Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.11703 · Optics Express

Using slow light to enable laser frequency stabilization to a short, high-Q cavity

David Gustavsson, Marcus Lindén, Kevin J. Shortiss, Stefan Kröll, Andreas Walther, Adam Kinos, Lars Rippe

Published Nov 4, 2024• 5 citations
arXivHTMLPDF

Abstract

State-of-the-art laser frequency stabilization is limited by miniscule length changes caused by thermal noise. In this work, a cavity-length-insensitive frequency stabilization scheme is implemented using strong dispersion in a 21 mm long cavity with a europium-ion-doped spacer of yttrium orthosilicate. A number of limiting factors for slow light laser stabilization are evaluated, including the inhomogeneous and homogeneous linewidth of the ions, the deterioration of spectral windows, and the linewidth of the cavity modes. Using strong dispersion, the cavity modes were narrowed by a factor 1.6 × 10 5 , leading to a cavity linewidth of 3.0 kHz and a Q factor of 1.7 × 10 11 . Frequency stabilization was demonstrated using a cavity mode in a spectral transparency region near the center of the inhomogeneous profile, showing an overlapping Allan deviation below 6 × 10 −14 and a linear drift rate of 3.66 Hz s −1 . Considering improvements that could be implemented, this makes the europium-based slow light laser frequency reference a promising candidate for ultra-precise tabletop frequency stabilization.

DOI
10.1364/oe.540133

Related papers

Laser Stabilisation Using a Slow Light Cavity

Teodor Strömberg

In this thesis the application of slow light effects to the area of laser stabilisation is investigated. The frequency stability of lasers locked to external cavities is limited by the stability of the modes in the reference cavity. By using dispersive slow light effects the effective length of a cavity can be increased by several orders of magnitude, without a proportional increase in the sensitivity to fluctuations in cavity length, thereby yielding a net increase in stability. The effects are achieved through spectral hole burning in cryogenically cooled rare-earth ion doped crystals. Two sets of experiments are carried out, the first focusing on hole burning and the second focusing laser locking. Linewidths and frequency drift of the cavity spectrum are studied. Feedback control using an error signal generated from the slow light cavity is demonstrated, but successfully locking the laser is still yet to be achieved.

Lund reports on atomic physics•Jan 1, 2015•0 citations

Sub-Kelvin Spectral Hole Burning in Eu:YSO for Laser Frequency Stabilisation

A Robbes, Y Yuan, Philippe Goldner +4 more

As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.

•Sep 16, 2025•0 citations

Spectral Hole Burning for Ultra-stable Lasers

Shuo Zhang, Nemanja Lučić, Nicolas Galland +6 more

Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•2 citations

Laser stabilization at 1536 nm using regenerative spectral hole burning

Peter B. Sellin, Nick Strickland, Thomas Böttger +2 more

Laser frequency stabilization giving a 500-Hz Allan deviation for a 2-ms integration time with drift reduced to 7 kHz/min over several minutes was achieved at 1536 nm in the optical communication band. A continuously regenerated spectral hole in the inhomogeneously broadened ${}^{4}{I}_{15/2}{(1)}^{4}{I}_{13/2}(1)$ optical absorption of an ${\mathrm{Er}}^{3+}:{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}$ crystal was used as the short-term frequency reference, while a variation on the locking technique allowed simultaneous use of the inhomogeneously broadened absorption line as a long-term reference. The reported frequency stability was achieved without vibration isolation. Spectral hole burning frequency stabilization provides ideal laser sources for high-resolution spectroscopy, real-time optical signal processing, and a range of applications requiring ultra-narrow-band light sources or coherent detection; the time scale for stability and the compatibility with spectral hole burning devices make this technique complementary to other frequency references for laser stabilization.

Physical review. B, Condensed matter•Mar 30, 2001•54 citations

Three orders of magnitude cavity-linewidth narrowing by slow light in a rare-earth-ion-doped crystal cavity

Mahmood Sabooni, Qian Li, Lars Rippe +1 more

Three orders of magnitude cavity-linewidth narrowing in a rare-earth-ion-doped crystal cavity, induced by strong intra-cavity dispersion caused by off-resonant interaction with dopant ions is demonstrated. The strong dispersion is created by semi-permanent but rapidly reprogrammable changes of the rare earth absorption profiles using optical pumping techniques. Several cavity modes are shown within the spectral transmission window. Potential applications are discussed.

arXiv:1304.4456•Apr 16, 2013•29 citations

A Cavity-stabilized diode laser for dipole trapping of ytterbium

David Levonian

Bad-cavity lasers using a gain medium with a narrower linewidth than the laser cavity have the potential to achieve very narrow linewidths and extremely long coherence times.Such lasers could serve as active frequency standards or enable very-longbaseline interferometric telescopes at optical frequencies.The 6s6p 3 P 0 to 6s 21 S 0 ground state transition in 171 Yb is a promising candidate for the gain medium of a bad-cavity laser due to its 44 mHz linewidth.For ytterbium to be used efficiently as a gain medium, its inhomogeneous broadening must be suppressed to a level lower than the linewidth of its gain transition.In this thesis, I design, implement, and characterize an optical lattice trap for ytterbium atoms.The trap consists of a diode laser which is frequency stabilized to an adjustable-length cavity where the ytterbium atoms are trapped.The length of this cavity is then locked by comparison of the laser frequency to a stable reference cavity.The resulting standing wave has high enough intensity that the recoil energy of the gain transition is smaller than the energy spacing between motional modes of the trapped atoms.This situation is known as the Lamb-Dicke regime and means that there is an absence of recoil broadening.The large spacing between motional modes of the trap also enables sideband resolved cooling of the atoms, which allows cooling to temperatures of 3 𝜇𝐾, near the ground state of the trapping potential.Additionally, if the wavelength of the optical lattice is chosen to be at the magic wavelength for ytterbium, where the relative AC Stark shift for the two levels of the gain transition is zero to first order, there is no broadening due to varying intensity in the trap.Since the Doppler effect, recoil broadening and the AC Stark shift are the main sources of inhomogeneous broadening, this trapping scheme is expected to suppress inhomogeneous broadening to a level of 1 Hz.

•Jan 1, 2015•0 citations
State-of-the-art laser frequency stabilization is limited by miniscule length changes caused by thermal noise. In this work, a cavity-length-insensitive frequency stabilization scheme is implemented using strong dispersion in a 21 mm long cavity with a europium-ion-doped spacer of yttrium orthosilicate. A number of limiting factors for slow light laser stabilization are evaluated, including the inhomogeneous and homogeneous linewidth of the ions, the deterioration of spectral windows, and the linewidth of the cavity modes. Using strong dispersion, the cavity modes were narrowed by a factor 1.6 × 10 5 , leading to a cavity linewidth of 3.0 kHz and a Q factor of 1.7 × 10 11 . Frequency stabilization was demonstrated using a cavity mode in a spectral transparency region near the center of the inhomogeneous profile, showing an overlapping Allan deviation below 6 × 10 −14 and a linear drift rate of 3.66 Hz s −1 . Considering improvements that could be implemented, this makes the europium-based slow light laser frequency reference a promising candidate for ultra-precise tabletop frequency stabilization.
In this thesis the application of slow light effects to the area of laser stabilisation is investigated. The frequency stability of lasers locked to external cavities is limited by the stability of the modes in the reference cavity. By using dispersive slow light effects the effective length of a cavity can be increased by several orders of magnitude, without a proportional increase in the sensitivity to fluctuations in cavity length, thereby yielding a net increase in stability. The effects are achieved through spectral hole burning in cryogenically cooled rare-earth ion doped crystals. Two sets of experiments are carried out, the first focusing on hole burning and the second focusing laser locking. Linewidths and frequency drift of the cavity spectrum are studied. Feedback control using an error signal generated from the slow light cavity is demonstrated, but successfully locking the laser is still yet to be achieved.
As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.
Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.
Laser frequency stabilization giving a 500-Hz Allan deviation for a 2-ms integration time with drift reduced to 7 kHz/min over several minutes was achieved at 1536 nm in the optical communication band. A continuously regenerated spectral hole in the inhomogeneously broadened 4I15/2(1)4I13/2(1){}^{4}{I}_{15/2}{(1)}^{4}{I}_{13/2}(1)4I15/2​(1)4I13/2​(1) optical absorption of an Er3+:Y2SiO5{\mathrm{Er}}^{3+}:{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}Er3+:Y2​SiO5​ crystal was used as the short-term frequency reference, while a variation on the locking technique allowed simultaneous use of the inhomogeneously broadened absorption line as a long-term reference. The reported frequency stability was achieved without vibration isolation. Spectral hole burning frequency stabilization provides ideal laser sources for high-resolution spectroscopy, real-time optical signal processing, and a range of applications requiring ultra-narrow-band light sources or coherent detection; the time scale for stability and the compatibility with spectral hole burning devices make this technique complementary to other frequency references for laser stabilization.
Bad-cavity lasers using a gain medium with a narrower linewidth than the laser cavity have the potential to achieve very narrow linewidths and extremely long coherence times.Such lasers could serve as active frequency standards or enable very-longbaseline interferometric telescopes at optical frequencies.The 6s6p 3 P 0 to 6s 21 S 0 ground state transition in 171 Yb is a promising candidate for the gain medium of a bad-cavity laser due to its 44 mHz linewidth.For ytterbium to be used efficiently as a gain medium, its inhomogeneous broadening must be suppressed to a level lower than the linewidth of its gain transition.In this thesis, I design, implement, and characterize an optical lattice trap for ytterbium atoms.The trap consists of a diode laser which is frequency stabilized to an adjustable-length cavity where the ytterbium atoms are trapped.The length of this cavity is then locked by comparison of the laser frequency to a stable reference cavity.The resulting standing wave has high enough intensity that the recoil energy of the gain transition is smaller than the energy spacing between motional modes of the trapped atoms.This situation is known as the Lamb-Dicke regime and means that there is an absence of recoil broadening.The large spacing between motional modes of the trap also enables sideband resolved cooling of the atoms, which allows cooling to temperatures of 3 𝜇𝐾, near the ground state of the trapping potential.Additionally, if the wavelength of the optical lattice is chosen to be at the magic wavelength for ytterbium, where the relative AC Stark shift for the two levels of the gain transition is zero to first order, there is no broadening due to varying intensity in the trap.Since the Doppler effect, recoil broadening and the AC Stark shift are the main sources of inhomogeneous broadening, this trapping scheme is expected to suppress inhomogeneous broadening to a level of 1 Hz.