection of extremely weak AC electric fields in the sub-kHz regime, with DC fields detected via Stark-induced shifts of the oscillation frequency. With a modest setup, a sensitivity of ~ 7.8µVcm − 1 Hz − 1/2 at 300 Hz is demonstrated — an ~ 8.7× improvement over state-of-art in the sub-kHz regime. Unlike on-resonant DTC sensing that is limited to operation close to the emergent limit cycle oscillations (10–15 kHz), the present approach is effective in the DC-600 Hz sub-kHz regime. This approach overcomes the size and bandwidth limitations of classical antennas at ultra-low frequencies and establishes a new class of ultra-compact ( ≪ λ/10⁶) Rydberg-based electric-field sensors. These results open opportunities for compact extremely low-frequency (ELF) sensors in remote sensing, communications, geophysics, and biomedical diagnostics.
We present a method for performing low-frequency electric-field sensing via ionization detection of Rydberg atoms in a collimated atomic beam. A collimated beam avoids many of the electric-field screening effects that are common in warm vapor cells due to the accumulation of alkali-metal atoms on glass surfaces. Further, a beam facilitates a spatially separated region for high signal-to-noise readout via ionization detection. Using this approach, we measure dc Stark shifts from external fields with frequencies as low as 1 Hz. The sensor demonstrates a sensitivity of better than 1 mV / m Hz for frequencies above 20 Hz and 0.14(4) mV / m Hz above 500 Hz with a linear dynamic range of over 50 dB.
Rydberg-atom electric field sensing has shown great potential from near-DC to THz with state-of-the-art measurement metrics realized in sensitivity, phase extraction, multi-band receptivity, etc. While Rydberg-atom sensors have shown exceptional performance in the GHz regime, low-frequency operation has remained challenging because of electric-field-screening in conventional vapor cells, which suppresses externally applied fields. We overcome this limitation by combining auxiliary modulation and lock-in detection with a paraffin-coated vapor cell, and demonstrate an electrode-free, wideband method for sensing frequencies, ranging from 0.5 Hz to 10 kHz. Our work extends Rydberg-atom sensor range to VLF, ULF, SLF, ELF and sub-ELF frequency bands. In our method, high state-of-the-art sensitivities have been achieved - 819 μμμV/cm/Hz\sqrt{\text{Hz}}Hz​ for 1 Hz, 33 μμμV/cm/Hz\sqrt{\text{Hz}}Hz​ for 10 Hz, 10 μμμV/cm/Hz\sqrt{\text{Hz}}Hz​ for 100 Hz and 2 μμμV/cm/Hz\sqrt{\text{Hz}}Hz​ for 1 kHz.
Fields with frequencies below megahertz are challenging for Rydberg-atom-based measurements, due to the low-frequency electric field screening effect caused by the alkali-metal atoms adsorbed on the inner surface of the container. In this paper, we investigate electric field measurements in the ultralow frequency (ULF), very low frequency (VLF), and low frequency (LF) bands in a Cs vapor cell with built-in parallel electrodes. With optimization of the applied DC field, we achieve high-sensitive detection of the electric field at frequencies of 1 kHz, 10 kHz, and 100 kHz based on the Rydberg-atom sensor, with the minimum electric field strength down to 18.0 μV/cm, 6.9 μV/cm, and 3.0 μV/cm, respectively. The corresponding sensitivity is 5.7 μV/cm/Hz 1/2 , 2.2 μV/cm/Hz 1/2 , and 0.95 μV/cm/Hz 1/2 for the ULF, VLF, and LF fields, which is better than a 1-cm dipole antenna. Besides, the linear dynamic range of the Rydberg-atom sensor is over 50 dB. This work presents the potential to enable more applications that utilize atomic sensing technology in the ULF, VLF, and LF fields.
We demonstrate the measurement of super low-frequency electric field using Rydberg atoms in an atomic vapor cell with inside parallel electrodes, thus overcoming the low-frequency electric-field-screening effect at frequencies below a few kHz. Rydberg electromagnetically induced transparency (EIT) spectra involving 52 D 5/2 state is employed to measure the signal electric field. An auxiliary DC field is applied to improve the sensitivity. A DC Stark map is demonstrated, where the utilized 52 D 5/2 exhibits m j = 1/2, 3/2, 5/2 Stark shifts and splittings. The m j = 1/2 state is employed to detect the signal field because of its larger polarizability than that of m j = 3/2, 5/2. Also, we show that the strength of the spectrum is dependent on the angle between the laser polarizations and the electric field. With optimization of the applied DC field to shift the m j = 1/2 Rydberg energy level to a high sensitivity region and the laser polarizations to obtain the maximum m j = 1/2 signal, we achieve the detection of the signal electric field with a frequency of 100 Hz down to 214.8 µ V/cm with a sensitivity of 67.9 µ V cm −1 Hz −1/2 , and the linear dynamic range is over 37 dB. Our work extends the measurement frequency of Rydberg sensors to super low frequency with high sensitivity, which has the advantages of high sensitivity and miniaturization for receiving super low frequency.
Rydberg atoms have emerged as a versatile and efficient platform for high-sensitivity quantum sensing of free-space electric fields, with remarkable progress in detecting low-frequency signals. To date, low-frequency Rydberg receivers have relied on a constant bias field, typically realized via intra-cell electrodes or Rydberg plasmas generated by photoelectric effects or inter-atomic interactions. While these approaches improve sensitivity, they suffer from inherent challenges in calibration, long-term stability, and robustness, hindering practical deployment. Here, we propose, design, and experimentally demonstrate a quantum sensing scheme for low-frequency electric signals using modulated auxiliary fields in Rydberg atoms. Unlike conventional methods that employ external DC electric fields that are often fully shielded by adsorbed atom layers on the cell walls, we introduce an AC-field modulation strategy. The incoming low-frequency signal mixes with the auxiliary field, and together they induce Stark shifts of the Rydberg level. These shifts are mapped onto the probe laser via electromagnetically induced transparency (EIT), in a manner analogous to heterodyne detection. We demonstrate a sensitivity of 7.5±2.6 μV/(cm⋅Hz1/2)7.5 \pm 2.6~\mathrm{μV/(cm\cdot Hz^{1/2})}7.5±2.6 μV/(cm⋅Hz1/2) at 5 kHz and a minimal detectable field of 0.26±0.04 μV/cm0.26 \pm 0.04~\mathrm{μV/cm}0.26±0.04 μV/cm with an integration time of 1000 s. Furthermore, we extend this approach to systematically analyze the performance of generalized auxiliary fields containing multiple frequency components. By virtue of modulated auxiliary field and quantum frequency mixing, our results establish a robust and systematic framework for quantum sensing of low-frequency electric fields with Rydberg atoms, offering improved sensitivity, stability, and immunity to environmental drifts.