The exploitation of sub-MHz (<1 MHz) benefits a wide range of applications like underwater vehicular communication, subsurface exploration, low-frequency navigation etc. The traditional electrical receivers in this band are either hundreds of meters long or, when miniaturized, inefficient and bandwidth-limited, making them inapplicable for practical underwater implementations. Such obstacles can be circumvented by the emerging Rydberg atomic receiving technology, which is capable of detecting fields from DC up to the terahertz regime with compact structure. Against this background, we propose a method to detect sub-MHz electric fields without further calibration. Specifically, a physics-based model of the combined DC and AC-Stark response is established. Based on the model, we modulate the DC-Stark spectrum with the received signal and extract its amplitude by fitting the cycle-averaged, symmetric Stark-split peaks. Then we map this swing directly to the intrinsic atomic polarizability. By such operations, the proposed method can remove the dependence on electrode spacing or field-amplitude references. For performance evaluation, six-level Lindblad simulations and experiments conducted at a low-frequency field of 30 kHz demonstrate a minimum detectable field of 5.3 mV/cm, with stable readout across practical optical-power variations. The approach manages to expand the operating range of Rydberg atomic receivers below 1 MHz, and enables compact, calibration-free quantum front ends for underwater and subsurface receivers.
The exploitation of sub-MHz (<1 MHz) benefits a wide range of applications like underwater vehicular communication, subsurface exploration, low-frequency navigation etc. The traditional electrical receivers in this band are either hundreds of meters long or, when miniaturized, inefficient and bandwidth-limited, making them inapplicable for practical underwater implementations. Such obstacles can be circumvented by the emerging Rydberg atomic receiving technology, which is capable of detecting fields from DC up to the terahertz regime with compact structure. Against this background, we propose a method to detect sub-MHz electric fields without further calibration. Specifically, a physics-based model of the combined DC and AC-Stark response is established. Based on the model, we modulate the DC-Stark spectrum with the received signal and extract its amplitude by fitting the cycle-averaged, symmetric Stark-split peaks. Then we map this swing directly to the intrinsic atomic polarizability. By such operations, the proposed method can remove the dependence on electrode spacing or field-amplitude references. For performance evaluation, six-level Lindblad simulations and experiments conducted at a low-frequency field of 30 kHz demonstrate a minimum detectable field of 5.3 mV/cm, with stable readout across practical optical-power variations. The approach manages to expand the operating range of Rydberg atomic receivers below 1 MHz, and enables compact, calibration-free quantum front ends for underwater and subsurface receivers.
Rydberg atomic receiver holds distinctive advantages of ultra-wide operating bandwidth and inherently high sensitivity in electric field measurement 1 , in particular, it promises unique superiority of miniaturization for low-frequency especially kHz-band signals, which hold pivotal value in applications such as long-range navigation, ground-penetrating radar, and underwater communication. However, the capability of kHz atomic receivers remains severely constrained by the shielding effects of adsorbed alkali metal atoms. Here, we propose a conceptually new self-dressing kHz signal measurement paradigm by converting the undesired coupling-laser-induced DC field to an atomic dressing, and deftly building atomic superheterodyne inside the sapphire vapor cell, which is prepared to adequately suppress the low-frequency shielding through resistivity manipulation engineering. Further, we realize strengthened interaction between the atoms and kHz field by localized enhancement of the incident signals, and finally achieve an ultrahigh sensitivity of 13.5 nV/cm/Hz 1/2 at 100 kHz. This architecture represents a significant advance, with the potential to greatly accelerate the practical applications of Rydberg atomic receivers in kHz-band detection, communication, and related fields.
Rydberg atoms have emerged as a versatile and efficient platform for high-sensitivity quantum sensing of free-space electric fields, with remarkable progress in detecting low-frequency signals. To date, low-frequency Rydberg receivers have relied on a constant bias field, typically realized via intra-cell electrodes or Rydberg plasmas generated by photoelectric effects or inter-atomic interactions. While these approaches improve sensitivity, they suffer from inherent challenges in calibration, long-term stability, and robustness, hindering practical deployment. Here, we propose, design, and experimentally demonstrate a quantum sensing scheme for low-frequency electric signals using modulated auxiliary fields in Rydberg atoms. Unlike conventional methods that employ external DC electric fields that are often fully shielded by adsorbed atom layers on the cell walls, we introduce an AC-field modulation strategy. The incoming low-frequency signal mixes with the auxiliary field, and together they induce Stark shifts of the Rydberg level. These shifts are mapped onto the probe laser via electromagnetically induced transparency (EIT), in a manner analogous to heterodyne detection. We demonstrate a sensitivity of 7.5±2.6μV/(cm⋅Hz1/2) at 5 kHz and a minimal detectable field of 0.26±0.04μV/cm with an integration time of 1000 s. Furthermore, we extend this approach to systematically analyze the performance of generalized auxiliary fields containing multiple frequency components. By virtue of modulated auxiliary field and quantum frequency mixing, our results establish a robust and systematic framework for quantum sensing of low-frequency electric fields with Rydberg atoms, offering improved sensitivity, stability, and immunity to environmental drifts.
Rydberg atoms are neutral atoms excited to high principal quantum number states, which endows them with exaggerated properties such as large electric dipole moments, long lifetimes, and extreme sensitivity to external electromagnetic fields. These characteristics form the foundation of Rydberg atom-based sensors, an emerging class of quantum devices capable of optically detecting electric fields across frequencies from DC to the terahertz regime. Rydberg-based electrometry operates through both Autler–Townes (AT) splitting of resonant Rydberg transitions and Stark-shift measurements for high-frequency or far-detuned fields, enabling broadband field sensing from DC to the THz regime. Using ladder-type electromagnetically induced transparency (EIT) and AT splitting, these sensors enable non-invasive, SI-traceable measurements of field amplitude, frequency, phase, and polarization. Recent developments have demonstrated broadband electric field probes, voltage calibration standards, and compact RF receivers based on thermal vapor cells and integrated photonic architectures. Furthermore, innovations in multi-photon EIT, superheterodyne readout, and multi wave mixing have expanded the dynamic range and bandwidth of Rydberg-based electrometry. Despite challenges related to environmental perturbations, linewidth broadening, and laser stabilization, ongoing advances in atomic control, hybrid photonic integration, and EIT-based readout promise scalable, chip-compatible sensors. This review summarizes the physical principles, experimental progress, and emerging applications of Rydberg atom-based sensing, emphasizing their potential for next generation quantum metrology, wireless communication, and precision field mapping.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
We demonstrate the measurement of super low-frequency electric field using Rydberg atoms in an atomic vapor cell with inside parallel electrodes, thus overcoming the low-frequency electric-field-screening effect at frequencies below a few kHz. Rydberg electromagnetically induced transparency (EIT) spectra involving 52 D 5/2 state is employed to measure the signal electric field. An auxiliary DC field is applied to improve the sensitivity. A DC Stark map is demonstrated, where the utilized 52 D 5/2 exhibits m j = 1/2, 3/2, 5/2 Stark shifts and splittings. The m j = 1/2 state is employed to detect the signal field because of its larger polarizability than that of m j = 3/2, 5/2. Also, we show that the strength of the spectrum is dependent on the angle between the laser polarizations and the electric field. With optimization of the applied DC field to shift the m j = 1/2 Rydberg energy level to a high sensitivity region and the laser polarizations to obtain the maximum m j = 1/2 signal, we achieve the detection of the signal electric field with a frequency of 100 Hz down to 214.8 µ V/cm with a sensitivity of 67.9 µ V cm −1 Hz −1/2 , and the linear dynamic range is over 37 dB. Our work extends the measurement frequency of Rydberg sensors to super low frequency with high sensitivity, which has the advantages of high sensitivity and miniaturization for receiving super low frequency.
Rydberg-atom electrometry promises a radiofrequency (RF) receiver front end with intrinsic self-calibration, all-optical readout, and freedom from conventional antenna constraints. However, existing studies largely address isolated physical effects—local susceptibility, spectral fitting, or a single observable–so a unified engineering description that links device physics to communication performance is still lacking. This work develops a system-level design framework that treats the Rydberg vapor cell as an RF receiver and connects the incident field to the electrical output along a single analytic chain. A closed-form static input–output map is obtained by combining a four-level continued-fraction susceptibility, Beer–Lambert propagation, and direct photodetection. Small-signal linearization yields a thirdorder complex-valued state-space model whose physical transfer function, because the photocurrent is a real projection of a complex coherence, must be assembled from both positive- and negative-frequency resolvent responses—a construction that has no counterpart in real-valued linear systems and is material for bandwidth prediction, which we show can otherwise be misestimated by up to a factor of two to three. A multisource noise model then defines a frequency-dependent minimum detectable field, exposing how static gain, spectral roll-off, and technical noise jointly bound sensitivity. The framework yields explicit reception limits for amplitude, frequency, and on–offkeyed modulation, unifies biased direct detection with superheterodyne operation, provides quantitative engineering design maps for bandwidth, sensitivity, and dynamic range, and is benchmarked against published87Rb and133Cs experiments, reproducing the measured calibration slope to within 2% and the reported bandwidth scale to order of magnitude.