Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Quantum Information

Homodyne-like detection scheme based on photon-number-resolving detectors

Alessia Allevi, Matteo Bina, Stefano Olivares, Maria Bondani

Published Dec 1, 2017• 14 citations
Publisher

Abstract

Homodyne detection is the most effective detection scheme employed in quantum optics to characterize quantum states. It is based on mixing at a beam splitter the signal to be measured with a coherent state, called the “local oscillator,” and on evaluating the difference of the photocurrents of two photodiodes measuring the outputs of the beam splitter. If the local oscillator is much more intense than the field to be measured, the homodyne signal is proportional to the signal-field quadratures. If the local oscillator is less intense, the photodiodes can be replaced with photon-number-resolving detectors, which have a smaller dynamics but can measure the light statistics. The resulting new homodyne-like detector acquires a hybrid nature, being it capable of yielding information on both the particle-like (statistics) and wave-like (phase) properties of light signals. The scheme has been tested in the measurement of the quadratures of coherent states, bracket states and phase-averaged coherent states at different intensities of the local oscillator.

DOI
10.1142/s0219749917400160

Related papers

Hybrid homodyne-like detection scheme with photon-number-resolving detectors

Alessia Allevi, Matteo Bina, Stefano Olivares +1 more

The measurement of quantum states of light is fundamental for the investigations of Quantum Optics and for the applications of Quantum Information. Here we present the implementation of a novel detection apparatus, that is a homodyne-like detection scheme based on photon-number-resolving detectors. Thanks to its hybrid nature, the apparatus is useful to investigate both the particle-like and wave-like properties of light. We tested the scheme in the measurement of the quadratures of different optical states, namely coherent states and mixtures of coherent states. In particular, we investigate the performance of our scheme compared to that of a standard homodyne detector.

Photonics & Electromagnetics Research Symposium - Spring (PIERS-Spring)•May 1, 2017•1 citation

Measurement of the Polarization State of a Weak Signal Field by Homodyne Detection

Sun-Hyun Youn

Information carried by an optical beam of light can usually be conveyed in the form of a temporal modulation of the intensity, phase, frequency or the polarization of the constituent mode(s). In that regard, homodyne detection is one of the most popular and standard method to measure the quantum mechanical properties of light Yuen & Shapiro (1978); Yuen et al. (1979); Yuen & Shapiro (1980); Yurke (1985). The quantum theory of homodyne detection originated principally from the works of Yuen and Shapiro et al. Yuen & Shapiro (1978); Yuen et al. (1979). In this method, a weak signal field is combined with a strong local oscillator field at a beam splitter, and the resulting signal is measured as a photocurrent. With the homodyne detection method, the quantum state of the signal field, such as the quadrature amplitude of the squeezed state, is easily measured Slusher et al. (1985); Wu et al. (1986 ); Polzik et al. (1992), and the quasiprobability distribution function can be measured by using the so-called optical homodyne tomography Smithey et al. (1993); Banaszek & W’odkiewicz (1996); Wallentowitz & Vogel (1996); Youn et al. (2001). Furthermore, optical homodyne detection is used to eavesdrop on the quantum key in quantum cryptography Hirano et al. (2000).

InTech eBooks•Mar 23, 2012•2 citations

Homodyne statistics

Samuel L. Braunstein

The balanced homodyne detector is the paradigm of phase-sensitive detection schemes in quantum optics. We study the effects of a quantum local oscillator in a coherent state for this detector when it is coupled to a single signal mode. We calculate explicit general expressions for the output statistics of the difference current of this detector (applicable even to non-classical states), and compare them to the statistics of the so-called quadrature-phase amplitude. We show that the naive condition that the number of quanta in the local oscillator be much larger than the number in the signal is not sufficient to ensure that the homodyne detector approximates an ideal detectorof the quadrature-phase amplitude, further, we derive explicit conditions for this approximation to be achieved when the signal is a coherent state or a superposition of coherent states.

Annual Meeting Optical Society of America•Jan 1, 1990•0 citations

Quantum-State Tomography with Photon-Number-Resolving Homodyne Detection

Stefano Olivares, Alessia Allevi, Matteo G. A. Paris +1 more

A homodyne-like detection scheme based on photon-number-resolving and low-intensity a local oscillator is exploited to reconstruct optical quantum states by applying the same tomographic reconstruction procedures originally developed for standard homodyne detection based on photodiodes.

Quantum Information and Measurement (QIM)•Jan 1, 2019•1 citation

Quantum State Characterization Using Measurement Configurations Inspired by Homodyne Detection

Arik Avagyan

In the standard homodyne configuration, an unknown optical state is combined with a local oscillator (LO) on a beam splitter (BS). Good quadrature measurements require a high-amplitude LO and two high-efficiency photodiodes whose signals are subtracted and normalized. By changing the LO phase, it is then possible to infer the optical state in the mode matching the LO. For quantum information processing, the states of interest are in well-separated modes, corresponding to a pulsed configuration with one relevant LO mode per measurement. We theoretically investigate what can be learned about the unknown optical state by counting photons in one or both outgoing paths after the BS, keeping the LO mode fixed but choosing its phase and magnitude. We consider measurement configurations where the BS acts differently on different sets of matching modes. When the BS acts identically on all matching modes it is possible to determine the content of the unknown optical state in the mode matching the LO conditional on each number of photons in the orthogonal modes on the same path. In particular, if both the phase and the intensity of the LO can be varied, then the statistics of just one of the counters is enough to infer these parameters, while in the case of an LO with fixed intensity both detectors are needed to accomplish this. Our results are derived by demonstrating a bijection, or lack thereof, between the probability distributions over the space of outcomes of the counter(s) and certain parameters of the unknown state for different measurement configuration. We report an experiment that was conducted to demonstrate the theory in the case where the BS acts differently depending on the polarization.

arXiv:2305.19397•May 30, 2023•4 citations

Statistics of difference events in homodyne detection

W. Vogel, Jens Grabow

The statistics of the difference events in a balanced homodyne-detection scheme is studied without using the standard assumption of a strong, classical local oscillator. Starting from the quantum theory of photon counting, we derive the probability distribution for the difference events in the two detection channels. In the limit of the local oscillator being strong compared with the signal, the difference-number statistics tends to the statistics of the electric-field strength of the signal field. For weak signals, this limit may be obtained already far from a classical behavior of the local oscillator. While changing the local oscillator intensity, a transition of the observable concerning the signal field occurs from the photon-number difference towards the electric-field strength. Such a measurement scheme renders it possible to observe the quantum features of a coherent state or a single-photon state from the point of view of the field-strength statistics, a picture which is closely related to classical optics. The possibility to get some insight in the statistical properties of the phase difference of two microscopic fields is discussed.

Physical Review A•May 1, 1993•89 citations
Homodyne detection is the most effective detection scheme employed in quantum optics to characterize quantum states. It is based on mixing at a beam splitter the signal to be measured with a coherent state, called the “local oscillator,” and on evaluating the difference of the photocurrents of two photodiodes measuring the outputs of the beam splitter. If the local oscillator is much more intense than the field to be measured, the homodyne signal is proportional to the signal-field quadratures. If the local oscillator is less intense, the photodiodes can be replaced with photon-number-resolving detectors, which have a smaller dynamics but can measure the light statistics. The resulting new homodyne-like detector acquires a hybrid nature, being it capable of yielding information on both the particle-like (statistics) and wave-like (phase) properties of light signals. The scheme has been tested in the measurement of the quadratures of coherent states, bracket states and phase-averaged coherent states at different intensities of the local oscillator.
The measurement of quantum states of light is fundamental for the investigations of Quantum Optics and for the applications of Quantum Information. Here we present the implementation of a novel detection apparatus, that is a homodyne-like detection scheme based on photon-number-resolving detectors. Thanks to its hybrid nature, the apparatus is useful to investigate both the particle-like and wave-like properties of light. We tested the scheme in the measurement of the quadratures of different optical states, namely coherent states and mixtures of coherent states. In particular, we investigate the performance of our scheme compared to that of a standard homodyne detector.
Information carried by an optical beam of light can usually be conveyed in the form of a temporal modulation of the intensity, phase, frequency or the polarization of the constituent mode(s). In that regard, homodyne detection is one of the most popular and standard method to measure the quantum mechanical properties of light Yuen & Shapiro (1978); Yuen et al. (1979); Yuen & Shapiro (1980); Yurke (1985). The quantum theory of homodyne detection originated principally from the works of Yuen and Shapiro et al. Yuen & Shapiro (1978); Yuen et al. (1979). In this method, a weak signal field is combined with a strong local oscillator field at a beam splitter, and the resulting signal is measured as a photocurrent. With the homodyne detection method, the quantum state of the signal field, such as the quadrature amplitude of the squeezed state, is easily measured Slusher et al. (1985); Wu et al. (1986 ); Polzik et al. (1992), and the quasiprobability distribution function can be measured by using the so-called optical homodyne tomography Smithey et al. (1993); Banaszek & W’odkiewicz (1996); Wallentowitz & Vogel (1996); Youn et al. (2001). Furthermore, optical homodyne detection is used to eavesdrop on the quantum key in quantum cryptography Hirano et al. (2000).
The balanced homodyne detector is the paradigm of phase-sensitive detection schemes in quantum optics. We study the effects of a quantum local oscillator in a coherent state for this detector when it is coupled to a single signal mode. We calculate explicit general expressions for the output statistics of the difference current of this detector (applicable even to non-classical states), and compare them to the statistics of the so-called quadrature-phase amplitude. We show that the naive condition that the number of quanta in the local oscillator be much larger than the number in the signal is not sufficient to ensure that the homodyne detector approximates an ideal detectorof the quadrature-phase amplitude, further, we derive explicit conditions for this approximation to be achieved when the signal is a coherent state or a superposition of coherent states.
In the standard homodyne configuration, an unknown optical state is combined with a local oscillator (LO) on a beam splitter (BS). Good quadrature measurements require a high-amplitude LO and two high-efficiency photodiodes whose signals are subtracted and normalized. By changing the LO phase, it is then possible to infer the optical state in the mode matching the LO. For quantum information processing, the states of interest are in well-separated modes, corresponding to a pulsed configuration with one relevant LO mode per measurement. We theoretically investigate what can be learned about the unknown optical state by counting photons in one or both outgoing paths after the BS, keeping the LO mode fixed but choosing its phase and magnitude. We consider measurement configurations where the BS acts differently on different sets of matching modes. When the BS acts identically on all matching modes it is possible to determine the content of the unknown optical state in the mode matching the LO conditional on each number of photons in the orthogonal modes on the same path. In particular, if both the phase and the intensity of the LO can be varied, then the statistics of just one of the counters is enough to infer these parameters, while in the case of an LO with fixed intensity both detectors are needed to accomplish this. Our results are derived by demonstrating a bijection, or lack thereof, between the probability distributions over the space of outcomes of the counter(s) and certain parameters of the unknown state for different measurement configuration. We report an experiment that was conducted to demonstrate the theory in the case where the BS acts differently depending on the polarization.
The statistics of the difference events in a balanced homodyne-detection scheme is studied without using the standard assumption of a strong, classical local oscillator. Starting from the quantum theory of photon counting, we derive the probability distribution for the difference events in the two detection channels. In the limit of the local oscillator being strong compared with the signal, the difference-number statistics tends to the statistics of the electric-field strength of the signal field. For weak signals, this limit may be obtained already far from a classical behavior of the local oscillator. While changing the local oscillator intensity, a transition of the observable concerning the signal field occurs from the photon-number difference towards the electric-field strength. Such a measurement scheme renders it possible to observe the quantum features of a coherent state or a single-photon state from the point of view of the field-strength statistics, a picture which is closely related to classical optics. The possibility to get some insight in the statistical properties of the phase difference of two microscopic fields is discussed.