Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2406.08066 · Physical Review Applied

Two-tone spectroscopy of high-frequency quantum circuits with a Josephson emitter

A. Peugeot, H. Riechert, S. Annabi, Léo Balembois, Marius Villiers, Emmanuel Flurin, J. Griesmar, Everton Arrighi, Jean-Damien Pillet, Landry Bretheau

Published Dec 6, 2024• 8 citations
arXivHTMLPDF

Abstract

We perform two-tone spectroscopy on quantum circuits, where high-frequency radiation is generated by a voltage-biased superconductor-normal-superconductor Josephson junction and detection is carried out by an ancillary microwave resonator. We implement this protocol on two different systems, a transmon qubit and a $\ensuremath{\lambda}/4$ resonator. We demonstrate that this two-tone Josephson spectroscopy operates well into the millimeter-wave band, reaching frequencies larger than 80 GHz, and is well suited for probing highly coherent quantum systems.

DOI
10.1103/physrevapplied.22.064027

Related papers

Superconducting on-chip spectrometer for mesoscopic quantum systems

J. Griesmar, Ramiro H. Rodriguez, Vincent Benzoni +4 more

Spectroscopy is a powerful tool to probe physical, chemical, and biological systems. Recent advances in microfabrication have introduced novel, intriguing mesoscopic quantum systems including superconductor-semiconductor hybrid devices and topologically nontrivial electric circuits. A sensitive, general-purpose spectrometer to probe the energy levels of these systems is lacking. We propose an on-chip absorption spectrometer functioning well into the millimeter wave band which is based on a voltage-biased superconducting quantum interference device. We demonstrate the capabilities of the spectrometer by coupling it to a variety of superconducting systems, probing phenomena such as quasiparticle and plasma excitations. We perform spectroscopy of a microscopic tunable nonlinear resonator in the 40--50-GHz range and measure transitions to highly excited states. The Josephson junction spectrometer, with outstanding frequency range, sensitivity, and coupling strength will enable new experiments in linear and nonlinear spectroscopy of novel mesoscopic systems.

arXiv:2106.02632•Physical Review Research•Oct 28, 2021•11 citations

Millimetre-wave radiation from arrays of high- Josephson junctions

Gerhard Kunkel, Ronald H. Ono, Alexander M. Klushin

We have used a novel high-frequency circuit incorporating a resonant parallel-bias scheme to demonstrate millimetre-wave radiation from arrays of high-temperature superconductor Josephson junctions. The power of a five-junction array was measured with a detector junction on chip, and the Josephson oscillations of a ten-junction array were detected directly with a radiometer from 73 GHz to 123 GHz.

Superconductor Science and Technology•Apr 1, 1996•11 citations

Josephson voltage standard microwave circuit driven at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende +5 more

We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.

Journal de Physique IV (Proceedings)•Jun 1, 1994•0 citations

Microwave-induced amplitude- and phase-tunable qubit-resonator coupling in circuit quantum electrodynamics

Sina Zeytinoǧlu, Marek Pechal, S. Berger +3 more

In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.

arXiv:1502.03692•Physical Review A•Apr 30, 2015•105 citations

Resonant escape in Josephson tunnel junctions under millimeter-wave irradiation

J. N. Kämmerer, Sergei Masis, K. Hambardzumyan +5 more

The microwave-driven dynamics of the superconducting phase difference across a Josephson junction is now widely employed in superconducting qubits and quantum circuits. With their typical energy level separation frequency being several GHz, cooling these quantum devices to the ground state requires temperatures below 100 mK. Pushing the operation frequency of superconducting qubits up may allow for operation of superconducting qubits at 1 K and even higher temperatures. Here, we present measurements of the switching currents of niobium/aluminum–aluminum oxide/niobium Josephson junctions in the presence of millimeter-wave radiation at frequencies above 100 GHz. The observed switching current distributions display clear double-peak structures, which result from the resonant escape of the Josephson phase from a stationary state. We show that the data can be well explained by the strong-driving model including the irradiation-induced suppression of the potential barrier. While still being measured in the quasi-classical regime, our results point toward a feasibility of operating phase qubits around 100 GHz.

arXiv:2411.15048•Applied Physics Letters•Apr 28, 2025•0 citations

Frequency-tuned microwave photon counter based on a superconductive quantum interferometer

V. I. Shnyrkov, Wu Yangcao, A. A. Soroka +2 more

Various types of single-photon counters operating in infrared, ultraviolet, and optical wavelength ranges are successfully used to study electromagnetic fields, analyze radiation sources, and solve problems in quantum informatics. However, their operating principles become ineffective at millimeter band, S-band, and ultra-high frequency bands of wavelengths due to the decrease in quantum energy by 4–5 orders of magnitude. Josephson circuits with discrete Hamiltonians and qubits are a good foundation for the construction of single-photon counters at these frequencies. This paper presents a frequency-tuned microwave photon counter based on a single-junction superconducting quantum interferometer and flux qutrit. The control pulse converts the interferometer into a two-level system for resonance absorption of photons. Decay of the photon-induced excited state changes the magnetic flux in the interferometer, which is measured by a SQUID magnetometer. Schemes for recording the magnetic flux using a DC SQUID or ideal parametric detector, based on a qutrit with high-frequency excitation, are discussed. It is shown that the counter consisting of an interferometer with a Josephson junction and a parametric detector demonstrates high performance and is capable of detecting single photons in a microwave band.

Low Temperature Physics•Mar 1, 2018•16 citations
We perform two-tone spectroscopy on quantum circuits, where high-frequency radiation is generated by a voltage-biased superconductor-normal-superconductor Josephson junction and detection is carried out by an ancillary microwave resonator. We implement this protocol on two different systems, a transmon qubit and a \ensuremathλ/4\ensuremath{\lambda}/4\ensuremathλ/4 resonator. We demonstrate that this two-tone Josephson spectroscopy operates well into the millimeter-wave band, reaching frequencies larger than 80 GHz, and is well suited for probing highly coherent quantum systems.
Spectroscopy is a powerful tool to probe physical, chemical, and biological systems. Recent advances in microfabrication have introduced novel, intriguing mesoscopic quantum systems including superconductor-semiconductor hybrid devices and topologically nontrivial electric circuits. A sensitive, general-purpose spectrometer to probe the energy levels of these systems is lacking. We propose an on-chip absorption spectrometer functioning well into the millimeter wave band which is based on a voltage-biased superconducting quantum interference device. We demonstrate the capabilities of the spectrometer by coupling it to a variety of superconducting systems, probing phenomena such as quasiparticle and plasma excitations. We perform spectroscopy of a microscopic tunable nonlinear resonator in the 40--50-GHz range and measure transitions to highly excited states. The Josephson junction spectrometer, with outstanding frequency range, sensitivity, and coupling strength will enable new experiments in linear and nonlinear spectroscopy of novel mesoscopic systems.
We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.
The microwave-driven dynamics of the superconducting phase difference across a Josephson junction is now widely employed in superconducting qubits and quantum circuits. With their typical energy level separation frequency being several GHz, cooling these quantum devices to the ground state requires temperatures below 100 mK. Pushing the operation frequency of superconducting qubits up may allow for operation of superconducting qubits at 1 K and even higher temperatures. Here, we present measurements of the switching currents of niobium/aluminum–aluminum oxide/niobium Josephson junctions in the presence of millimeter-wave radiation at frequencies above 100 GHz. The observed switching current distributions display clear double-peak structures, which result from the resonant escape of the Josephson phase from a stationary state. We show that the data can be well explained by the strong-driving model including the irradiation-induced suppression of the potential barrier. While still being measured in the quasi-classical regime, our results point toward a feasibility of operating phase qubits around 100 GHz.
Various types of single-photon counters operating in infrared, ultraviolet, and optical wavelength ranges are successfully used to study electromagnetic fields, analyze radiation sources, and solve problems in quantum informatics. However, their operating principles become ineffective at millimeter band, S-band, and ultra-high frequency bands of wavelengths due to the decrease in quantum energy by 4–5 orders of magnitude. Josephson circuits with discrete Hamiltonians and qubits are a good foundation for the construction of single-photon counters at these frequencies. This paper presents a frequency-tuned microwave photon counter based on a single-junction superconducting quantum interferometer and flux qutrit. The control pulse converts the interferometer into a two-level system for resonance absorption of photons. Decay of the photon-induced excited state changes the magnetic flux in the interferometer, which is measured by a SQUID magnetometer. Schemes for recording the magnetic flux using a DC SQUID or ideal parametric detector, based on a qutrit with high-frequency excitation, are discussed. It is shown that the counter consisting of an interferometer with a Josephson junction and a parametric detector demonstrates high performance and is capable of detecting single photons in a microwave band.