Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Practical quantum error mitigation for analog quantum simulation

Jinzhao Sun, Xiao Yuan, Takahiro Tsunoda, Vlatko Vedral, Simon C. Bejamin, Suguru Endo

Published Jan 14, 2020• 1 citation
OpenAlex

Abstract

Analog quantum simulation has been proposed as an efficient approach for probing classically intractable many-body physics. In contrast to digital, gate-based quantum simulation, the analog approach involves configuring the quantum hardware to directly mimic the physics of the target system. This reduces the level of control required and can offer a degree of inherent robustness, but it comes at the cost that known error-handling techniques may be inapplicable. Accumulation of error is thus a major challenge facing medium-scale and large-scale analog quantum simulation with current and near-term noisy quantum (NISQ) devices. Here we propose a hybrid error mitigation scheme that can suppress general local Markovian noise in analog quantum simulators. We employ stochastic error mitigation for physical noise and use Richardson extrapolation to compensate for model estimation error. We numerically test the error mitigation scheme for an Ising-type Hamiltonian with energy relaxation and dephasing noise, and show an improvement of simulation accuracy by two orders. We assess the resource cost of our error mitigation scheme and conclude that analog quantum simulation at scale is feasible with NISQ hardware.

Related papers

Mitigating Realistic Noise in Practical Noisy Intermediate-Scale Quantum Devices

Jinzhao Sun, Xiao Yuan, Takahiro Tsunoda +3 more

Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.

arXiv:2001.04891•Physical Review Applied•Mar 9, 2021•116 citations

Designing Machine Learning Error-Mitigation Protocols for High-Fidelity Digital Quantum Simulation

Albert Schmidt

The pursuit of high-fidelity digital quantum simulation is fundamentally constrained by the inevitable presence of noise in current and near-term quantum processors. While quantum error correction ultimately promises fault-tolerance, its substantial qubit overhead renders it impractical for the noisy intermediate-scale quantum (NISQ) era. This research addresses the critical gap between hardware imperfections and simulation accuracy by designing systematic, resource-efficient machine learning (ML) error-mitigation protocols tailored specifically for digital quantum simulation. Unlike generic error-suppression methods, our approach exploits the unique structural properties of simulated quantum dynamics—including time-translation invariance, locality of interactions, and conserved quantities—to inform the training of lightweight neural networks and Gaussian process regressors. We develop a hybrid framework that combines randomized compiling with data-driven noise-inversion models, enabling real-time estimation and subtraction of both coherent and incoherent errors without exponential sampling overhead. Through extensive numerical benchmarks on spin-chain and Fermi-Hubbard models, we demonstrate that our ML protocols achieve up to an order-of-magnitude reduction in infidelity compared to standard probabilistic error cancellation and zero-noise extrapolation, while requiring fewer calibration circuits. Furthermore, we introduce an adaptive online learning scheme that continuously refines the mitigation model during the simulation runtime, automatically adjusting to time-dependent drift in hardware noise. Our results establish a practical pathway toward scalable, high-accuracy quantum simulations on existing devices, with implications for condensed matter physics, quantum chemistry, and the development of quantum advantage benchmarks.

•Jul 14, 2026•0 citations

Mitigating errors in analog quantum simulation by Hamiltonian reshaping or Hamiltonian rescaling

Rui-Cheng Guo, Yanwu Gu, Dong E. Liu

Simulating quantum many-body systems is crucial for advancing physics but poses substantial challenges for classical computers. Quantum simulations overcome these limitations, with analog simulators offering unique advantages over digital methods, such as lower systematic errors and reduced circuit depth, making them efficient for studying complex quantum phenomena. However, unlike their digital counterparts, analog quantum simulations face significant limitations due to the absence of effective error mitigation techniques. This work introduces two novel error mitigation strategies—Hamiltonian reshaping and Hamiltonian rescaling—in analog quantum simulation for tasks like eigen-energy evaluation. Hamiltonian reshaping uses random unitary transformations to generate new Hamiltonians with identical eigenvalues but varied eigenstates, allowing error reduction through averaging. Hamiltonian rescaling mitigates errors by comparing eigenvalue estimates from energy-scaled Hamiltonians. Numerical calculations validate both methods, demonstrating their significant practical effectiveness in enhancing the accuracy and reliability of analog quantum simulators.

arXiv:2410.23719•npj Quantum Information•Jan 28, 2025•3 citations

Benchmarking noise extrapolation with the OpenPulse control framework

John W. O. Garmon, Raphael C. Pooser, Eugene Dumitrescu

Distilling precise estimates from noisy intermediate scale quantum (NISQ) data has recently attracted considerable attention Kandala et al., Nature (London) 567, 491 (2019). In order to augment digital qubit metrics, such as gate fidelity, we discuss analog error mitigability, i.e., the ability to accurately distill precise observable estimates, as a hybrid quantum classical computing benchmarking task. Specifically, using Rabi oscillations as a test program, we characterize single qubit error rates on IBM's Poughkeepsie superconducting quantum hardware, incorporate control-mediated noise dependence into a generalized rescaling protocol, and analyze how noise characteristics influence Richardson extrapolation-based error mitigation. Our results identify regions in the space of Hamiltonian control fields and circuit depth which are most amenable to reliable noise extrapolation, as well as shed light on how low-level hardware characterization can be used as a predictive tool for uncertainty quantification in error-mitigated NISQ computations.

arXiv:1909.05219•Physical Review A•Apr 6, 2020•21 citations

Noise-Assisted Digital Quantum Simulation of Open Systems Using Partial Probabilistic Error Cancellation

José D. Guimarães, James Lim, Mikhail I. Vasilevskiy +2 more

Quantum systems are inherently open and susceptible to environmental noise, which can have both detrimental and beneficial effects on their dynamics.This phenomenon has been observed in biomolecular systems, where noise enables novel functionalities, making the simulation of their dynamics a crucial target for digital and analog quantum simulation.Nevertheless, the computational capabilities of current quantum devices are often limited due to their inherent noise.In this work, we present a novel approach that capitalizes on the intrinsic noise of quantum devices to reduce the computational resources required for simulating open quantum systems.Our approach combines quantum noise characterization methods with quantum error mitigation techniques, enabling us to manipulate and control the intrinsic noise in a quantum circuit.Specifically, we selectively enhance or reduce decoherence rates in the quantum circuit to achieve the desired simulation of open-system dynamics.We provide a detailed description of our methods and report on the results of noise characterization and quantum error mitigation experiments conducted on both real and emulated IBM Quantum computers.Additionally, we estimate the experimental resource requirements for our techniques.Our approach holds the potential to unlock new simulation techniques in noisy intermediate-scale quantum devices, harnessing their intrinsic noise to enhance quantum computations.

arXiv:2302.14592•PRX Quantum•Nov 21, 2023•64 citations

Error Mitigation–Driven Enhancement of QAOA Performance on NISQ Devices

Kondreddy Sathwika, Maka Sri Varshith, Marati Nanda Kumar +1 more

The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.

International Conference on AI-Driven Smart Systems and Ubiquitous Computing (ICAUC)•Jan 19, 2026•0 citations
Analog quantum simulation has been proposed as an efficient approach for
probing classically intractable many-body physics. In contrast to digital,
gate-based quantum simulation, the analog approach involves configuring the
quantum hardware to directly mimic the physics of the target system. This
reduces the level of control required and can offer a degree of inherent
robustness, but it comes at the cost that known error-handling techniques may
be inapplicable. Accumulation of error is thus a major challenge facing
medium-scale and large-scale analog quantum simulation with current and
near-term noisy quantum (NISQ) devices. Here we propose a hybrid error
mitigation scheme that can suppress general local Markovian noise in analog
quantum simulators. We employ stochastic error mitigation for physical noise
and use Richardson extrapolation to compensate for model estimation error. We
numerically test the error mitigation scheme for an Ising-type Hamiltonian with
energy relaxation and dephasing noise, and show an improvement of simulation
accuracy by two orders. We assess the resource cost of our error mitigation
scheme and conclude that analog quantum simulation at scale is feasible with
NISQ hardware.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.
The pursuit of high-fidelity digital quantum simulation is fundamentally constrained by the inevitable presence of noise in current and near-term quantum processors. While quantum error correction ultimately promises fault-tolerance, its substantial qubit overhead renders it impractical for the noisy intermediate-scale quantum (NISQ) era. This research addresses the critical gap between hardware imperfections and simulation accuracy by designing systematic, resource-efficient machine learning (ML) error-mitigation protocols tailored specifically for digital quantum simulation. Unlike generic error-suppression methods, our approach exploits the unique structural properties of simulated quantum dynamics—including time-translation invariance, locality of interactions, and conserved quantities—to inform the training of lightweight neural networks and Gaussian process regressors. We develop a hybrid framework that combines randomized compiling with data-driven noise-inversion models, enabling real-time estimation and subtraction of both coherent and incoherent errors without exponential sampling overhead. Through extensive numerical benchmarks on spin-chain and Fermi-Hubbard models, we demonstrate that our ML protocols achieve up to an order-of-magnitude reduction in infidelity compared to standard probabilistic error cancellation and zero-noise extrapolation, while requiring fewer calibration circuits. Furthermore, we introduce an adaptive online learning scheme that continuously refines the mitigation model during the simulation runtime, automatically adjusting to time-dependent drift in hardware noise. Our results establish a practical pathway toward scalable, high-accuracy quantum simulations on existing devices, with implications for condensed matter physics, quantum chemistry, and the development of quantum advantage benchmarks.
Simulating quantum many-body systems is crucial for advancing physics but poses substantial challenges for classical computers. Quantum simulations overcome these limitations, with analog simulators offering unique advantages over digital methods, such as lower systematic errors and reduced circuit depth, making them efficient for studying complex quantum phenomena. However, unlike their digital counterparts, analog quantum simulations face significant limitations due to the absence of effective error mitigation techniques. This work introduces two novel error mitigation strategies—Hamiltonian reshaping and Hamiltonian rescaling—in analog quantum simulation for tasks like eigen-energy evaluation. Hamiltonian reshaping uses random unitary transformations to generate new Hamiltonians with identical eigenvalues but varied eigenstates, allowing error reduction through averaging. Hamiltonian rescaling mitigates errors by comparing eigenvalue estimates from energy-scaled Hamiltonians. Numerical calculations validate both methods, demonstrating their significant practical effectiveness in enhancing the accuracy and reliability of analog quantum simulators.
Distilling precise estimates from noisy intermediate scale quantum (NISQ) data has recently attracted considerable attention Kandala et al., Nature (London) 567, 491 (2019). In order to augment digital qubit metrics, such as gate fidelity, we discuss analog error mitigability, i.e., the ability to accurately distill precise observable estimates, as a hybrid quantum classical computing benchmarking task. Specifically, using Rabi oscillations as a test program, we characterize single qubit error rates on IBM's Poughkeepsie superconducting quantum hardware, incorporate control-mediated noise dependence into a generalized rescaling protocol, and analyze how noise characteristics influence Richardson extrapolation-based error mitigation. Our results identify regions in the space of Hamiltonian control fields and circuit depth which are most amenable to reliable noise extrapolation, as well as shed light on how low-level hardware characterization can be used as a predictive tool for uncertainty quantification in error-mitigated NISQ computations.
Quantum systems are inherently open and susceptible to environmental noise, which can have both detrimental and beneficial effects on their dynamics.This phenomenon has been observed in biomolecular systems, where noise enables novel functionalities, making the simulation of their dynamics a crucial target for digital and analog quantum simulation.Nevertheless, the computational capabilities of current quantum devices are often limited due to their inherent noise.In this work, we present a novel approach that capitalizes on the intrinsic noise of quantum devices to reduce the computational resources required for simulating open quantum systems.Our approach combines quantum noise characterization methods with quantum error mitigation techniques, enabling us to manipulate and control the intrinsic noise in a quantum circuit.Specifically, we selectively enhance or reduce decoherence rates in the quantum circuit to achieve the desired simulation of open-system dynamics.We provide a detailed description of our methods and report on the results of noise characterization and quantum error mitigation experiments conducted on both real and emulated IBM Quantum computers.Additionally, we estimate the experimental resource requirements for our techniques.Our approach holds the potential to unlock new simulation techniques in noisy intermediate-scale quantum devices, harnessing their intrinsic noise to enhance quantum computations.
The Quantum Approximate Optimization Algorithm (QAOA) is widely regarded as a promising near-term quantum algorithm for addressing hard combinatorial optimization problems on Noisy Intermediate-Scale Quantum (NISQ) devices; however, its real-world effectiveness is severely constrained by hardware noise, including gate infidelities, decoherence, and measurement errors. This work explores an error mitigation–driven approach to enhance the performance and robustness of QAOA without altering its algorithmic structure or requiring fault-tolerant quantum resources. Measurement error mitigation and zero-noise extrapolation are incorporated into the execution and post-processing stages of QAOA circuits and evaluated using the Minimum Vertex Cover problem as a representative benchmark. Performance is assessed through approximation ratios, solution stability, and noise sensitivity across multiple circuit depths. The results indicate that error mitigation not only improves approximation accuracy but also stabilizes output distributions and delays performance degradation at increased circuit depths. Additionally, the mitigated executions demonstrate better consistency across repeated runs, highlighting improved resilience to stochastic noise. These findings emphasize that lightweight and hardware-efficient error mitigation techniques can significantly extend the practical usability of QAOA on current NISQ hardware, providing a scalable and realistic pathway for executing quantum optimization algorithms more reliably in near-term quantum computing environments.