Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.
Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.
Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Qi≈4.3×104. Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.
Quantum networks of superconducting circuit quantum processors are an exciting prospect but are unfeasible without an efficient quantum interface between optical light and superconducting qubits. This problem motivates the development of a quantum microwave-to-optical transducer, a device that can faithfully transfer the state of a superconducting circuit to a photonic flying qubit and vice versa. This thesis describes our progress towards building a microwave-to-optical transducer mediated by phonons in a high-overtone bulk acoustic resonator (HBAR). Novel aluminum nitride-on-quartz HBARs are designed, fabricated, and tested. The acoustic loss rates are found to be near the state-of-the-art. Transduction-compatible transmon qubits are designed and tested. These qubits are capable of operating inside an optical cavity as well as achieving electromechanical interactions in the strong-coupling regime. An initial experiment studied how superconducting qubits recover after exposure to infrared light and demonstrated that the transduction-compatible qubits should be able to operate in a transducer with a reasonable duty cycle. The concept of microwave-to-optical transduction using multiple acoustic modes is established, and new simulation methods are developed to rapidly optimize HBARs. These tools are used to create a transduction-compatible qubit-HBAR device operating in the multi-mode strong coupling regime. Separately, a transduction compatible optical cavity was built and used to perform optomechanical measurements of a transduction-compatible HBAR and confirm that this device can reach the high-cooperativity regime. Finally, a measurement for verifying that a transducer is operating as a source of single photons is discussed. This can be accomplished by measuring the optical second-order correlation function of transduced photons. A filter cavity cascade is constructed to perform this measurement without being overwhelmed by optical pump leakage. These results establish bulk acoustic transduction as a promising platform for low-noise quantum microwave-to-optical transduction.
Nanomechanical systems can support highly coherent microwave-frequency excitations at cryogenic temperatures. However, generating sufficient coupling between these devices and superconducting quantum circuits is challenging due to the vastly different length scales of acoustic and electromagnetic excitations. Here we demonstrate a general method for calculating piezoelectric interactions between quantum circuits and arbitrary phononic nanostructures. We illustrate our technique by studying the coupling between a transmon qubit and bulk acoustic-wave, Lamb-wave, and phononic crystal resonators, and show that very large coupling rates are possible in all three cases. Our results suggest a route to phononic circuits and systems that are nonlinear at the single-phonon level.
Hybrid quantum systems combine the unique advantages of different physical platforms with the goal of realizing more powerful and practical quantum information processing devices. Mechanical systems, such as bulk acoustic wave resonators, feature a large number of highly coherent harmonic modes in a compact footprint, which complements the strong nonlinearities and fast operation times of superconducting quantum circuits. Here, we demonstrate an architecture for mechanical resonator-based quantum computing, in which a superconducting qubit is used to perform quantum gates on a collection of mechanical modes. We show the implementation of a universal gate set, composed of single-qubit gates and controlled arbitrary-phase gates, and showcase their use in the quantum Fourier transform and quantum period finding algorithms. These results pave the way toward using mechanical systems to build crucial components for future quantum technologies, such as quantum random-access memories.