Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.06462 · Spintronics

Josephson tunnel junction arrays and Andreev weak links: what’s the difference?

A. Mert Bozkurt, Valla Fatemi

Published Sep 28, 2023• 6 citations
arXivHTMLPDF

Abstract

Josephson elements are cornerstones of cryogenic classical and quantum superconducting technology, owing to their nonlinearity. Two important types of Josephson elements are often considered distinct: the tunnel junction (superconductor-insulator-superconductor, SIS) and the normal weak link (superconductor-normalsuperconductor, SNS) referring to any non-superconducting and non-insulating central region. SNS junctions and SIS junctions have appeared in related technological and basic science contexts over the last decade. In this perspective article, we review correspondences between SISIS junctions and SNS junctions in limiting regimes, in which a single, general energy-phase relationship describes the systems. We show how this insight helped to connect recent bodies of theoretical and experimental work in both systems. We conclude by describing a few important differences that also impact their use in applied contexts.

DOI
10.1117/12.2678477

Related papers

Transport regimes in tunnel ferromagnetic Josephson junctions

R. Satariano, A. A. Golubov, E. Raja +13 more

We present a systematic study of the temperature-dependent transport properties of Nb- and Al-based superconductor--insulator--thin superconductor--ferromagnet--superconductor (SIsFS) Josephson junctions. By varying the superconducting material and the thickness of the intermediate superconducting layer, we identify three distinct transport regimes: a tunnel-dominated SIS-like regime, a temperature-driven crossover, and a complex weak-link regime. A unified Usadel-based description connects these regimes through the self-consistent pair potential of the intermediate s-layer. While for Al-based devices an SIS-like transport regime is observed, a self-consistent calculation of the s/F/S proximity electrode, combined with perturbative tunnel coupling to the outer electrode, accounts for Nb devices with different thickness of the superconducting interlayer. The calculation places the 10-nm-interlayer sample in a proximity-supported, strongly suppressed s state, close to the SInFS limit in which the interlayer is effectively driven normal (\textit{n}). A reduced nonlinear long-junction description captures the same limiting physics. The evolution of I_cR_N(T) thereby provides a direct experimental signature of the three transport regimes. Beyond the fundamental interest, the results establish practical design guidelines: Nb junctions with sufficiently thick s interlayers are well suited for high-speed cryogenic memory elements and tunable superconducting parametric amplifiers, while Al junctions are natural candidates for coherent superconducting quantum circuits

arXiv:2610.20268•Oct 14, 2026•0 citations

Millimeter and submillimeter wave mixers based on superconducting weak links

Janusz Konopka, I. Wolff

Principles of operation of superconducting mixers based on: Superconductor-Insulator-Superconductor (SIS) tunnel junctions, Josephson junctions in high temperature superconductors and on superconducting hot-electron-microbolometers are presented. Most recent results on all types of superconducting mixers, with special attention paid to noise properties is reviewed.

International Conference on Microwaves, Radar & Wireless Communications•Nov 27, 2002•0 citations

Tuning the fundamental periodicity of the current-phase relation in multiterminal diffusive Josephson junctions

Venkat Chandrasekhar

Conventional superconductor/insulator/superconductor (SIS) Josephson junctions, devices where two superconductors are separated by a tunnel barrier are technologically important as elements in quantum circuits, particularly with their key role in superconducting qubits. An important characteristic of Josephson junctions is the relation between the supercurrent Is and the phase difference $ϕ$ between them. For SIS junctions, the current-phase relation is sinusioidal and 2$π$ periodic. Other types of Josephson junctions, where the material between the superconductors is a weak link or a normal metal (N) may have non-sinusoidal current-phase relations that are still 2$π$ periodic. We show here that a multi-terminal diffusive SNS Josephson junction with 4 superconducting contacts can show a current phase relation between two of the contacts that is a superposition of 2$π$ and 4$π$ periodic components whose relative strength is controlled by the phase difference between the other two contacts, becoming 2$π$ or 4$π$ periodic for certain values of this phase difference. This tunability might have applications in tailoring the Hamiltonians of superconducting quantum circuits.

arXiv:2506.08985•Physical review. B./Physical review. B•Sep 3, 2025•1 citation

Semiconductor heterostructure weak links for Josephson and superconducting FET applications

Alan W. Kleinsasser, Thomas Nelson Jackson, George D. Pettit +3 more

Superconductor-normal-superconductor (SNS) weak links using a semiconductor as the normal region are of interest for applications in high frequency Josephson devices and in superconducting field effect transistors. Recently, there has been a revival of interest in materials such as InAs which, in principle, allow true SNS structures without tunneling (Schottky) barriers at the electrodes, In this paper we discuss the requirements for semiconductor SNS Josephson and FET devices and describe the fabrication and characterization of planar SNS weak links in which the normal region is InAs, which is part of a heterostructure consisting of a thin (100 nm) layer of n-InAs grown on undoped GaAs. Nb electrodes defined by electron beam lithography have been made with spacings as small as 260 nm. Preliminary measurements indicate that the devices have good electrical behavior which is well explained by SNS weak link theory, using coherence lengths calculated from measured material parameters. These weak links can be the basis for superconducting FET devices, and have the significant advantage of allowing simple device isolation compared with bulk InAs, which was used in earlier work.

IEEE Transactions on Magnetics•Mar 1, 1987•11 citations

Josephson junctions in charge and phase picture Theory and applications

Juha Hassel

Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.

•Nov 9, 2004•0 citations

SNS and SIS Josephson junctions with dimensions down to the submicron region prepared by a unified technology

Ludwig Fritzsch, H. Elsner, M. Schubert +1 more

Several applications of Josephson junctions (JJs) in low-temperature superconducting circuits such as programmable voltage standards and SFQ logical circuits or SQUID sensors require JJs with sub-µm dimensions. A method for preparing superconductor-isolator-superconductor (SIS) JJs as well as superconductor-normal metal-superconductor (SNS) JJs was developed which allows the preparation of both types of junctions by nearly the same technological process. Titanium is used as the normal metal for the SNS JJ. Ti can be anodically oxidized and a technology similar to the well-tried Nb-Al technology for SIS JJs can be applied to the SNS system, too. By electron-beam exposure of a negative deep UV photoresist (ma-N 2400) a stable resist mask is generated which has to withstand the following three self-aligned process steps: etching of the Nb counterelectrode by RIE, isolation by anodization and lifting of a SiO planarization layer. By this process SNS (Nb-Ti-Nb) and SIS (Nb-Al/AlO x -Nb) Josephson junctions with smallest junction areas of 0.49 µm 2 were prepared and characterized by dc measurements and under the influence of microwave irradiation. The Nb-Ti-Nb junctions have I c R n products of 87 µV. They can be used for programmable Josephson voltage standard circuits at frequencies of 70 GHz.

Superconductor Science and Technology•Nov 1, 1999•9 citations
Josephson elements are cornerstones of cryogenic classical and quantum superconducting technology, owing to their nonlinearity. Two important types of Josephson elements are often considered distinct: the tunnel junction (superconductor-insulator-superconductor, SIS) and the normal weak link (superconductor-normalsuperconductor, SNS) referring to any non-superconducting and non-insulating central region. SNS junctions and SIS junctions have appeared in related technological and basic science contexts over the last decade. In this perspective article, we review correspondences between SISIS junctions and SNS junctions in limiting regimes, in which a single, general energy-phase relationship describes the systems. We show how this insight helped to connect recent bodies of theoretical and experimental work in both systems. We conclude by describing a few important differences that also impact their use in applied contexts.
We present a systematic study of the temperature-dependent transport properties of Nb- and Al-based superconductor--insulator--thin superconductor--ferromagnet--superconductor (SIsFS) Josephson junctions. By varying the superconducting material and the thickness of the intermediate superconducting layer, we identify three distinct transport regimes: a tunnel-dominated SIS-like regime, a temperature-driven crossover, and a complex weak-link regime. A unified Usadel-based description connects these regimes through the self-consistent pair potential of the intermediate s-layer. While for Al-based devices an SIS-like transport regime is observed, a self-consistent calculation of the s/F/S proximity electrode, combined with perturbative tunnel coupling to the outer electrode, accounts for Nb devices with different thickness of the superconducting interlayer. The calculation places the 10-nm-interlayer sample in a proximity-supported, strongly suppressed s state, close to the SInFS limit in which the interlayer is effectively driven normal (\textit{n}). A reduced nonlinear long-junction description captures the same limiting physics. The evolution of I_cR_N(T) thereby provides a direct experimental signature of the three transport regimes. Beyond the fundamental interest, the results establish practical design guidelines: Nb junctions with sufficiently thick s interlayers are well suited for high-speed cryogenic memory elements and tunable superconducting parametric amplifiers, while Al junctions are natural candidates for coherent superconducting quantum circuits
Conventional superconductor/insulator/superconductor (SIS) Josephson junctions, devices where two superconductors are separated by a tunnel barrier are technologically important as elements in quantum circuits, particularly with their key role in superconducting qubits. An important characteristic of Josephson junctions is the relation between the supercurrent Is and the phase difference ϕϕϕ between them. For SIS junctions, the current-phase relation is sinusioidal and 2πππ periodic. Other types of Josephson junctions, where the material between the superconductors is a weak link or a normal metal (N) may have non-sinusoidal current-phase relations that are still 2πππ periodic. We show here that a multi-terminal diffusive SNS Josephson junction with 4 superconducting contacts can show a current phase relation between two of the contacts that is a superposition of 2πππ and 4πππ periodic components whose relative strength is controlled by the phase difference between the other two contacts, becoming 2πππ or 4πππ periodic for certain values of this phase difference. This tunability might have applications in tailoring the Hamiltonians of superconducting quantum circuits.
Superconductor-normal-superconductor (SNS) weak links using a semiconductor as the normal region are of interest for applications in high frequency Josephson devices and in superconducting field effect transistors. Recently, there has been a revival of interest in materials such as InAs which, in principle, allow true SNS structures without tunneling (Schottky) barriers at the electrodes, In this paper we discuss the requirements for semiconductor SNS Josephson and FET devices and describe the fabrication and characterization of planar SNS weak links in which the normal region is InAs, which is part of a heterostructure consisting of a thin (100 nm) layer of n-InAs grown on undoped GaAs. Nb electrodes defined by electron beam lithography have been made with spacings as small as 260 nm. Preliminary measurements indicate that the devices have good electrical behavior which is well explained by SNS weak link theory, using coherence lengths calculated from measured material parameters. These weak links can be the basis for superconducting FET devices, and have the significant advantage of allowing simple device isolation compared with bulk InAs, which was used in earlier work.
Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.
Several applications of Josephson junctions (JJs) in low-temperature superconducting circuits such as programmable voltage standards and SFQ logical circuits or SQUID sensors require JJs with sub-µm dimensions. A method for preparing superconductor-isolator-superconductor (SIS) JJs as well as superconductor-normal metal-superconductor (SNS) JJs was developed which allows the preparation of both types of junctions by nearly the same technological process. Titanium is used as the normal metal for the SNS JJ. Ti can be anodically oxidized and a technology similar to the well-tried Nb-Al technology for SIS JJs can be applied to the SNS system, too. By electron-beam exposure of a negative deep UV photoresist (ma-N 2400) a stable resist mask is generated which has to withstand the following three self-aligned process steps: etching of the Nb counterelectrode by RIE, isolation by anodization and lifting of a SiO planarization layer. By this process SNS (Nb-Ti-Nb) and SIS (Nb-Al/AlO x -Nb) Josephson junctions with smallest junction areas of 0.49 µm 2 were prepared and characterized by dc measurements and under the influence of microwave irradiation. The Nb-Ti-Nb junctions have I c R n products of 87 µV. They can be used for programmable Josephson voltage standard circuits at frequencies of 70 GHz.