Achieving precise control over quantum systems presents a significant challenge, especially in many-body setups, where residual couplings and unintended transitions undermine the accuracy of quantum operations. In superconducting qubits, parasitic interactions-both between distant qubits and with spurious two-level systems-can severely limit the performance of quantum gates. In this Letter, we introduce a pulse-shaping technique that uses spectrally balanced microwave pulses to suppress undesired transitions. Experimental results demonstrate an order-of-magnitude reduction in spurious excitations between weakly detuned qubits as well as a substantial decrease in single-qubit gate errors caused by a strongly coupled two-level defect over a broad frequency range. Our method provides a simple yet powerful solution for mitigating adverse effects from parasitic couplings, enhancing quantum gate fidelity. The pulse-shaping technique can be readily adapted to various physical systems.
Achieving precise control over quantum systems presents a significant challenge, especially in many-body setups, where residual couplings and unintended transitions undermine the accuracy of quantum operations. In superconducting qubits, parasitic interactions-both between distant qubits and with spurious two-level systems-can severely limit the performance of quantum gates. In this Letter, we introduce a pulse-shaping technique that uses spectrally balanced microwave pulses to suppress undesired transitions. Experimental results demonstrate an order-of-magnitude reduction in spurious excitations between weakly detuned qubits as well as a substantial decrease in single-qubit gate errors caused by a strongly coupled two-level defect over a broad frequency range. Our method provides a simple yet powerful solution for mitigating adverse effects from parasitic couplings, enhancing quantum gate fidelity. The pulse-shaping technique can be readily adapted to various physical systems.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
In conventional architectures of superconducting quantum computers, each qubit is connected to its own control line, leading to a commensurate increase in the number of microwave lines as the system scales. Frequency-multiplexed qubit control addresses this problem by enabling multiple qubits to share a single microwave line. However, it can cause unwanted excitation of nontarget qubits, especially when the detuning between qubits is smaller than the pulse bandwidth. Here, we propose a selective-excitation-pulse (SEP) technique that suppresses unwanted excitations by shaping a drive pulse to create null points at nontarget qubit frequencies. In a proof-of-concept experiment with three fixed-frequency transmon qubits, we demonstrate that the SEP technique achieves single-qubit gate fidelities comparable to those obtained with conventional Gaussian pulses while effectively suppressing unwanted excitations in nontarget qubits. These results highlight the SEP technique as a promising tool for enhancing frequency-multiplexed qubit control.
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.
Simple analytic pulse-shaping techniques are of great practical utility in quantum control, with prime examples being the DRAG method for suppressing leakage in superconducting microwave gates and the transitionless-driving approach to shortcuts-to-adiabaticity. Standard versions of these methods require two orthogonal control channels, with the second channel effectively breaking time-reversal symmetry. This appears to rule out their use in settings with only a single real-valued control field, such as the kind of baseband flux control that is common in many superconducting circuit architectures. We show here that a simple analytic pulse-shaping technique derived via a Magnus expansion is effective even with just a single baseband control channel. We demonstrate its efficacy by simulating a two-qubit gate between transmons realized with a tunable coupler and baseband flux pulses. Our corrections dramatically reduce non-adiabatic leakage caused by ramping the coupler: for realistic device parameters, leakage in a fast iSWAP gate is suppressed by up to three orders of magnitude. Our approach is general, goes beyond simply suppressing unwanted spectral weight at leakage transitions, and can be applied to a variety of platforms.
Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.