Superconducting circuits incorporating Josephson elements represent a promising hardware platform for quantum technologies. Potential applications include scalable quantum computing, microwave quantum networks, and quantum-limited amplifiers. However, progress in Josephson junction–based quantum technologies is facing the ongoing challenge of minimizing loss channels. This is also true for parametric superconducting devices based on nonlinear Josephson resonators. In this work, we report on the fabrication and characterization of low-loss Josephson parametric devices operated in the GHz frequency range, showing record internal quality factors. Specifically, we achieve internal quality factors Q int significantly exceeding 10 5 for both Josephson parametric converters and Josephson parametric amplifiers in the single-photon regime by fitting the scattering data. We confirm the extracted Q int values by analyzing purity of squeezed vacuum states generated by these devices. These low-loss devices mark a significant step forward in realizing high-performance quantum circuits, enabling further advancements in superconducting quantum technologies.
Superconducting circuits incorporating Josephson elements represent a promising hardware platform for quantum technologies. Potential applications include scalable quantum computing, microwave quantum networks, and quantum-limited amplifiers. However, progress in Josephson junction–based quantum technologies is facing the ongoing challenge of minimizing loss channels. This is also true for parametric superconducting devices based on nonlinear Josephson resonators. In this work, we report on the fabrication and characterization of low-loss Josephson parametric devices operated in the GHz frequency range, showing record internal quality factors. Specifically, we achieve internal quality factors Q int significantly exceeding 10 5 for both Josephson parametric converters and Josephson parametric amplifiers in the single-photon regime by fitting the scattering data. We confirm the extracted Q int values by analyzing purity of squeezed vacuum states generated by these devices. These low-loss devices mark a significant step forward in realizing high-performance quantum circuits, enabling further advancements in superconducting quantum technologies.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.
Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.
Due to their unique properties as lossless, nonlinear circuit elements, Josephson junctions lie at the heart of superconducting quantum information processing. Previously, we demonstrated a two-layer, submicrometer-scale overlap junction fabrication process suitable for qubits with long coherence times. Here, we extend the overlap junction fabrication process to micrometer-scale junctions. This allows us to fabricate other superconducting quantum devices. For example, we demonstrate an overlap-junction-based Josephson parametric amplifier that uses only 2 layers. This efficient fabrication process yields frequency-tunable devices with negligible insertion loss and a gain of ~ 30 dB. Compared to other processes, the overlap junction allows for fabrication with minimal infrastructure, high yield, and state-of-the-art device performance.
Quantum-limited parametric amplifiers have become increasingly interesting and relevant with the progressing field of quantum computing. However, currently it is still challenging to fabricate these complex devices. In this thesis, we developed cross type Josephson junctions (JJs), lumped element LC resonators, lumped element Josephson parametric amplifiers (JPAs) and Josephson traveling wave parametric amplifiers (JTWPAs). We found and resolved several fabrication issues however we suspect that both the JPA and JTWPA suffered from microshorts in the circuits during the cryogenic measurements. Nevertheless, we managed to measure the resonance frequency of the JPA and have noticed the flux focusing effect when we flux tune it. We preformed room temperature measurements on over 300 JJs and calculated the relative standard deviation (RSD) for various JJ sizes. We found the spread of 30 fabricated resonators and a rough estimate of their Q factors. The JTWPAs developed are non-degenerate four wave mixing amplifiers that use the resonant phase matching (RPM) technique to reduce the phase mismatch problem. The transmission through the measured JTWPA showed 50 dB loss probably caused by presumably a short from the transmission line to ground. However, when the JTWPA was driven with a pump we observed 20 dB increase in transmission in some frequency bands.
The performance and scalability of superconducting quantum circuits depends critically on the microwave environment. Minimizing signal reflections and suppressing thermal noise are essential for achieving high-fidelity readout and preserving qubit coherence. A significant challenge arises from the use of conventional cryogenic components such as isolators and circulators, which exhibit nonideal out-of-band reflection characteristics. Reflections degrade impedance matching and limit the performance of broadband quantum limited amplifiers. Superconducting implementations of reflectionless microwave filters offer a promising solution to mitigate these issues. The focus of this work is the fabrication and cryogenic characterization of reflectionless filters compatible with superconducting qubit fabrication flows. Devices were implemented on high resistivity silicon substrates using aluminum ground planes, integrated nichrome resistors, and crossovers formed with SiO2 interlayer dielectric. Cryogenic measurements at 20 mK demonstrate high return loss, confirming the viability of these filters for co-fabrication with traveling-wave parametric amplifiers (TWPAs) and circuit quantum electrodynamics (cQED) architectures. The filters exhibit low insertion loss in the passband to maintain quantum measurement efficiency and provide broadband reflection suppression across frequencies relevant to superconducting qubits, offering a scalable way to manage microwave noise in superconducting quantum processors.
Superconducting parametric amplifiers (SPAs) are critical components for ultralow-noise qubit readout in quantum computing, addressing the critical challenge of amplifying weak quantum signals without introducing noise that degrades coherence and computational fidelity. Unlike classical amplifiers, SPAs can achieve or closely approach quantum-limited performance, specifically the Standard Quantum Limit (SQL) of half a photon of added noise for phase-preserving amplification. The core principle of SPAs relies on parametric amplification, where energy is transferred from a strong pump tone to a weak input signal through non-dissipative nonlinear mixing processes. This is enabled by intrinsic nonlinearities in superconducting materials, primarily kinetic inductance in thin films (e.g., NbTiN, Al) and, more significantly, the Josephson effect in Josephson junctions. These nonlinear elements facilitate frequency mixing (three-wave or four-wave mixing) and can operate in phase-preserving or phase-sensitive amplification modes, with the latter allowing for noise squeezing below the SQL. This chapter emphasizes the significant role of resonator design in determining critical SPA performance metrics such as gain, bandwidth, and noise characteristics. It details both lumped-element (LC) and distributed-element (coplanar waveguide, CPW) resonators, discussing their unique properties, suitability for different frequency ranges, and the importance of achieving high-quality factors (Q) for efficient energy storage and minimal loss. A practical design and simulation of a meandered quarterwavelength CPW resonator coupled to a feed line is presented, illustrating how precise control over geometric parameters optimizes resonant frequency, coupling strength, and quality factor for high-fidelity qubit state discrimination.