Qubit frequency shifts, which often contain information about a target environment variable, are detected with Ramsey interference measurements. Unfortunately, the sensitivity of this protocol is limited by decoherence. We introduce a new protocol to enhance the sensitivity of a qubit frequency measurement in the presence of decoherence by applying a continuous drive to stabilize one component of the Bloch vector. We demonstrate our protocol on a superconducting qubit, enhancing sensitivity per measurement shot by 1.65 × and sensitivity per qubit evolution time by 1.09 × compared to Ramsey. We also explore the protocol theoretically, finding unconditional enhancements compared to Ramsey interferometry and maximum enhancements of 1.96 × and 1.18 × , respectively. Additionally, our protocol is robust to parameter miscalibrations. It requires no feedback and no extra control or measurement resources, and can be immediately applied in a wide variety of quantum computing and quantum sensor technologies. Ramsey interferometry is widely used in quantum sensing for precise qubit frequency measurements, but its sensitivity is limited by decoherence. Hecht et al. report a new protocol for detecting qubit frequency shifts in a decohering system which has enhanced sensitivity and is applicable to existing technologies.
Qubit frequency shifts, which often contain information about a target environment variable, are detected with Ramsey interference measurements. Unfortunately, the sensitivity of this protocol is limited by decoherence. We introduce a new protocol to enhance the sensitivity of a qubit frequency measurement in the presence of decoherence by applying a continuous drive to stabilize one component of the Bloch vector. We demonstrate our protocol on a superconducting qubit, enhancing sensitivity per measurement shot by 1.65 × and sensitivity per qubit evolution time by 1.09 × compared to Ramsey. We also explore the protocol theoretically, finding unconditional enhancements compared to Ramsey interferometry and maximum enhancements of 1.96 × and 1.18 × , respectively. Additionally, our protocol is robust to parameter miscalibrations. It requires no feedback and no extra control or measurement resources, and can be immediately applied in a wide variety of quantum computing and quantum sensor technologies. Ramsey interferometry is widely used in quantum sensing for precise qubit frequency measurements, but its sensitivity is limited by decoherence. Hecht et al. report a new protocol for detecting qubit frequency shifts in a decohering system which has enhanced sensitivity and is applicable to existing technologies.
Ramsey interferometry is a widely used tool for precisely measuring transition frequencies between two energy levels of a quantum system, with applications in time keeping, precision spectroscopy, quantum optics, and quantum information. Often, the coherence time of the quantum system surpasses the one of the oscillator probing the system, thereby limiting the interrogation time and associated spectral resolution. Correlation spectroscopy overcomes this limitation by probing two quantum systems with the same noisy oscillator for a measurement of their transition frequency difference; this technique has enabled very precise comparisons of atomic clocks. Here, we extend correlation spectroscopy to the case of multiple quantum systems undergoing strong correlated dephasing. We model Ramsey correlation spectroscopy with N particles as a multiparameter phase estimation problem and demonstrate that multiparticle correlations can assist in reducing the measurement uncertainties even in the absence of entanglement. We derive precision limits and optimal sensing techniques for this problem and compare the performance of probe states and measurement with and without entanglement. Using one- and two-dimensional ion Coulomb crystals with up to 91 qubits, we experimentally demonstrate the advantage of measuring multiparticle correlations for reducing phase uncertainties and apply correlation spectroscopy to measure ion-ion distances, transition frequency shifts, laser-ion detunings, and path-length fluctuations. Our method can be straightforwardly implemented in experimental setups with globally coherent qubit control and qubit-resolved single-shot readout and is, thus, applicable to other physical systems such as neutral atoms in tweezer arrays. Published by the American Physical Society 2024
A measurement of a single-qubit quantum sensor reveals at most 1 bit of information about the signal that was sensed. To perform a classification task on the signal, the conventional approach is to repeat a sensing protocol many times, averaging the measurement results to obtain a high-precision estimate of the sensed signal, and then to apply classical postprocessing. Quantum computational sensing (QCS) is an alternative approach that breaks with the paradigm of first obtaining a classical estimate of the signal and then computing a function of the estimated signal in postprocessing. QCS instead combines quantum sensing with quantum computing to concentrate information about the signal relevant to the task into the solitary bit revealed by each measurement. Here, we report on the experimental demonstration of QCS where sensing and computing were both performed by the same single superconducting transmon qubit. We consider various binary classification tasks based on static and oscillating magnetic fields induced by current through a flux line. The fields were sensed through a double-junction superconducting quantum interference device (SQUID) loop that was part of the qubit. We used a protocol based on quantum signal processing to preprocess the sensed signals in the quantum domain prior to measurement. For tasks on static magnetic fields, our protocol outperformed the conventional baseline of Ramsey-based phase estimation by as much as 15 percentage points. For tasks on oscillating magnetic fields, we classified signal amplitude and frequency with up to 20 and 15 percentage points higher accuracy, respectively, compared to the conventional baseline of optimized dynamical-decoupling protocols. Our results illustrate how quantum computing can enhance quantum sensing even with a minimally sized quantum system subject to the practical limitations of decoherence and error-prone operations.
This paper investigates the critical challenge of decoherence in quantum systems, a primary impediment to achieving robust quantum information processing. We propose a novel approach utilizing a high-precision quantum sensor array to dynamically assess and control decoherence sensitivity in real-time. The core mechanism involves precisely measuring decoherence parameters – frequency, intensity, and duration – using microwave or infrared arrays. This data is then fed into a feedback control system designed to mitigate or counteract the effects of decoherence, ultimately aiming for ultra-high fidelity quantum storage and computation. The presented methodology represents a significant advancement over existing, largely indirect, decoherence sensitivity assessment techniques, offering a pathway toward more reliable and scalable quantum technologies. The research focuses on the development of a system capable of not just measuring, but actively managing decoherence, a fundamental requirement for practical quantum applications. The key innovation lies in the integration of precise measurement and real-time feedback control, enabling a level of control previously unattainable.
In this thesis work, the quantum behavior of a superconducting circuit implementing a quantum bit or qubit is studied. With the use of resonant microwave pulses the full manipulation of the quantum state of this system is demonstrated: any rotation of the state vector around the Bloch sphere can be achieved and by using particular NMR inspired sequences of microwave pulses, the robustness of an operation against particular types of errors, like slow fluctuations of the transition frequency of the qubit, can be improved. The phenomenon of decoherence which drives the system from a quantum behavior to a classical one, has been characterized in the free evolution regime. By properly tuning the working point in the external parameter space, the qubit can be decoupled to first order from the fluctuations of its environment, thus enhancing coherence. In these optimal conditions, low frequency charge noise probably of microscopic origin appears to be the limiting source of decoherence for our system. The study of decoherence during driven evolution demonstrated that by suppressing the effect of those fluctuations of the environment slower than that of the driving field, the coherence of the qubit can be improved. Finally a new non-dissipative readout method based on microwave reflectometry has been set up, which improves the sensitivity and could in principle lead to a non-demolition measurement of the qubit state.
Frequency estimation, a cornerstone of quantum metrology, has been significantly enhanced by advanced quantum sensing strategies. However, most protocols rely either on static or time-independent encoding mechanisms, inherently limiting their achievable precision scaling, or on control strategies requiring changing the Hamiltonian and/or implementing feedback mechanisms. To overcome this, we investigate a simpler dynamical encoding protocol where the quantum oscillator is driven by a general continuous temporal frequency modulation Ω(t)=ω0f(t). We analytically demonstrate that for a given modulation profile f(t) and its corresponding time-integral F(t), the quantum Fisher information (QFI) scales as O(F(t)2). This enhancement stems from the fact that temporal encoding fundamentally alters the mechanism of dynamical phase accumulation. Crucially, when evaluated under the energy and evolution-time constraints, this framework reveals a genuine precision enhancement over the conventional time-independent baseline. By analyzing explicit polynomial and exponential modulations, we establish that arbitrary precision scaling can be deterministically engineered, with ultimate bounds that are asymptotically saturable via optimal homodyne detection. Our framework provides a universal paradigm for exploiting time-dependent quantum control in next-generation sensors.
Abstract Sensing and metrology are crucial in both fundamental science and practical applications. They meet the constant demand for precise data, enabling more dependable assessments of theoretical models’ validity. Sensors, now a common feature in many fields, play a vital role in applications like gravity imaging, geology, navigation, security, timekeeping, spectroscopy, chemistry, magnetometry, healthcare, and medicine. The advancements in quantum technologies have sparked interest in employing quantum systems as sensors, offering enhanced capabilities and new possibilities. This article describes the optimization of the quantum-enhanced sensing of magnetic fluxes with a Kitaev phase estimation algorithm based on frequency tunable transmon qubits. It provides the optimal flux biasing point for sensors with different qubit transition frequencies and gives an estimation of decoherence rates and achievable sensitivity. The use of 2- and 3-qubit entangled states are compared in simulation with the single-qubit case. The flux sensing accuracy reaches 10 − 8 ⋅ Φ 0 and scales inversely with time, which proves the speed-up of sensing with high ultimate accuracy.