Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2409.10222 · Physical Review A

Intracavity squeezing for a Kerr quantum nondemolition measurement scheme

Dariya Salykina, Stepan N. Balybin, Farid Ya Khalili

Published Jan 23, 2025• 2 citations
arXivHTMLPDF

Abstract

In the work by Balybin et al. [Phys. Rev. A 108, 053708 (2023)], the scheme of quantum nondemolition measurement of optical quanta that uses a resonantly enhanced Kerr nonlinearity in the optical microresonator, presqueezing of the probe beam, and its parametric amplification before the detection was analyzed theoretically. It was shown that the main factor that limits the sensitivity of the considered scheme is the interplay of optical losses and the nonlinear self-phase modulation (SPM) effect. Here we show that using the intracavity squeezing of the probe beam in this scheme, it is possible to cancel out the SPM effect. In this case, the sensitivity will be limited only by the available power in the pump beam and by the input/output losses in the signal beam. Our estimates show that using the best optical microresonators currently available, the sensitivity for the intracavity photon number approaching the single-photon one can be achieved. Therefore, this scheme could be of interest for optical quantum information processing tasks.

DOI
10.1103/physreva.111.013715

Related papers

Improving the sensitivity of Kerr quantum nondemolition measurement via squeezed light

Stepan N. Balybin, Dariya Salykina, Farid Ya Khalili

In S. N. Balybin et al. [Phys. Rev. A 106, 013720 (2022)] the scheme of quantum nondemolition measurement of optical quanta that uses a resonantly enhanced Kerr nonlinearity in optical microresonators was analyzed theoretically. It was shown that using modern high-$Q$ microresonators, it is possible to achieve sensitivity several times better than the standard quantum limit. Here we propose and analyze in detail a significantly improved version of that scheme. We show that by using a squeezed quantum state of the probe beam and the antisqueezing (parametric amplification) of this beam at the output of the microresonator, it is possible to reduce the measurement imprecision by about one order of magnitude. The resulting sensitivity allows us to generate and verify multiphoton non-Gaussian quantum states of light, making the scheme considered here interesting for quantum information processing tasks.

arXiv:2210.00857•Physical Review A•Nov 13, 2023•4 citations

Application of optical squeezing to microresonator based optical sensors

Dariya Salykina, Daniil Shakhbaziants, Igor Bilenko +1 more

High-Q optical microresonators combine low losses and high optical energy concentration in a small effective mode volume, making them an attractive platform for optical sensors. While light is confined in the microresonator by total internal reflection, a portion of the optical field, known as the evanescent field, extends outside. This makes the mode's resonant frequency sensitive to changes in the surrounding environment. In this work, we explore the quantum sensitivity limits of this type of sensors. We show that using the intracavity squeezing of the light in the microresonator, it is possible to suppress the influence of the optical losses and cancel the undesirable self phase modulation effect, originating from the cubic non-linearity of the microresonators media. As a result, the sensitivity surpassing the shot noise limit can be achieved. An additional sensitivity gain can be obtained by preparing the input light in a squeezed quantum state.

quant-pharXiv:2511.12138•Nov 18, 2025•1 citation

Practical design of the optical lever intracavity topology of gravitational-wave detectors

S. L. Danilishin, F. Ya. Khalili

The quantum nondemolition (QND) intracavity topologies of gravitational-wave detectors proposed several years ago allow us, in principle, to obtain sensitivity significantly better than the standard quantum limit using relatively small amount of optical pumping power. In this article we consider an improved more practical version of the optical lever intracavity scheme. It differs from the original version by the symmetry which allows to suppress influence of the input light amplitude fluctuation. In addition, it provides the means to inject optical pumping inside the scheme without increase of optical losses. We consider also sensitivity limitations imposed by the local meter which is the key element of the intracavity topologies. Two variants of the local meter are analyzed, which are based on the spectral variation measurement and on the discrete sampling variation measurement, correspondingly. The former one, while can not be considered as a candidate for a practical implementation, allows, in principle, to obtain the best sensitivity and thus can be considered as an ideal ``asymptotic case'' for all other schemes. The DSVM-based local meter can be considered as a realistic scheme but its sensitivity, unfortunately, is by far not so good just due to a couple of peculiar numeric factors specific for this scheme. From our point of view search of new methods of mechanical QND measurements probably based on improved DSVM scheme or which combine the local meter with the pondermotive squeezing technique, is necessary.

arXiv:gr-qc/0508022•Physical review. D. Particles, fields, gravitation, and cosmology/Physical review. D. Particles and fields•Jan 19, 2006•19 citations

Quantum nondemolition measurements in optical cavities

P. M. Alsing, Gerard J Milburn, Daniel F. Walls

We analyze schemes for performing quantum nondemolition (QND) measurements in optical cavities. We consider three schemes: (1) measurement of a quadrature phase amplitude using a parametric process, (2) measurement of a quadrature phase amplitude using the optical Kerr effect in a nonlinear fiber, and (3) measurement of the photon number also using the Kerr effect in a fiber. We show that in the second scheme an enhancement of the QND effect may be obtained by making the cavity finesse for the signal larger than that for the probe.

Physical Review A•Apr 1, 1988•62 citations

Quantum Nondemolition Schemes using Second Order Nonlinearities

Robert M. Shelby, M. D. Levenson

Conventional devices for measuring the amplitude of a light wave absorb the light, thus destroying it. Recently, quantum nondemolition (QND) methods based on the optical Kerr effect have been shown capable of measuring optical amplitude fluctuations with near quantum-limited sensitivity.1 In these experiments, amplitude fluctuations of a signal beam are transferred to the phase fluctuation quadrature of a probe beam which co-propagates with the signal beam, by the intensity-dependent refractive index, without absorption of the signal beam. A pure Kerr nonlinearity can cause only phase modulation of the light wave, and the amplitude of the signal wave is preserved. Such methods should more properly be called back-action evading measurement schemes since the quantity being measured is not perturbed by the back-action that quantum mechanics requires for any measurement. The signal-to-noise ratio achieved in these experiments was limited by the small magnitude of the Kerr nonlinearity relative to the excess phase noise imposed on the probe beam by thermal light scattering processes in the glass fibers that were employed.

•Jul 18, 1988•0 citations

Quantum nondemolition measurements of photon number in monolithic microcavities

Stepan N. Balybin, Andrey B. Matsko, Farid Ya Khalili +5 more

We revisit the idea of quantum nondemolition measurement (QND) of optical quanta via a resonantly enhanced Kerr nonlinearity taking into account quantum backaction. We show that the monolithic microcavities enable QND measurement of the number of quanta in a weak signal field using a classical probe field spatially overlapping with the signal. The phase of the probe field acquires information about the signal number of quanta without altering it due to the cross-phase modulation effect. We find the exact solution to the Heisenberg equations of motion of this system and calculate the measurement error, accounting for the optical losses in the measurement path. We identify a realistic approximation to obtain the explicit form of the final conditional quantum state of the signal field, accounting for the undesirable self-phase modulation effect and designing the optimal homodyne measurement of the probe beam to evade this effect. We show that the best modern monolithic microcavities allow achieving the measurement imprecision several times better than the standard quantum limit.

arXiv:2111.14700•Physical Review A•Jul 28, 2022•10 citations
In the work by Balybin et al. [Phys. Rev. A 108, 053708 (2023)], the scheme of quantum nondemolition measurement of optical quanta that uses a resonantly enhanced Kerr nonlinearity in the optical microresonator, presqueezing of the probe beam, and its parametric amplification before the detection was analyzed theoretically. It was shown that the main factor that limits the sensitivity of the considered scheme is the interplay of optical losses and the nonlinear self-phase modulation (SPM) effect. Here we show that using the intracavity squeezing of the probe beam in this scheme, it is possible to cancel out the SPM effect. In this case, the sensitivity will be limited only by the available power in the pump beam and by the input/output losses in the signal beam. Our estimates show that using the best optical microresonators currently available, the sensitivity for the intracavity photon number approaching the single-photon one can be achieved. Therefore, this scheme could be of interest for optical quantum information processing tasks.
In S. N. Balybin et al. [Phys. Rev. A 106, 013720 (2022)] the scheme of quantum nondemolition measurement of optical quanta that uses a resonantly enhanced Kerr nonlinearity in optical microresonators was analyzed theoretically. It was shown that using modern high-QQQ microresonators, it is possible to achieve sensitivity several times better than the standard quantum limit. Here we propose and analyze in detail a significantly improved version of that scheme. We show that by using a squeezed quantum state of the probe beam and the antisqueezing (parametric amplification) of this beam at the output of the microresonator, it is possible to reduce the measurement imprecision by about one order of magnitude. The resulting sensitivity allows us to generate and verify multiphoton non-Gaussian quantum states of light, making the scheme considered here interesting for quantum information processing tasks.
High-Q optical microresonators combine low losses and high optical energy concentration in a small effective mode volume, making them an attractive platform for optical sensors. While light is confined in the microresonator by total internal reflection, a portion of the optical field, known as the evanescent field, extends outside. This makes the mode's resonant frequency sensitive to changes in the surrounding environment. In this work, we explore the quantum sensitivity limits of this type of sensors. We show that using the intracavity squeezing of the light in the microresonator, it is possible to suppress the influence of the optical losses and cancel the undesirable self phase modulation effect, originating from the cubic non-linearity of the microresonators media. As a result, the sensitivity surpassing the shot noise limit can be achieved. An additional sensitivity gain can be obtained by preparing the input light in a squeezed quantum state.
The quantum nondemolition (QND) intracavity topologies of gravitational-wave detectors proposed several years ago allow us, in principle, to obtain sensitivity significantly better than the standard quantum limit using relatively small amount of optical pumping power. In this article we consider an improved more practical version of the optical lever intracavity scheme. It differs from the original version by the symmetry which allows to suppress influence of the input light amplitude fluctuation. In addition, it provides the means to inject optical pumping inside the scheme without increase of optical losses. We consider also sensitivity limitations imposed by the local meter which is the key element of the intracavity topologies. Two variants of the local meter are analyzed, which are based on the spectral variation measurement and on the discrete sampling variation measurement, correspondingly. The former one, while can not be considered as a candidate for a practical implementation, allows, in principle, to obtain the best sensitivity and thus can be considered as an ideal ``asymptotic case'' for all other schemes. The DSVM-based local meter can be considered as a realistic scheme but its sensitivity, unfortunately, is by far not so good just due to a couple of peculiar numeric factors specific for this scheme. From our point of view search of new methods of mechanical QND measurements probably based on improved DSVM scheme or which combine the local meter with the pondermotive squeezing technique, is necessary.
We analyze schemes for performing quantum nondemolition (QND) measurements in optical cavities. We consider three schemes: (1) measurement of a quadrature phase amplitude using a parametric process, (2) measurement of a quadrature phase amplitude using the optical Kerr effect in a nonlinear fiber, and (3) measurement of the photon number also using the Kerr effect in a fiber. We show that in the second scheme an enhancement of the QND effect may be obtained by making the cavity finesse for the signal larger than that for the probe.
Conventional devices for measuring the amplitude of a light wave absorb the light, thus destroying it. Recently, quantum nondemolition (QND) methods based on the optical Kerr effect have been shown capable of measuring optical amplitude fluctuations with near quantum-limited sensitivity.1 In these experiments, amplitude fluctuations of a signal beam are transferred to the phase fluctuation quadrature of a probe beam which co-propagates with the signal beam, by the intensity-dependent refractive index, without absorption of the signal beam. A pure Kerr nonlinearity can cause only phase modulation of the light wave, and the amplitude of the signal wave is preserved. Such methods should more properly be called back-action evading measurement schemes since the quantity being measured is not perturbed by the back-action that quantum mechanics requires for any measurement. The signal-to-noise ratio achieved in these experiments was limited by the small magnitude of the Kerr nonlinearity relative to the excess phase noise imposed on the probe beam by thermal light scattering processes in the glass fibers that were employed.
We revisit the idea of quantum nondemolition measurement (QND) of optical quanta via a resonantly enhanced Kerr nonlinearity taking into account quantum backaction. We show that the monolithic microcavities enable QND measurement of the number of quanta in a weak signal field using a classical probe field spatially overlapping with the signal. The phase of the probe field acquires information about the signal number of quanta without altering it due to the cross-phase modulation effect. We find the exact solution to the Heisenberg equations of motion of this system and calculate the measurement error, accounting for the optical losses in the measurement path. We identify a realistic approximation to obtain the explicit form of the final conditional quantum state of the signal field, accounting for the undesirable self-phase modulation effect and designing the optimal homodyne measurement of the probe beam to evade this effect. We show that the best modern monolithic microcavities allow achieving the measurement imprecision several times better than the standard quantum limit.