Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.16426 · Physical Review Applied

Correlated dephasing in a piezoelectrically transduced silicon phononic waveguide

Oliver A. Hitchcock, Felix M. Mayor, Wentao Jiang, M. P. Maksymowych, Sultan Malik, Amir H. Safavi‐Naeini

Published Dec 16, 2025• 5 citations
arXivHTMLPDF

Abstract

Nanomechanical waveguides offer a multitude of applications in quantum and classical technologies. Here, we design, fabricate, and characterize a compact silicon single-mode phononic waveguide actuated by a thin-film lithium niobate piezoelectric element. Our device directly transduces between microwave frequency photons and phonons propagating in the silicon waveguide, providing a route for coupling to superconducting circuits. We probe the device at millikelvin temperatures through a superconducting microwave resonant matching cavity to reveal harmonics of the silicon waveguide and extract a piezoelectric coupling rate $g/2π= 1.1$ megahertz and a mechanical coupling rate $f/2π=5$ megahertz. Through time-domain measurements of the silicon mechanical modes, we observe energy relaxation timescales of $T_{1,\text{in}} \approx 500$ microseconds, pure dephasing timescales of $T_ϕ\approx {60}$ microseconds and dephasing dynamics that indicate the presence of an underlying frequency noise process with a non-uniform spectral distribution. We measure phase noise cross-correlations between silicon mechanical modes and observe detuning-dependent positively-correlated frequency fluctuations. Our measurements provide valuable insights into the dynamics and decoherence characteristics of hybrid piezoelectric-silicon acoustic devices, and suggest approaches for mitigating and circumventing noise processes for emerging quantum acoustic systems.

DOI
10.1103/gv96-8xp1

Related papers

Design of an ultra-low mode volume piezo-optomechanical quantum transducer

Piero Chiappina, Jash Banker, Srujan Meesala +3 more

Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.

arXiv:2303.03664•Optics Express•Jun 14, 2023•17 citations

Observation of interface piezoelectricity in superconducting devices on silicon

Haoxin Zhou, Eric Li, Kadircan Godeneli +7 more

Abstract The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K 2 ≈ (3 ± 0.4) × 10 −5 %, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 10 4 − 10 8 , depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.

arXiv:2409.10626•Nature Communications•Dec 5, 2025•8 citations

Quantum acoustics with superconducting qubits

Yiwen Chu, Prashanta Kharel, William H. Renninger +4 more

Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.

arXiv:1703.00342•Science•Sep 22, 2017•502 citations

Frequency-resolved decoherence spectroscopy of a semiconductor charge qubit coupled to a high-impedance resonator

Ekaterina Al-Tavil, Wonjin Jang, David J. van Woerkom +10 more

Superconducting resonators coupled to semiconductor quantum dots provide a powerful platform to investigate light-matter interaction and decoherence mechanisms in solid-state quantum systems. Here we study a hybrid circuit quantum electrodynamics architecture consisting of a GaAs double-quantum-dot charge qubit capacitively coupled to a high-impedance, frequency-tunable SQUID-array resonator. By tuning the qubit transition frequency over the range $ω_\mathrm{q}/2π\sim 3$-$6$ GHz, we perform frequency-resolved decoherence spectroscopy of the charge qubit across a broad energy window. Time-resolved measurements enable us to disentangle relaxation and pure dephasing processes and to identify distinct decoherence regimes as a function of qubit frequency. We find that at lower frequencies ($\leq 4.5$ GHz) dephasing dominates the qubit linewidth, whereas at higher frequencies energy relaxation becomes the leading contribution. The measured frequency dependence of the relaxation rate exhibits a cubic scaling, consistent with charge-qubit decay dominated by coupling to a piezoelectric phonon bath and providing frequency-resolved access to the corresponding phonon-induced spectral density. Our results show that hybrid semiconductor--superconducting circuits can serve as sensitive spectroscopic tools to probe microscopic decoherence mechanisms relevant for a wide range of hybrid quantum devices.

cond-mat.mes-hallCross-listedarXiv:2606.09722•Jun 9, 2026•1 citation

Piezoelectric loss of superconducting microwave resonators integrated with thin-film lithium niobate

Likai Yang, Yuntao Xu, Chunzhen Li +3 more

Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.

Physical Review Applied•Nov 13, 2023•4 citations

Millisecond phonon lifetimes in piezoelectric nanomechanical resonators

Oliver A. Hitchcock, Matthew P. Maksymowych, Kaveh Pezeshki +5 more

Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding $4\times10^8$ ($f\cdot Q_i > 10^{18}$) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.

cond-mat.mes-hallCross-listedarXiv:2610.10700•Oct 9, 2026
Nanomechanical waveguides offer a multitude of applications in quantum and classical technologies. Here, we design, fabricate, and characterize a compact silicon single-mode phononic waveguide actuated by a thin-film lithium niobate piezoelectric element. Our device directly transduces between microwave frequency photons and phonons propagating in the silicon waveguide, providing a route for coupling to superconducting circuits. We probe the device at millikelvin temperatures through a superconducting microwave resonant matching cavity to reveal harmonics of the silicon waveguide and extract a piezoelectric coupling rate g/2π=1.1g/2π= 1.1g/2π=1.1 megahertz and a mechanical coupling rate f/2π=5f/2π=5f/2π=5 megahertz. Through time-domain measurements of the silicon mechanical modes, we observe energy relaxation timescales of T1,in≈500T_{1,\text{in}} \approx 500T1,in​≈500 microseconds, pure dephasing timescales of Tϕ≈60T_ϕ\approx {60}Tϕ​≈60 microseconds and dephasing dynamics that indicate the presence of an underlying frequency noise process with a non-uniform spectral distribution. We measure phase noise cross-correlations between silicon mechanical modes and observe detuning-dependent positively-correlated frequency fluctuations. Our measurements provide valuable insights into the dynamics and decoherence characteristics of hybrid piezoelectric-silicon acoustic devices, and suggest approaches for mitigating and circumventing noise processes for emerging quantum acoustic systems.
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.
Abstract The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K 2 ≈ (3 ± 0.4) × 10 −5 %, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 10 4 − 10 8 , depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.
Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.
Superconducting resonators coupled to semiconductor quantum dots provide a powerful platform to investigate light-matter interaction and decoherence mechanisms in solid-state quantum systems. Here we study a hybrid circuit quantum electrodynamics architecture consisting of a GaAs double-quantum-dot charge qubit capacitively coupled to a high-impedance, frequency-tunable SQUID-array resonator. By tuning the qubit transition frequency over the range ωq/2π∼3ω_\mathrm{q}/2π\sim 3ωq​/2π∼3-666 GHz, we perform frequency-resolved decoherence spectroscopy of the charge qubit across a broad energy window. Time-resolved measurements enable us to disentangle relaxation and pure dephasing processes and to identify distinct decoherence regimes as a function of qubit frequency. We find that at lower frequencies (≤4.5\leq 4.5≤4.5 GHz) dephasing dominates the qubit linewidth, whereas at higher frequencies energy relaxation becomes the leading contribution. The measured frequency dependence of the relaxation rate exhibits a cubic scaling, consistent with charge-qubit decay dominated by coupling to a piezoelectric phonon bath and providing frequency-resolved access to the corresponding phonon-induced spectral density. Our results show that hybrid semiconductor--superconducting circuits can serve as sensitive spectroscopic tools to probe microscopic decoherence mechanisms relevant for a wide range of hybrid quantum devices.
Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.
Piezoelectric nanomechanical resonators operating at gigahertz frequencies are a promising platform for quantum information processing and precision sensing, but phonon lifetimes have been limited to the microsecond range, widely attributed to the higher intrinsic loss of piezoelectric materials. Here we show that this limitation is not fundamental. Using a fabrication process informed by recent studies of defect-mediated loss in lithium niobate, we combine chemical restoration of ion-milled surfaces with a shadow-mask metallization process to produce lithium niobate phononic crystal resonators with inferred internal phonon lifetimes of up to 21 milliseconds at 3.6 gigahertz, corresponding to quality factors exceeding 4×1084\times10^84×108 (f⋅Qi>1018f\cdot Q_i > 10^{18}f⋅Qi​>1018) at millikelvin temperatures. By systematically varying the electrode-to-resonator spacing, we demonstrate that the measured lifetime is set by external coupling between the device and the measurement circuit rather than material loss. This establishes that lithium niobate, once fabrication-induced surface damage is removed, achieves an intrinsic quality comparable to the best mechanical materials while remaining an intrinsically piezoelectric platform with strong electromechanical coupling.