Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.21159 · Physical Review A

Bogoliubov-Born-Green-Kirkwood-Yvon hierarchy for quantum error mitigation

Theo Saporiti, Oleg Kaikov, Vasily Sazonov, Mohamed Tamaazousti

Published Jul 29, 2025• 3 citations
arXivHTMLPDF

Abstract

Mitigation of quantum errors is critical for current NISQ devices. In the present work, we address this task by treating the execution of quantum algorithms as the time evolution of an idealized physical system. We use knowledge of its physics to assist the mitigation of the quantum noise produced on the real device. In particular, the time evolution of the idealized system obeys a corresponding Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) hierarchy of equations. This is the basis for the novel error mitigation scheme that we propose. Specifically, we employ a subset of the BBGKY hierarchy as supplementary constraints in the zero-noise extrapolation (ZNE) method for error mitigation. We ensure that the computational cost of the scheme scales polynomially with the system size. We test our method on digital quantum simulations of the lattice Schwinger model under noise levels mimicking realistic quantum hardware. We demonstrate that our scheme systematically improves the error mitigation for the measurements of the particle number and the charge within this system. Relative to ZNE, we obtain an average reduction of the error by $(18.2\ifmmode\pm\else\textpm\fi{}0.5)%$ and $(52.8\ifmmode\pm\else\textpm\fi{}6.3)%$ for the respective above observables. We propose further applications of the BBGKY hierarchy for quantum error mitigation.

DOI
10.1103/slbz-3r4b

Related papers

Quantum error mitigation by hierarchy-informed sampling: chiral dynamics in the Schwinger model

Theo Saporiti, Oleg Kaikov, Vasily Sazonov +1 more

Quantum simulations on current NISQ hardware are limited by its noisy nature, making efficient quantum error mitigation methods highly demanded. In this paper we introduce a novel mitigation scheme, applicable to arbitrary quantum simulations of time-dependent Hamiltonian dynamics on NISQ devices. The scheme uses a polynomial subset of extended qubit Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) hierarchy equations as a sampling criterion of possible mitigated candidates for the quantum observables. We show that for favorable Hamiltonians the polynomial subset of BBGKY hierarchy equations leads to a polynomial overhead in both classical and quantum resources. We employ the method to mitigate simulations of the chiral magnetic effect (CME), a chiral feature of the Schwinger model. We empirically show the effectiveness of our scheme at recovering the real-time dynamics of the CME from noisy quantum simulations of the Schwinger model, for a range of different parameter values of the model. We numerically demonstrate a systematic reduction of quantum noise, together with an increasing noise reduction capability as the amount of BBGKY constraints grows.

quant-pharXiv:2603.04339•Mar 5, 2026•1 citation

Feynman's clock and hierarchy-informed sampling for quantum error mitigation

Theo Saporiti

Near-term physical implementations of quantum algorithms require efficient quantum error mitigation schemes to reduce quantum noise. In this letter we propose a new mitigation technique, by extending the applicability of our BBGKY-ISM scheme from quantum simulations of spin chains to arbitrary quantum circuits. We map executions of quantum circuits using Feynman's clock Hamiltonian to the Hamiltonian dynamics of a corresponding quantum system, whose time evolution obeys a BBGKY-like hierarchy of equations informing the BBGKY-ISM mitigation. We show that the method's classical and quantum overheads are polynomial in the circuit size and in the number of qubits. We apply our method to numerical simulations of tunable Bell state preparation circuits under state-of-the-art quantum noise, and numerically demonstrate its systematic and controllable quantum error reduction capability.

quant-pharXiv:2607.06752•Jul 9, 2026•0 citations

Mitigating Realistic Noise in Practical Noisy Intermediate-Scale Quantum Devices

Jinzhao Sun, Xiao Yuan, Takahiro Tsunoda +3 more

Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.

arXiv:2001.04891•Physical Review Applied•Mar 9, 2021•116 citations

Enhancing quantum computation accuracy on IBM quantum hardware through advanced error mitigation strategies

V. Karthick, D Lakshanya, P. M. Ashok Kumar

Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.

Discover Quantum Science•May 20, 2026•2 citations

A Novel Approach for Mitigating Gate- Level Noise in IBM Quantum Hardware via Zero Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC) Techniques

Mohammed Suhaib, V. Karthick, D. Maria Monica

Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.

•Dec 8, 2025•2 citations

Practical quantum error mitigation for analog quantum simulation

Jinzhao Sun, Xiao Yuan, Takahiro Tsunoda +3 more

Analog quantum simulation has been proposed as an efficient approach for probing classically intractable many-body physics. In contrast to digital, gate-based quantum simulation, the analog approach involves configuring the quantum hardware to directly mimic the physics of the target system. This reduces the level of control required and can offer a degree of inherent robustness, but it comes at the cost that known error-handling techniques may be inapplicable. Accumulation of error is thus a major challenge facing medium-scale and large-scale analog quantum simulation with current and near-term noisy quantum (NISQ) devices. Here we propose a hybrid error mitigation scheme that can suppress general local Markovian noise in analog quantum simulators. We employ stochastic error mitigation for physical noise and use Richardson extrapolation to compensate for model estimation error. We numerically test the error mitigation scheme for an Ising-type Hamiltonian with energy relaxation and dephasing noise, and show an improvement of simulation accuracy by two orders. We assess the resource cost of our error mitigation scheme and conclude that analog quantum simulation at scale is feasible with NISQ hardware.

•Jan 14, 2020•1 citation
Mitigation of quantum errors is critical for current NISQ devices. In the present work, we address this task by treating the execution of quantum algorithms as the time evolution of an idealized physical system. We use knowledge of its physics to assist the mitigation of the quantum noise produced on the real device. In particular, the time evolution of the idealized system obeys a corresponding Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) hierarchy of equations. This is the basis for the novel error mitigation scheme that we propose. Specifically, we employ a subset of the BBGKY hierarchy as supplementary constraints in the zero-noise extrapolation (ZNE) method for error mitigation. We ensure that the computational cost of the scheme scales polynomially with the system size. We test our method on digital quantum simulations of the lattice Schwinger model under noise levels mimicking realistic quantum hardware. We demonstrate that our scheme systematically improves the error mitigation for the measurements of the particle number and the charge within this system. Relative to ZNE, we obtain an average reduction of the error by (18.2\ifmmode±\else\textpm\fi0.5)(18.2\ifmmode\pm\else\textpm\fi{}0.5)%(18.2\ifmmode±\else\textpm\fi0.5) and (52.8\ifmmode±\else\textpm\fi6.3)(52.8\ifmmode\pm\else\textpm\fi{}6.3)%(52.8\ifmmode±\else\textpm\fi6.3) for the respective above observables. We propose further applications of the BBGKY hierarchy for quantum error mitigation.
Quantum simulations on current NISQ hardware are limited by its noisy nature, making efficient quantum error mitigation methods highly demanded. In this paper we introduce a novel mitigation scheme, applicable to arbitrary quantum simulations of time-dependent Hamiltonian dynamics on NISQ devices. The scheme uses a polynomial subset of extended qubit Bogoliubov-Born-Green-Kirkwood-Yvon (BBGKY) hierarchy equations as a sampling criterion of possible mitigated candidates for the quantum observables. We show that for favorable Hamiltonians the polynomial subset of BBGKY hierarchy equations leads to a polynomial overhead in both classical and quantum resources. We employ the method to mitigate simulations of the chiral magnetic effect (CME), a chiral feature of the Schwinger model. We empirically show the effectiveness of our scheme at recovering the real-time dynamics of the CME from noisy quantum simulations of the Schwinger model, for a range of different parameter values of the model. We numerically demonstrate a systematic reduction of quantum noise, together with an increasing noise reduction capability as the amount of BBGKY constraints grows.
Near-term physical implementations of quantum algorithms require efficient quantum error mitigation schemes to reduce quantum noise. In this letter we propose a new mitigation technique, by extending the applicability of our BBGKY-ISM scheme from quantum simulations of spin chains to arbitrary quantum circuits. We map executions of quantum circuits using Feynman's clock Hamiltonian to the Hamiltonian dynamics of a corresponding quantum system, whose time evolution obeys a BBGKY-like hierarchy of equations informing the BBGKY-ISM mitigation. We show that the method's classical and quantum overheads are polynomial in the circuit size and in the number of qubits. We apply our method to numerical simulations of tunable Bell state preparation circuits under state-of-the-art quantum noise, and numerically demonstrate its systematic and controllable quantum error reduction capability.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.
Abstract Hardware Error Outputs of Quantum Computing Not Reliable because of Hardware Calibration Drift, Measurement Noise, Gate Errors on NISQ Systems. Even though MEMs, ZNEs, and CDRs slightly increase output accuracy, they operate under the assumption of static noise, therefore they do not account for changing output of the NISQ devices in real-time. The limitations of MEMs, ZNEs, and CDRs can be overcome by using the Hybrid Adaptive Error Mitigation (HAEM) method proposed in this article that has the capability to combine baseline measurement-error mitigation with Real-time Calibration Circuits and Lightweight-Machine-learning algorithms for adaptive error-correcting and increasing the overall output integrity of quantum devices affected by fluctuations in noise. The application of the HAEM method will utilize Qiskit Runtime to develop, implement, and validate the Hybrid Adaptive Error Mitigation method through testing using controlled noisy simulated environments based on the characteristics of current advanced NISQ quantum computers. The results of the tests demonstrate the HAEM architecture provides a higher level of accuracy and fidelity than static and non-mitigated executions ("mitigated execution vs. HAEM execution"), providing an increase of up to thirty-four percent in fidelity under high-noise conditions with minimal computational overhead. The results demonstrate that the use of adaptive and data-driven mitigation techniques, like those used in the Hybrid Adaptive Error Mitigation method, are an efficient way to increase the accuracy of quantum computations.
Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.
Analog quantum simulation has been proposed as an efficient approach for probing classically intractable many-body physics. In contrast to digital, gate-based quantum simulation, the analog approach involves configuring the quantum hardware to directly mimic the physics of the target system. This reduces the level of control required and can offer a degree of inherent robustness, but it comes at the cost that known error-handling techniques may be inapplicable. Accumulation of error is thus a major challenge facing medium-scale and large-scale analog quantum simulation with current and near-term noisy quantum (NISQ) devices. Here we propose a hybrid error mitigation scheme that can suppress general local Markovian noise in analog quantum simulators. We employ stochastic error mitigation for physical noise and use Richardson extrapolation to compensate for model estimation error. We numerically test the error mitigation scheme for an Ising-type Hamiltonian with energy relaxation and dephasing noise, and show an improvement of simulation accuracy by two orders. We assess the resource cost of our error mitigation scheme and conclude that analog quantum simulation at scale is feasible with NISQ hardware.