Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.00188 · Physical Review A

Broadband pulsed quadrature measurements with calorimeters

Ezad Shojaee, James R. van Meter, Karl Mayer, Scott Glancy, Emanuel H. Knill

Published Oct 20, 2025• 2 citations
arXivHTMLPDF

Abstract

A fundamental problem in quantum optics is to measure a quadrature operator of a mode described by a shape in the time or frequency domain. This can be done by pulsed homodyne detection, in which the signal and a high-amplitude pulsed local oscillator (LO) interfere on a beam splitter whose output ports are monitored by photodetectors. The quadrature value is proportional to the difference between the photodetectors' signals. When the shape of the mode is too broad in frequency, the lack of uniform spectral response of detectors prevents direct application of this technique. We show that pulsed homodyne detection can be generalized to broadband pulsed (BBP) homodyne detection with detectors such as calorimeters that detect total energy instead of total photon number. This generalization has applications in measurements of femtosecond pulses and, speculatively, of Rindler modes. We analyze how the implemented measurement approaches an ideal quadrature measurement with growing LO amplitude, and we prove that the moments of the measurement converge to the moments of the quadrature and that the measurement distributions converge weakly.

DOI
10.1103/wmz2-5ft7

Related papers

Quantified convergence of general homodyne measurements with applications to continuous variable quantum computing

Emanuel Knill, Ezad Shojaee, James R. van Meter +2 more

In arXiv:2503.00188 we introduced broadband pulsed (BBP) homodyne measurements as a generalization of standard pulsed homodyne quadrature measurements. BBP can take advantage of detectors such as calorimeters that have the potential for high efficiency over a broad spectral range. BBP homodyne retains the advantages of standard pulsed homodyne, enabling measurement of arbitrary quadratures in the limit of large amplitude local oscillators (LO). Here we quantify the convergence of standard and BBP homodyne quadrature measurements to those of the quadrature of interest. We obtain lower bounds on the fidelity of the post-measurement classical-quantum state of outcomes and unmeasured modes, and the fidelity of the states obtained after applying operations conditional on measurement outcomes. The bounds depend on the LO amplitude and the moments of number operators. We demonstrate the practical relevance of these bounds by evaluating them for standard pulsed homodyne used for estimating values of the characteristic function of the Wigner distribution, expectations of moments, for quantum teleportation and for continuous variable error correction with GKP codes.

quant-pharXiv:2602.22511•Journal of Physics A Mathematical and Theoretical•Feb 27, 2026•0 citations

Homodyne-like detection scheme based on photon-number-resolving detectors

Alessia Allevi, Matteo Bina, Stefano Olivares +1 more

Homodyne detection is the most effective detection scheme employed in quantum optics to characterize quantum states. It is based on mixing at a beam splitter the signal to be measured with a coherent state, called the “local oscillator,” and on evaluating the difference of the photocurrents of two photodiodes measuring the outputs of the beam splitter. If the local oscillator is much more intense than the field to be measured, the homodyne signal is proportional to the signal-field quadratures. If the local oscillator is less intense, the photodiodes can be replaced with photon-number-resolving detectors, which have a smaller dynamics but can measure the light statistics. The resulting new homodyne-like detector acquires a hybrid nature, being it capable of yielding information on both the particle-like (statistics) and wave-like (phase) properties of light signals. The scheme has been tested in the measurement of the quadratures of coherent states, bracket states and phase-averaged coherent states at different intensities of the local oscillator.

International Journal of Quantum Information•Dec 1, 2017•14 citations

Quantum State Characterization Using Measurement Configurations Inspired by Homodyne Detection

Arik Avagyan

In the standard homodyne configuration, an unknown optical state is combined with a local oscillator (LO) on a beam splitter (BS). Good quadrature measurements require a high-amplitude LO and two high-efficiency photodiodes whose signals are subtracted and normalized. By changing the LO phase, it is then possible to infer the optical state in the mode matching the LO. For quantum information processing, the states of interest are in well-separated modes, corresponding to a pulsed configuration with one relevant LO mode per measurement. We theoretically investigate what can be learned about the unknown optical state by counting photons in one or both outgoing paths after the BS, keeping the LO mode fixed but choosing its phase and magnitude. We consider measurement configurations where the BS acts differently on different sets of matching modes. When the BS acts identically on all matching modes it is possible to determine the content of the unknown optical state in the mode matching the LO conditional on each number of photons in the orthogonal modes on the same path. In particular, if both the phase and the intensity of the LO can be varied, then the statistics of just one of the counters is enough to infer these parameters, while in the case of an LO with fixed intensity both detectors are needed to accomplish this. Our results are derived by demonstrating a bijection, or lack thereof, between the probability distributions over the space of outcomes of the counter(s) and certain parameters of the unknown state for different measurement configuration. We report an experiment that was conducted to demonstrate the theory in the case where the BS acts differently depending on the polarization.

arXiv:2305.19397•May 30, 2023•4 citations

Measurement of the Polarization State of a Weak Signal Field by Homodyne Detection

Sun-Hyun Youn

Information carried by an optical beam of light can usually be conveyed in the form of a temporal modulation of the intensity, phase, frequency or the polarization of the constituent mode(s). In that regard, homodyne detection is one of the most popular and standard method to measure the quantum mechanical properties of light Yuen & Shapiro (1978); Yuen et al. (1979); Yuen & Shapiro (1980); Yurke (1985). The quantum theory of homodyne detection originated principally from the works of Yuen and Shapiro et al. Yuen & Shapiro (1978); Yuen et al. (1979). In this method, a weak signal field is combined with a strong local oscillator field at a beam splitter, and the resulting signal is measured as a photocurrent. With the homodyne detection method, the quantum state of the signal field, such as the quadrature amplitude of the squeezed state, is easily measured Slusher et al. (1985); Wu et al. (1986 ); Polzik et al. (1992), and the quasiprobability distribution function can be measured by using the so-called optical homodyne tomography Smithey et al. (1993); Banaszek & W’odkiewicz (1996); Wallentowitz & Vogel (1996); Youn et al. (2001). Furthermore, optical homodyne detection is used to eavesdrop on the quantum key in quantum cryptography Hirano et al. (2000).

InTech eBooks•Mar 23, 2012•2 citations

Ultrafast measurement of optical-field statistics by dc-balanced homodyne detection

Michael G. Raymer, J. Cooper, H. J. Carmichael +2 more

The technique of dc-balanced, pulsed homodyne detection for the purpose of determining optical-field statistics on short time scales is analyzed theoretically. Such measurements provide photon-number and phase distributions associated with a repetitive signal light field in a short time window. Time- and space-varying signal and local-oscillator pulses are treated, thus generalizing earlier treatments of photoelectron difference statistics in homodyne detection. Experimental issues, such as the effects of imperfect detector balancing on (time-integrated) dc detection and the consequences of background noise caused by non-mode-matched parts of the multimode signal field, are analyzed. The Wigner, or joint, distribution for the two field-quadrature amplitudes during the sampling time window can be directly determined by tomographic inversion of the measured photoelectron distributions. It is pointed out that homodyne detection provides a new method for the simultaneous measurement of temporal and spectral information. Although the theory is generally formulated, with both signal and local-oscillator fields being quantized, emphasis is placed on the limit of a strong, coherent local-oscillator field, making semiclassical interpretation possible.

Journal of the Optical Society of America B•Oct 1, 1995•89 citations

Photon-number statistics from the phase-averaged quadrature-field distribution: Theory and ultrafast measurement

M. Munroe, Deepak Boggavarapu, Matthew E. Anderson +1 more

We prove that the photon-number distribution of an arbitrary single-mode optical state can be calculated directly from the phase-averaged quadrature amplitude distribution, measured using optical homodyne detection. We experimentally demonstrate the application of this result by measuring the ultrafast (subpicosecond), time-resolved photon-number statistics of a weak field from a pulsed diode laser. Also presented is a numerical calculation of the photon-number distribution of a quadrature-squeezed vacuum state.

Physical Review A•Aug 1, 1995•171 citations
A fundamental problem in quantum optics is to measure a quadrature operator of a mode described by a shape in the time or frequency domain. This can be done by pulsed homodyne detection, in which the signal and a high-amplitude pulsed local oscillator (LO) interfere on a beam splitter whose output ports are monitored by photodetectors. The quadrature value is proportional to the difference between the photodetectors' signals. When the shape of the mode is too broad in frequency, the lack of uniform spectral response of detectors prevents direct application of this technique. We show that pulsed homodyne detection can be generalized to broadband pulsed (BBP) homodyne detection with detectors such as calorimeters that detect total energy instead of total photon number. This generalization has applications in measurements of femtosecond pulses and, speculatively, of Rindler modes. We analyze how the implemented measurement approaches an ideal quadrature measurement with growing LO amplitude, and we prove that the moments of the measurement converge to the moments of the quadrature and that the measurement distributions converge weakly.
In arXiv:2503.00188 we introduced broadband pulsed (BBP) homodyne measurements as a generalization of standard pulsed homodyne quadrature measurements. BBP can take advantage of detectors such as calorimeters that have the potential for high efficiency over a broad spectral range. BBP homodyne retains the advantages of standard pulsed homodyne, enabling measurement of arbitrary quadratures in the limit of large amplitude local oscillators (LO). Here we quantify the convergence of standard and BBP homodyne quadrature measurements to those of the quadrature of interest. We obtain lower bounds on the fidelity of the post-measurement classical-quantum state of outcomes and unmeasured modes, and the fidelity of the states obtained after applying operations conditional on measurement outcomes. The bounds depend on the LO amplitude and the moments of number operators. We demonstrate the practical relevance of these bounds by evaluating them for standard pulsed homodyne used for estimating values of the characteristic function of the Wigner distribution, expectations of moments, for quantum teleportation and for continuous variable error correction with GKP codes.
Homodyne detection is the most effective detection scheme employed in quantum optics to characterize quantum states. It is based on mixing at a beam splitter the signal to be measured with a coherent state, called the “local oscillator,” and on evaluating the difference of the photocurrents of two photodiodes measuring the outputs of the beam splitter. If the local oscillator is much more intense than the field to be measured, the homodyne signal is proportional to the signal-field quadratures. If the local oscillator is less intense, the photodiodes can be replaced with photon-number-resolving detectors, which have a smaller dynamics but can measure the light statistics. The resulting new homodyne-like detector acquires a hybrid nature, being it capable of yielding information on both the particle-like (statistics) and wave-like (phase) properties of light signals. The scheme has been tested in the measurement of the quadratures of coherent states, bracket states and phase-averaged coherent states at different intensities of the local oscillator.
In the standard homodyne configuration, an unknown optical state is combined with a local oscillator (LO) on a beam splitter (BS). Good quadrature measurements require a high-amplitude LO and two high-efficiency photodiodes whose signals are subtracted and normalized. By changing the LO phase, it is then possible to infer the optical state in the mode matching the LO. For quantum information processing, the states of interest are in well-separated modes, corresponding to a pulsed configuration with one relevant LO mode per measurement. We theoretically investigate what can be learned about the unknown optical state by counting photons in one or both outgoing paths after the BS, keeping the LO mode fixed but choosing its phase and magnitude. We consider measurement configurations where the BS acts differently on different sets of matching modes. When the BS acts identically on all matching modes it is possible to determine the content of the unknown optical state in the mode matching the LO conditional on each number of photons in the orthogonal modes on the same path. In particular, if both the phase and the intensity of the LO can be varied, then the statistics of just one of the counters is enough to infer these parameters, while in the case of an LO with fixed intensity both detectors are needed to accomplish this. Our results are derived by demonstrating a bijection, or lack thereof, between the probability distributions over the space of outcomes of the counter(s) and certain parameters of the unknown state for different measurement configuration. We report an experiment that was conducted to demonstrate the theory in the case where the BS acts differently depending on the polarization.
Information carried by an optical beam of light can usually be conveyed in the form of a temporal modulation of the intensity, phase, frequency or the polarization of the constituent mode(s). In that regard, homodyne detection is one of the most popular and standard method to measure the quantum mechanical properties of light Yuen & Shapiro (1978); Yuen et al. (1979); Yuen & Shapiro (1980); Yurke (1985). The quantum theory of homodyne detection originated principally from the works of Yuen and Shapiro et al. Yuen & Shapiro (1978); Yuen et al. (1979). In this method, a weak signal field is combined with a strong local oscillator field at a beam splitter, and the resulting signal is measured as a photocurrent. With the homodyne detection method, the quantum state of the signal field, such as the quadrature amplitude of the squeezed state, is easily measured Slusher et al. (1985); Wu et al. (1986 ); Polzik et al. (1992), and the quasiprobability distribution function can be measured by using the so-called optical homodyne tomography Smithey et al. (1993); Banaszek & W’odkiewicz (1996); Wallentowitz & Vogel (1996); Youn et al. (2001). Furthermore, optical homodyne detection is used to eavesdrop on the quantum key in quantum cryptography Hirano et al. (2000).
The technique of dc-balanced, pulsed homodyne detection for the purpose of determining optical-field statistics on short time scales is analyzed theoretically. Such measurements provide photon-number and phase distributions associated with a repetitive signal light field in a short time window. Time- and space-varying signal and local-oscillator pulses are treated, thus generalizing earlier treatments of photoelectron difference statistics in homodyne detection. Experimental issues, such as the effects of imperfect detector balancing on (time-integrated) dc detection and the consequences of background noise caused by non-mode-matched parts of the multimode signal field, are analyzed. The Wigner, or joint, distribution for the two field-quadrature amplitudes during the sampling time window can be directly determined by tomographic inversion of the measured photoelectron distributions. It is pointed out that homodyne detection provides a new method for the simultaneous measurement of temporal and spectral information. Although the theory is generally formulated, with both signal and local-oscillator fields being quantized, emphasis is placed on the limit of a strong, coherent local-oscillator field, making semiclassical interpretation possible.
We prove that the photon-number distribution of an arbitrary single-mode optical state can be calculated directly from the phase-averaged quadrature amplitude distribution, measured using optical homodyne detection. We experimentally demonstrate the application of this result by measuring the ultrafast (subpicosecond), time-resolved photon-number statistics of a weak field from a pulsed diode laser. Also presented is a numerical calculation of the photon-number distribution of a quadrature-squeezed vacuum state.