Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters
T1 T 1 ¯ = 49 μs and
T2∗ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.
Superconductor qubits typically use aluminum–aluminum oxide tunnel junctions to provide the nonlinear inductance. Junctions with semiconductor barriers make it possible to vary the superconductor material and explore beyond aluminum. We use InAs semiconductor nanowires coated with thin superconducting shells of β-Sn to realize transmon qubits. By tuning the Josephson energy with a gate voltage, we adjust the qubit frequency over a range of 3 GHz. The longest energy relaxation time, T 1 = 27 μs, is obtained at the lowest qubit frequencies, while the longest echo dephasing time, T 2 = 1.8 μs, is achieved at higher frequencies. We assess the possible factors limiting coherence times in these devices and discuss steps to enhance performance through improvements in materials fabrication and circuit design.
Materials improvements in transmon qubits have yielded remarkable advances in qubit lifetimes (T1)and coherence times (T2). However, state-of-the-art superconducting qubits experience temporal fluctuations in their performance, which limit gate fidelities and quantum processor performance. We observe correlated increases in qubit relaxation and dephasing rates that last for minutes to hours, which we call T1 and T2 excursions. Using interleaved lifetime and coherence time measurements, noise spectroscopy, and two-level-system (TLS) spectroscopy, we find that these excursions are caused by single or few strongly-coupled TLS defects that spectrally diffuse into resonance with the qubit frequency. Our measurement protocol provides a powerful tool for understanding the noise sources that cause temporal fluctuations in superconducting qubit performance.
We developed transmon qubits based on epitaxial tunnel junctions and interdigitated capacitors. This multileveled qubit, patterned by use of all-optical lithography, is a step towards scalable qubits with a high integration density. The relaxation time T1 is 0.72−0.86 μs and the ensemble dephasing time T2* is slightly larger than T1. The dephasing time T2 (1.36 μs) is nearly energy-relaxation-limited. Qubit spectroscopy yields weaker level splitting than observed in qubits with amorphous barriers in equivalent-size junctions. The qubit’s inferred microwave loss closely matches the weighted losses of the individual elements (junction, wiring dielectric, and interdigitated capacitor), determined by independent resonator measurements.
Quantum information processing holds the promise of a paradigm shift in computational power for specific problem classes. While contemporary quantum processors operate in the Noisy Intermediate-Scale Quantum (NISQ) regime and remain highly susceptible to errors, ongoing experimental efforts on these near-term devices are crucial for advancing the underlying technology. Among the various hardware implementations, superconducting quantum circuits stand out as one of the most robust architectures for scalable quantum technologies. Nevertheless, the primary bottleneck in these systems is the fragility of quantum information: interactions with the environment inevitably perturb the quantum states, a phenomenon known as decoherence. This rapid loss of stored information imposes a fundamental limit on the time available to reliably execute computations on these devices. Within this context, this thesis focuses on the comprehensive experimental characterization of a planar chip featuring isolated, fixed-frequency superconducting transmon qubits. The measurements were conducted in a cryogenic environment, relying on a dilution refrigerator to maintain the device at millikelvin temperatures. To probe the quantum system under these conditions, custom measurement scripts were developed to operate state-of-the-art microwave control electronics (Keysight Quantum Control System), establishing full control over pulse generation, signal acquisition, and digital demodulation. The experimental workflow systematically mapped the physical properties of the device through a progressive series of characterization steps. Initial spectroscopic techniques probed the coupled resonator-qubit system, identifying its fundamental transition frequencies and relevant energy scales. Building upon these frequency-domain measurements, coherent control was achieved by calibrating resonant microwave pulses to drive single-qubit rotations, enabling the reliable preparation of the qubit in excited or coherent superposition states. Finally, specific time-domain protocols were implemented to evaluate the operational limits of the device. By executing standard pulse sequences, the characteristic decoherence metrics of the system, namely the longitudinal energy relaxation time (T1) and the inhomogeneous dephasing time (T2*), were successfully extracted, providing a quantitative assessment of the qubit's overall performance and establishing a baseline for future implementations of more advanced quantum control protocols.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an
Al/AlOx/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of
ω01=5.0122 GHz and an anharmonicity of
α/2π=−202.4 MHz , corresponding to
EJ/EC≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of
g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of
QL=6127 and a Purcell limit of
T1Purcell≈82 μs . Time-domain measurements yield coherence times of
T1=17.4 μs and
T2∗=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.