Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.14440 · Physical Review A

First-order thermal insensitivity of the frequency of a narrow spectral hole in a crystal

Shuo Zhang, Signe Louise Seidelin, Rodolphe Le Targat, Philippe Goldner, Bess Fang, Yann Le Coq

Published Jan 23, 2023• 6 citations
arXivHTMLPDF

Abstract

The possibility of generating a narrow spectral hole in a rare-earth doped crystal opens the gateway to a variety of applications, one of which is the realization of an ultrastable laser. As this is achieved by locking in a prestabilized laser to the narrow hole, a prerequisite is the elimination of frequency fluctuations of the spectral hole. One potential source of such fluctuations can arise from temperature instabilities. However, when the crystal is surrounded by a buffer gas subject to the same temperature as the crystal, the effect of temperature-induced pressure changes may be used to counterbalance the direct effect of temperature fluctuations. For a particular pressure, it is indeed possible to identify a temperature for which the spectral hole resonant frequency is independent of the first-order thermal fluctuations. Here, we measure frequency shifts as a function of temperature for different values of the pressure of the surrounding buffer gas, and identify the ``magic'' environment within which the spectral hole is largely insensitive to temperature.

DOI
10.1103/physreva.107.013518

Related papers

Shifts of optical frequency references based on spectral-hole burning in Eu3+:Y2SiO5

Michael J. Thorpe, David R. Leibrandt, Till Rosenband

Several properties of Eu 3+ :Y 2 SiO 5 spectral holes are measured, to assess the suitability of broad-band hole-patterns for use as laser-frequency references. We measure frequency shifts due to magnetic fields, side-features of neighboring spectral holes and changing optical probe power. A precise calibration of a temperature insensitive point is also performed, where the temperature-induced frequency shift is canceled to first order by the pressure-induced shift from the crystal's helium-gas environment.

arXiv:1210.4458•New Journal of Physics•Mar 6, 2013•40 citations

Spectral Hole Burning for Ultra-stable Lasers

Shuo Zhang, Nemanja Lučić, Nicolas Galland +6 more

Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•2 citations

Anomalous Subkelvin Thermal Frequency Shifts of Ultranarrow Linewidth Solid State Emitters

Xiuji Lin, M. T. Hartman, Benjamin Pointard +5 more

We investigate the frequency response of narrow spectral holes in a doped crystal structure as a function of temperature below 1 K. We identify a particular regime in which this response significantly deviates from the expected two-phonon Raman scattering theory. Namely, near 290 mK, we observed a behavior exhibiting a temperature-dependent frequency shift of zero to first order. This is of particular interest for applications that require high frequency stability, such as laser frequency stabilization, as by operating the scheme at this specific point would result in the spectral hole frequency being highly immune to temperature fluctuations, providing the potential for a laser fractional frequency instability as low as ∼2×10^{-22} at 1 s.

arXiv:2411.16687•Physical Review Letters•Oct 29, 2024•6 citations

Spectral Hole Burning for Ultra-stable Lasers

Nicolas Galland, Signe Louise Seidelin, Alban Ferrier +7 more

We report on the measurement of uniaxial stress sensitivities of the spectral holes in rare earth doped crystal. This provides the necessary information for ab initio calculation of the acceleration sensitivity for a given crystal geometry, and provides the necessary base for optimizing the mounting of the crystal so as to decrease the vibration induced frequency instability. Furthermore, we report on a novel double heterodyne detection scheme which we have shown can be used to decrease the detection noise when locking a laser to the central frequency of a spectral hole, and thereby allows us to obtain a laser with fractional frequency instability of 1.7×10-15@ 1 s.

Joint Conference of the IEEE International Frequency Control Symposium and International Symposium on Applications of Ferroelectrics (IFCS-ISAF)•Jul 1, 2020•0 citations

Sub-Kelvin Spectral Hole Burning in Eu:YSO for Laser Frequency Stabilisation

A Robbes, Y Yuan, Philippe Goldner +4 more

As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.

•Sep 16, 2025•0 citations

Double-heterodyne probing for an ultra-stable laser based on spectral hole burning in a rare-earth-doped crystal

Nicolas Galland, Nemanja Lučić, S. Zhang +7 more

We present an experimental technique for realizing a specific absorption spectral pattern in a rare-earth-doped crystal at cryogenic temperatures. This pattern is subsequently probed on two spectral channels simultaneously, thereby producing an error signal allowing frequency locking of a laser on the said spectral pattern. Appropriate combination of the two channels leads to a substantial reduction in detection noise, paving the way to realizing an ultra-stable laser for which the detection noise can be made arbitrarily low when using multiple channels. We use this technique to realize a laser with a frequency instability of 1.7 × 1 0 − 15 at 1 s, not limited by the detection noise but by environmental perturbation of the crystal. This is comparable with the lowest instability demonstrated at 1 s to date for rare-earth-doped crystal stabilized lasers.

arXiv:2004.01752•Optics Letters•Feb 28, 2020•24 citations
The possibility of generating a narrow spectral hole in a rare-earth doped crystal opens the gateway to a variety of applications, one of which is the realization of an ultrastable laser. As this is achieved by locking in a prestabilized laser to the narrow hole, a prerequisite is the elimination of frequency fluctuations of the spectral hole. One potential source of such fluctuations can arise from temperature instabilities. However, when the crystal is surrounded by a buffer gas subject to the same temperature as the crystal, the effect of temperature-induced pressure changes may be used to counterbalance the direct effect of temperature fluctuations. For a particular pressure, it is indeed possible to identify a temperature for which the spectral hole resonant frequency is independent of the first-order thermal fluctuations. Here, we measure frequency shifts as a function of temperature for different values of the pressure of the surrounding buffer gas, and identify the ``magic'' environment within which the spectral hole is largely insensitive to temperature.
Several properties of Eu 3+ :Y 2 SiO 5 spectral holes are measured, to assess the suitability of broad-band hole-patterns for use as laser-frequency references. We measure frequency shifts due to magnetic fields, side-features of neighboring spectral holes and changing optical probe power. A precise calibration of a temperature insensitive point is also performed, where the temperature-induced frequency shift is canceled to first order by the pressure-induced shift from the crystal's helium-gas environment.
Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.
We investigate the frequency response of narrow spectral holes in a doped crystal structure as a function of temperature below 1 K. We identify a particular regime in which this response significantly deviates from the expected two-phonon Raman scattering theory. Namely, near 290 mK, we observed a behavior exhibiting a temperature-dependent frequency shift of zero to first order. This is of particular interest for applications that require high frequency stability, such as laser frequency stabilization, as by operating the scheme at this specific point would result in the spectral hole frequency being highly immune to temperature fluctuations, providing the potential for a laser fractional frequency instability as low as ∼2×10^{-22} at 1 s.
We report on the measurement of uniaxial stress sensitivities of the spectral holes in rare earth doped crystal. This provides the necessary information for ab initio calculation of the acceleration sensitivity for a given crystal geometry, and provides the necessary base for optimizing the mounting of the crystal so as to decrease the vibration induced frequency instability. Furthermore, we report on a novel double heterodyne detection scheme which we have shown can be used to decrease the detection noise when locking a laser to the central frequency of a spectral hole, and thereby allows us to obtain a laser with fractional frequency instability of 1.7×10-15@ 1 s.
As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.
We present an experimental technique for realizing a specific absorption spectral pattern in a rare-earth-doped crystal at cryogenic temperatures. This pattern is subsequently probed on two spectral channels simultaneously, thereby producing an error signal allowing frequency locking of a laser on the said spectral pattern. Appropriate combination of the two channels leads to a substantial reduction in detection noise, paving the way to realizing an ultra-stable laser for which the detection noise can be made arbitrarily low when using multiple channels. We use this technique to realize a laser with a frequency instability of 1.7 × 1 0 − 15 at 1 s, not limited by the detection noise but by environmental perturbation of the crystal. This is comparable with the lowest instability demonstrated at 1 s to date for rare-earth-doped crystal stabilized lasers.