Silicon nanomechanical resonators display ultra-long lifetimes at cryogenic temperatures and microwave frequencies. Achieving quantum control of single-phonons in these devices has so far relied on nonlinearities enabled by coupling to ancillary qubits. In this work, we propose using atomic forces to realize a silicon nanomechanical qubit without coupling to an ancillary qubit. The proposed qubit operates at 60 MHz with a single-phonon level anharmonicity of 5 MHz. We present a circuit quantum acoustodynamics architecture where electromechanical resonators enable dispersive state readout and multi-qubit operations. The combination of strong anharmonicity, ultrahigh mechanical quality factors, and small footprints achievable in this platform could enable quantum-nonlinear phononics for quantum information processing and transduction.
Silicon nanomechanical resonators display ultra-long lifetimes at cryogenic temperatures and microwave frequencies. Achieving quantum control of single-phonons in these devices has so far relied on nonlinearities enabled by coupling to ancillary qubits. In this work, we propose using atomic forces to realize a silicon nanomechanical qubit without coupling to an ancillary qubit. The proposed qubit operates at 60 MHz with a single-phonon level anharmonicity of 5 MHz. We present a circuit quantum acoustodynamics architecture where electromechanical resonators enable dispersive state readout and multi-qubit operations. The combination of strong anharmonicity, ultrahigh mechanical quality factors, and small footprints achievable in this platform could enable quantum-nonlinear phononics for quantum information processing and transduction.
Although strong nonlinear interactions between quantized excitations are an important resource for quantum technologies based on bosonic oscillator modes, most electromagnetic and mechanical nonlinearities are far too weak to allow for nonlinear effects to be observed at the single-quantum level. This limitation has been overcome in electromagnetic resonators by coupling them to other strongly nonlinear quantum systems such as atoms and superconducting qubits. We demonstrate the realization of the single-phonon nonlinear regime in a solid-state mechanical system. The single-phonon anharmonicity in our system exceeds the decoherence rate by a factor of 6.8, allowing us to use it as a mechanical qubit and demonstrate initialization, readout, and single-qubit gates. Our approach provides a powerful quantum acoustics platform for quantum simulations, sensing, and information processing.
Mechanical resonators are emerging as a powerful platform for quantum information science, offering compactness, long coherence times, and scalability. In this thesis, we explore a circuit quantum acoustodynamics (cQAD) device based on integrating high-overtone bulk acoustic resonators (HBARs) with superconducting transmon qubits. This architecture harnesses the dense mode structure and high quality factors of HBARs alongside the fast control and high-fidelity readout of superconducting qubits. We demonstrate essential building blocks for phonon-based quantum operations, including direct measurements of phonon number and parity, as well as Wigner tomography of nonclassical states. We also realize Schrödinger cat states in a mechanical resonator with an effective mass of 16.2 micrograms and investigate their decoherence dynamics. Additionally, we demonstrate the creation and coherent control of a mechanical qubit enabled by strong single-phonon anharmonicity. Building on these capabilities, we introduce the concept of Acoustic Resonator-Based Quantum Circuits (ARQCs), where multiple phonon modes act as encoded qubits and a single transmon mediates interactions between them. This architecture supports compact, reconfigurable, and highly scalable quantum circuits capable of controlling hundreds of modes within a single device. Our experimental and simulation results position the cQAD platform as a compelling and versatile candidate for future quantum information processing technologies.
Mechanical oscillators have been demonstrated with very high quality factors over a wide range of frequencies.They also couple to a wide variety of fields and forces, making them ideal as sensors.The realization of a mechanically based quantum bit could therefore provide an important new platform for quantum computation and sensing.Here, we show that by coupling one of the flexural modes of a suspended carbon nanotube to the charge states of a double quantum dot defined in the nanotube, it is possible to induce sufficient anharmonicity in the mechanical oscillator so that the coupled system can be used as a mechanical quantum bit.However, these results can only be achieved when the device enters the ultrastrong coupling regime.We discuss the conditions for the anharmonicity to appear, and we show that the Hamiltonian can be mapped onto an anharmonic oscillator, allowing us to work out the energy level structure and find how decoherence from the quantum dot and the mechanical oscillator is inherited by the qubit.Remarkably, the dephasing due to the quantum dot is expected to be reduced by several orders of magnitude in the coupled system.We outline qubit control, readout protocols, the realization of a CNOT gate by coupling two qubits to a microwave cavity, and finally how the qubit can be used as a static-force quantum sensor.
We describe the design for a scalable, solid-state quantum-information-processing architecture based on the integration of GHz-frequency nanomechanical resonators with Josephson tunnel junctions, which has the potential for demonstrating a variety of single- and multiqubit operations critical to quantum computation. The computational qubits are eigenstates of large-area, current-biased Josephson junctions, manipulated and measured using strobed external circuitry. Two or more of these phase qubits are capacitively coupled to a high-quality-factor piezoelectric nanoelectromechanical disk resonator, which forms the backbone of our architecture, and which enables coherent coupling of the qubits. The integrated system is analogous to one or more few-level atoms (the Josephson junction qubits) in an electromagnetic cavity (the nanomechanical resonator). However, unlike existing approaches using atoms in electromagnetic cavities, here we can individually tune the level spacing of the ``atoms'' and control their ``electromagnetic'' interaction strength. We show theoretically that quantum states prepared in a Josephson junction can be passed to the nanomechanical resonator and stored there, and then can be passed back to the original junction or transferred to another with high fidelity. The resonator can also be used to produce maximally entangled Bell states between a pair of Josephson junctions. Many such junction-resonator complexes can be assembled in a hub-and-spoke layout, resulting in a large-scale quantum circuit. Our proposed architecture combines desirable features of both solid-state and cavity quantum electrodynamics approaches, and could make quantum-information processing possible in a scalable, solid-state environment.
Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Qi≈4.3×104. Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.
Mechanical qubits offer unique advantages over other qubit platforms, primarily in terms of coherence time and possibilities for enhanced sensing applications, but their potential is constrained by the inherently weak nonlinearities and small anharmonicity of nanomechanical resonators. We propose overcoming this shortcoming by using squeezed-Fock states of phonons in a parametrically driven nonlinear mechanical oscillator. We find that, under two-phonon driving, squeezed-Fock states become eigenstates of a Kerr-nonlinear mechanical oscillator, featuring an energy spectrum with exponentially enhanced and tunable anharmonicity, such that the transitions to higher energy states are exponentially suppressed. This enables us to encode the mechanical qubit within the ground and first excited squeezed-Fock states of the driven mechanical oscillator. This kind of mechanical qubit is termed mechanical squeezed-Fock qubit. We also show that our mechanical qubit can serve as a quantum sensor for weak forces, with its resulting sensitivity increased by at least one order of magnitude over that of traditional mechanical qubits. The proposed mechanical squeezed-Fock qubit provides a powerful quantum phonon platform for quantum sensing and information processing.