Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2008.10524 · Physical Review X

Proposal for a Nanomechanical Qubit

F. Pistolesi, Andrew N. Cleland, Adrian Bachtold

Published Aug 3, 2021• 59 citations
arXivHTMLPDF

Abstract

Mechanical oscillators have been demonstrated with very high quality factors over a wide range of frequencies.They also couple to a wide variety of fields and forces, making them ideal as sensors.The realization of a mechanically based quantum bit could therefore provide an important new platform for quantum computation and sensing.Here, we show that by coupling one of the flexural modes of a suspended carbon nanotube to the charge states of a double quantum dot defined in the nanotube, it is possible to induce sufficient anharmonicity in the mechanical oscillator so that the coupled system can be used as a mechanical quantum bit.However, these results can only be achieved when the device enters the ultrastrong coupling regime.We discuss the conditions for the anharmonicity to appear, and we show that the Hamiltonian can be mapped onto an anharmonic oscillator, allowing us to work out the energy level structure and find how decoherence from the quantum dot and the mechanical oscillator is inherited by the qubit.Remarkably, the dephasing due to the quantum dot is expected to be reduced by several orders of magnitude in the coupled system.We outline qubit control, readout protocols, the realization of a CNOT gate by coupling two qubits to a microwave cavity, and finally how the qubit can be used as a static-force quantum sensor.

DOI
10.1103/physrevx.11.031027

Related papers

Quantum tomography of suspended carbon nanotubes

Jialiang Chang, Nicholas Pietrzak, Cristian Staii

We propose and analyze an all-mechanical route to coherent control and quantum-state reconstruction of the fundamental flexural mode of a suspended carbon nanotube (CNT) operated in the anharmonic (Duffing/Kerr). A nearby atomic force microscope (AFM) provides a single, localized actuator that applies calibrated, time-dependent forces to the CNT. In the presence of mechanical anharmonicity this enables spectrally selective control of the lowest vibrational transition and thus supports effective two-level protocols such as Rabi oscillations and Ramsey interferometry. The same actuator also implements phase-space displacements required for Wigner function tomography via displaced-parity sampling, thereby unifying control and tomography without optical heating and without dedicated on-chip microwave drive lines at the CNT resonator. We develop explicit pulse sequences and a master equation framework that connect experimentally accessible signals to energy relaxation and phase coherence times and to parity-based quantum signatures, including negative regions of the Wigner function. The approach is compatible with multiple readout modalities, including direct AFM-based detection and dispersive coupling to superconducting circuitry such as Cooper-pair box, and/or a microwave cavity. Together, these techniques provide complete access to populations, coherence, and parity within a single device architecture. This minimal scheme provides a practical route to all-mechanical quantum control and state-resolved characterization of decoherence in mesoscopic mechanical systems.

arXiv:2509.01858•Physical review. B./Physical review. B•Apr 1, 2026•3 citations

A Nanomechanical Atomic Force Qubit

Shahin Jahanbani, Zi-Huai Zhang, Hua, Binhan +5 more

Silicon nanomechanical resonators display ultra-long lifetimes at cryogenic temperatures and microwave frequencies. Achieving quantum control of single-phonons in these devices has so far relied on nonlinearities enabled by coupling to ancillary qubits. In this work, we propose using atomic forces to realize a silicon nanomechanical qubit without coupling to an ancillary qubit. The proposed qubit operates at 60 MHz with a single-phonon level anharmonicity of 5 MHz. We present a circuit quantum acoustodynamics architecture where electromechanical resonators enable dispersive state readout and multi-qubit operations. The combination of strong anharmonicity, ultrahigh mechanical quality factors, and small footprints achievable in this platform could enable quantum-nonlinear phononics for quantum information processing and transduction.

arXiv:2407.15387•Jul 22, 2024•0 citations

Scanning Probe Control, Quantum Dynamics, and Dispersive Readout of Suspended Carbon Nanotube Resonators

Cristian Staii

Suspended carbon nanotubes (CNTs) offer promising opportunities for quantum nanomechanics owing to their small effective mass, strong electrostatic tunability, and mechanical nonlinearity. We develop a unified theoretical framework for coherent control and readout of a suspended CNT driven by an atomic force microscope (AFM) tip and capacitively coupled to a Cooper-pair box (CPB). We first derive the linear and nonlinear Duffing response of the CNT and quantify the effects of AFM force gradients, tip-position fluctuations, and voltage noise on mechanical stability, dephasing, and heating. These results establish operating conditions for coherent actuation with limited backaction. We then quantize the Duffing oscillator, derive its Kerr anharmonicity, and identify the requirements for selective control of individual vibrational transitions. Estimates of thermal occupation and active cooling illustrate the constraints for CNT modes spanning frequencies from 54 MHz to 5.37 GHz. Finally, we derive the CNT--CPB interaction and its dispersive limit, showing how phonon number and parity can be mapped onto the CPB through Ramsey interferometry and detected using quantum-capacitance readout. The resulting framework identifies the conditions under which localized AFM actuation, nonlinear quantum dynamics, and superconducting state-resolved detection can operate within a single CNT device.

arXiv:2611.09581•Nov 6, 2026•0 citations

Scanning Probe Control, Quantum Dynamics, and Dispersive Readout of Suspended-Carbon Nanotube Resonators

Cristian Staii

Suspended-carbon nanotubes combine small motional mass, high mechanical frequency, strong electrostatic tunability, and appreciable mechanical nonlinearity. These properties make them attractive for quantum nanomechanics, but they also place unusually stringent requirements on actuation and readout because a nearby control element can perturb the mechanical dynamics that it is intended to control or probe. We develop a unified analysis of a suspended-carbon nanotube (CNT) driven by a voltage-biased atomic force microscope (AFM) tip and coupled capacitively to a Cooper-pair box (CPB). First, we derive the driven linear and Duffing response of the CNT and identify how the static AFM tip force, force gradient, tip-position noise, and voltage noise enter the mechanical frequency, dephasing, and heating rates. This establishes explicit inequalities that quantify the trade-off between control strength and actuation-induced backaction during pulsed operation. Second, we quantize the Duffing mode, derive the Kerr coefficient using a fixed convention for the quartic potential, and connect spectral selectivity to drive bandwidth and leakage. Thermal occupations and active cooling estimates are given for representative nanotube modes from 54 MHz to 5.37 GHz. In the resolved-sideband limit, the required cooling cooperativity is modest for a 221 MHz mode but substantially larger for a 54 MHz mode at 10 mK. Third, we derive the CNT-CPB coupling from displacement-dependent gate capacitance, transform the charge-basis interaction to the qubit eigenbasis, and obtain the Jaynes–Cummings and dispersive Hamiltonians by controlled approximations. We then combine Ramsey phase accumulation that depends on the phonon number with quantum-capacitance readout of the CPB. The resulting framework identifies three experimentally distinct requirements: sufficiently weak AFM backaction during control, sufficiently strong mechanical anharmonicity for spectral selectivity, and sufficiently rapid dispersive mapping and superconducting readout for state-resolved detection. These results provide a quantitative operating framework for integrating local scanning-probe actuation with superconducting readout in CNT quantum electromechanics.

Condensed Matter•Nov 7, 2026•0 citations

Tunable nonlinear electromechanics at the zero-point motion scale

Christoffer B. Møller, Roger Tormo-Queralt, Elsa Vázquez-Rodríguez +13 more

Nonlinearity at the scale of zero-point motion opens new possibilities for the control and readout of nanomechanical systems, but achieving this remains a formidable challenge. Here we demonstrate that ultrastrong coupling (USC) between a nanotube mechanical oscillator and a double-quantum-dot electronic two-level system enables a mechanical Kerr (Duffing) nonlinearity at the zero-point motion scale. In the dispersive regime, this large coupling yields a mechanical anharmonicity of $α= 1.4\%$ - three orders of magnitude larger than in previous work - while preserving the predominantly mechanical nature of the lowest energy states. We further demonstrate a purely quadratic cavity-based continuous readout of the mechanical motion. This continuous nonlinear optomechanical readout is enforced by a double-quantum dot symmetry, which can be broken by gate tuning to introduce a large linear transduction. These results establish a tunable USC platform that enables strong mechanical anharmonicity and nonlinear continuous readout at the zero-point motion scale.

quant-pharXiv:2607.21764•Jul 27, 2026

Mechanical Squeezed-Fock Qubit: Towards Quantum Weak-Force Sensing

Yi‐Fan Qiao, Jun‐Hong An, Fuli Li

Mechanical qubits offer unique advantages over other qubit platforms, primarily in terms of coherence time and possibilities for enhanced sensing applications, but their potential is constrained by the inherently weak nonlinearities and small anharmonicity of nanomechanical resonators. We propose overcoming this shortcoming by using squeezed-Fock states of phonons in a parametrically driven nonlinear mechanical oscillator. We find that, under two-phonon driving, squeezed-Fock states become eigenstates of a Kerr-nonlinear mechanical oscillator, featuring an energy spectrum with exponentially enhanced and tunable anharmonicity, such that the transitions to higher energy states are exponentially suppressed. This enables us to encode the mechanical qubit within the ground and first excited squeezed-Fock states of the driven mechanical oscillator. This kind of mechanical qubit is termed mechanical squeezed-Fock qubit. We also show that our mechanical qubit can serve as a quantum sensor for weak forces, with its resulting sensitivity increased by at least one order of magnitude over that of traditional mechanical qubits. The proposed mechanical squeezed-Fock qubit provides a powerful quantum phonon platform for quantum sensing and information processing.

arXiv:2507.13161•Physical Review Letters•Jan 8, 2026•6 citations
Mechanical oscillators have been demonstrated with very high quality factors over a wide range of frequencies.They also couple to a wide variety of fields and forces, making them ideal as sensors.The realization of a mechanically based quantum bit could therefore provide an important new platform for quantum computation and sensing.Here, we show that by coupling one of the flexural modes of a suspended carbon nanotube to the charge states of a double quantum dot defined in the nanotube, it is possible to induce sufficient anharmonicity in the mechanical oscillator so that the coupled system can be used as a mechanical quantum bit.However, these results can only be achieved when the device enters the ultrastrong coupling regime.We discuss the conditions for the anharmonicity to appear, and we show that the Hamiltonian can be mapped onto an anharmonic oscillator, allowing us to work out the energy level structure and find how decoherence from the quantum dot and the mechanical oscillator is inherited by the qubit.Remarkably, the dephasing due to the quantum dot is expected to be reduced by several orders of magnitude in the coupled system.We outline qubit control, readout protocols, the realization of a CNOT gate by coupling two qubits to a microwave cavity, and finally how the qubit can be used as a static-force quantum sensor.
We propose and analyze an all-mechanical route to coherent control and quantum-state reconstruction of the fundamental flexural mode of a suspended carbon nanotube (CNT) operated in the anharmonic (Duffing/Kerr). A nearby atomic force microscope (AFM) provides a single, localized actuator that applies calibrated, time-dependent forces to the CNT. In the presence of mechanical anharmonicity this enables spectrally selective control of the lowest vibrational transition and thus supports effective two-level protocols such as Rabi oscillations and Ramsey interferometry. The same actuator also implements phase-space displacements required for Wigner function tomography via displaced-parity sampling, thereby unifying control and tomography without optical heating and without dedicated on-chip microwave drive lines at the CNT resonator. We develop explicit pulse sequences and a master equation framework that connect experimentally accessible signals to energy relaxation and phase coherence times and to parity-based quantum signatures, including negative regions of the Wigner function. The approach is compatible with multiple readout modalities, including direct AFM-based detection and dispersive coupling to superconducting circuitry such as Cooper-pair box, and/or a microwave cavity. Together, these techniques provide complete access to populations, coherence, and parity within a single device architecture. This minimal scheme provides a practical route to all-mechanical quantum control and state-resolved characterization of decoherence in mesoscopic mechanical systems.
Silicon nanomechanical resonators display ultra-long lifetimes at cryogenic temperatures and microwave frequencies. Achieving quantum control of single-phonons in these devices has so far relied on nonlinearities enabled by coupling to ancillary qubits. In this work, we propose using atomic forces to realize a silicon nanomechanical qubit without coupling to an ancillary qubit. The proposed qubit operates at 60 MHz with a single-phonon level anharmonicity of 5 MHz. We present a circuit quantum acoustodynamics architecture where electromechanical resonators enable dispersive state readout and multi-qubit operations. The combination of strong anharmonicity, ultrahigh mechanical quality factors, and small footprints achievable in this platform could enable quantum-nonlinear phononics for quantum information processing and transduction.
Suspended carbon nanotubes (CNTs) offer promising opportunities for quantum nanomechanics owing to their small effective mass, strong electrostatic tunability, and mechanical nonlinearity. We develop a unified theoretical framework for coherent control and readout of a suspended CNT driven by an atomic force microscope (AFM) tip and capacitively coupled to a Cooper-pair box (CPB). We first derive the linear and nonlinear Duffing response of the CNT and quantify the effects of AFM force gradients, tip-position fluctuations, and voltage noise on mechanical stability, dephasing, and heating. These results establish operating conditions for coherent actuation with limited backaction. We then quantize the Duffing oscillator, derive its Kerr anharmonicity, and identify the requirements for selective control of individual vibrational transitions. Estimates of thermal occupation and active cooling illustrate the constraints for CNT modes spanning frequencies from 54 MHz to 5.37 GHz. Finally, we derive the CNT--CPB interaction and its dispersive limit, showing how phonon number and parity can be mapped onto the CPB through Ramsey interferometry and detected using quantum-capacitance readout. The resulting framework identifies the conditions under which localized AFM actuation, nonlinear quantum dynamics, and superconducting state-resolved detection can operate within a single CNT device.
Suspended-carbon nanotubes combine small motional mass, high mechanical frequency, strong electrostatic tunability, and appreciable mechanical nonlinearity. These properties make them attractive for quantum nanomechanics, but they also place unusually stringent requirements on actuation and readout because a nearby control element can perturb the mechanical dynamics that it is intended to control or probe. We develop a unified analysis of a suspended-carbon nanotube (CNT) driven by a voltage-biased atomic force microscope (AFM) tip and coupled capacitively to a Cooper-pair box (CPB). First, we derive the driven linear and Duffing response of the CNT and identify how the static AFM tip force, force gradient, tip-position noise, and voltage noise enter the mechanical frequency, dephasing, and heating rates. This establishes explicit inequalities that quantify the trade-off between control strength and actuation-induced backaction during pulsed operation. Second, we quantize the Duffing mode, derive the Kerr coefficient using a fixed convention for the quartic potential, and connect spectral selectivity to drive bandwidth and leakage. Thermal occupations and active cooling estimates are given for representative nanotube modes from 54 MHz to 5.37 GHz. In the resolved-sideband limit, the required cooling cooperativity is modest for a 221 MHz mode but substantially larger for a 54 MHz mode at 10 mK. Third, we derive the CNT-CPB coupling from displacement-dependent gate capacitance, transform the charge-basis interaction to the qubit eigenbasis, and obtain the Jaynes–Cummings and dispersive Hamiltonians by controlled approximations. We then combine Ramsey phase accumulation that depends on the phonon number with quantum-capacitance readout of the CPB. The resulting framework identifies three experimentally distinct requirements: sufficiently weak AFM backaction during control, sufficiently strong mechanical anharmonicity for spectral selectivity, and sufficiently rapid dispersive mapping and superconducting readout for state-resolved detection. These results provide a quantitative operating framework for integrating local scanning-probe actuation with superconducting readout in CNT quantum electromechanics.
Nonlinearity at the scale of zero-point motion opens new possibilities for the control and readout of nanomechanical systems, but achieving this remains a formidable challenge. Here we demonstrate that ultrastrong coupling (USC) between a nanotube mechanical oscillator and a double-quantum-dot electronic two-level system enables a mechanical Kerr (Duffing) nonlinearity at the zero-point motion scale. In the dispersive regime, this large coupling yields a mechanical anharmonicity of α=1.4%α= 1.4\%α=1.4% - three orders of magnitude larger than in previous work - while preserving the predominantly mechanical nature of the lowest energy states. We further demonstrate a purely quadratic cavity-based continuous readout of the mechanical motion. This continuous nonlinear optomechanical readout is enforced by a double-quantum dot symmetry, which can be broken by gate tuning to introduce a large linear transduction. These results establish a tunable USC platform that enables strong mechanical anharmonicity and nonlinear continuous readout at the zero-point motion scale.
Mechanical qubits offer unique advantages over other qubit platforms, primarily in terms of coherence time and possibilities for enhanced sensing applications, but their potential is constrained by the inherently weak nonlinearities and small anharmonicity of nanomechanical resonators. We propose overcoming this shortcoming by using squeezed-Fock states of phonons in a parametrically driven nonlinear mechanical oscillator. We find that, under two-phonon driving, squeezed-Fock states become eigenstates of a Kerr-nonlinear mechanical oscillator, featuring an energy spectrum with exponentially enhanced and tunable anharmonicity, such that the transitions to higher energy states are exponentially suppressed. This enables us to encode the mechanical qubit within the ground and first excited squeezed-Fock states of the driven mechanical oscillator. This kind of mechanical qubit is termed mechanical squeezed-Fock qubit. We also show that our mechanical qubit can serve as a quantum sensor for weak forces, with its resulting sensitivity increased by at least one order of magnitude over that of traditional mechanical qubits. The proposed mechanical squeezed-Fock qubit provides a powerful quantum phonon platform for quantum sensing and information processing.