Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Low Temperature Physics

Frequency-tuned microwave photon counter based on a superconductive quantum interferometer

V. I. Shnyrkov, Wu Yangcao, A. A. Soroka, Oleg G. Turutanov, V. Yu. Lyakhno

Published Mar 1, 2018• 16 citations
Publisher

Abstract

Various types of single-photon counters operating in infrared, ultraviolet, and optical wavelength ranges are successfully used to study electromagnetic fields, analyze radiation sources, and solve problems in quantum informatics. However, their operating principles become ineffective at millimeter band, S-band, and ultra-high frequency bands of wavelengths due to the decrease in quantum energy by 4–5 orders of magnitude. Josephson circuits with discrete Hamiltonians and qubits are a good foundation for the construction of single-photon counters at these frequencies. This paper presents a frequency-tuned microwave photon counter based on a single-junction superconducting quantum interferometer and flux qutrit. The control pulse converts the interferometer into a two-level system for resonance absorption of photons. Decay of the photon-induced excited state changes the magnetic flux in the interferometer, which is measured by a SQUID magnetometer. Schemes for recording the magnetic flux using a DC SQUID or ideal parametric detector, based on a qutrit with high-frequency excitation, are discussed. It is shown that the counter consisting of an interferometer with a Josephson junction and a parametric detector demonstrates high performance and is capable of detecting single photons in a microwave band.

DOI
10.1063/1.5024538

Related papers

Scheme for Flux-Qubit-Based Microwave Single-Photon Counter with Weak Continuous Measurement

V. I. Shnyrkov, Wu Yangcao, Oleg G. Turutanov +2 more

Single-photon detectors are crucial elements of prospective quantum devices and techniques such as quantum communication systems, quantum computers, quantum radars, astrophysical detectors, etc. The detection of individual photons in microwave range is a much larger challenge as compared to that of in optics due to the quanta energy difference of 4 to 5 orders of magnitude which requires a quite different approach. So "artificial atoms" with discrete energy spectrum such as superconducting qubits are used here exploiting resonance transitions between their quantum states. A scheme incorporating a flux qubit with controllable spectrum as a single photon counter for 3-12 GHz range and weak continuous readout circuit based on rf superconducting quantum interferometer (SQUID) with UHF pumping is proposed and analyzed. High SQUID pumping frequency (about 500 MHz) along with using cooled microwatt HEMT preamplifier provides the measurement frequency band of up to 30 MHz while substantially diminishing the back-action effect.

IEEE Ukrainian Microwave Week (UkrMW)•Sep 21, 2020•1 citation

An RF SQUID readout for a flux qubit-based microwave single photon counter

V. I. Shnyrkov, Andrii P. Shapovalov, V. Yu. Lyakhno +3 more

Abstract An analysis of the measurement of the magnetic flux in superconducting qubits based on RF SQUIDs was carried out with an 800 MHz bandwidth low-power-consumption cryogenic high-electron-mobility transistor amplifier. The preliminary experimental results obtained at temperatures 2 K and 4 K for RF SQUIDs in hysteretic, and in two non-hysteretic, regimes with a pump frequency of about 30 MHz are discussed. Parameters of RF SQUIDs in the hysteretic and non-hysteretic modes are analyzed within the framework of the resistively and capacitively shunted junction model for Josephson junctions. Its sensitivity at a temperature of 30 mK and frequency band (speed) are calculated and optimized to read the states of a flux qubit used as a single microwave photon counter. It is shown that an RF SQUID, operated in an adiabatic non-hysteretic mode for qubit readout, allows us to minimize its back-action effect and the dark count rate. This is due to the absence of Josephson generation, the small amplitude of the resonator electromagnetic field, and the selection of the pump frequency that does not coincide with the characteristic frequencies of the flux qubit.

Superconductor Science and Technology•Jan 6, 2023•10 citations

Quantum Microwave Photodetection Using Superconducting Josephson Circuits.

Brendan Osberg

Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.

•Sep 3, 2009•0 citations

On the possibility of faster detection of magnetic flux changes in a single-photon counter by RF SQUID with MoRe–Si(W)–MoRe junction

Andrii P. Shapovalov, Volodymyr E. Shaternik, Oleg G. Turutanov +2 more

The nonhysteretic mode of a RF SQUID with a MoRe–Si(W)–MoRe Josephson junction is analyzed in order to detect the states of a single-photon counter based on a superconducting quantum interferometer with a discrete Hamiltonian. The absorption of a photon with 10 GHz frequency brings the counter to the excited level causing tunnelling into the adjacent potential well and a change in the magnetic flux in the interferometer, which can be detected by the SQUID magnetometer. Measurement of a quantum system requires minimization of the back action of the signal read-out channel at the counter, high sensitivity, and speed of the magnetometer. The MoRe–Si(W)–MoRe contacts are optimized for various concentrations of tungsten (W) in silicon (Si) and barrier layer thickness. It is shown that using MoRe–Si(W)–MoRe contacts with a tungsten concentration of approximately 11% for the RF SQUID at excitation frequencies of ∼1 GHz makes it practically an ideal parametric upward frequency shifter with noise determined by the cooled amplifier.

Low Temperature Physics•Jul 1, 2019•7 citations

Microwave Photon Counter Based on Josephson Junctions

Guilhem J. Ribeill, U. Patel, Joseph Suttle +1 more

The strong interaction of superconducting integrated circuits with microwave photons forms the basis of circuit quantum electrodynamics (cQED), an attractive paradigm for scalable quantum computing and a test bed for quantum optics in the strong coupling regime [1–6]. While singlephoton detectors are an important component of the standard quantum optics toolbox [7], they have not played a role in cQED, as there are no microwave photon counters currently available. In the search for a microwave component that will emulate the nonlinearity of traditional optical photon counters, it is natural to consider the Josephson junction—a nonlinear, nondissipative superconducting circuit element with tunable microwave-frequency transitions. There has been recent interest in the development of on-chip detectors to probe the microwave radiation emitted by mesoscopic quantum circuits [8–14], including proposals to utilize Josephson circuits as photon counters in the context of cQED [8,9]. This study represents the first experimental measurement of the coincidence counting statistics of microwave photons. We exploit microwaveinduced transitions between discrete energy levels in a Josephson junction to realize an efficient, versatile microwave detector. Moreover, we use a parallelized detector circuit to probe the counting statistics of both coherent and thermal microwave sources. Acircuitdiagramofthesingle-channeldetectorisshown in Fig. 1(a). The Josephson junction is current biased near thecriticalcurrent I0.Thejunctionpotentialenergyisgiven by Uð� Þ¼� I

Bulletin of the American Physical Society•Mar 19, 2013•0 citations

Detector of microwave photon pairs based on a Josephson photomultiplier

E. V. Stolyarov, Roman Baskov

We propose a viable design of a microwave two-photon threshold detector. In essence, the considered scheme is an extension of the existing single-photon detector—a Josephson photomultiplier (JPM)—an absorbing microwave detector based on a capacitively shunted rf superconducting quantum interference device (SQUID). To implement a two-photon threshold detector, we utilize a dimer of resonators—two lumped-element resonators interacting via an asymmetric dc SQUID, with one of the resonators capacitively coupled to the JPM. By specific tuning of the resonator frequencies and the external flux through the dc SQUID coupler, we engineer a nonperturbative two-photon coupling between the resonators. This coupling results in the coherent conversion of a photon pair from one resonator into a single photon in another resonator, enabling selective response to quantum states with at least two photons. We also consider an extended coupler design that allows on-demand switching of two-photon coupling. In addition, we propose the modified JPM design to improve its performance. Our calculations demonstrate that, for realistic circuit parameters, we can achieve more than 99 % fidelity of photon pair detection in less than 50 ns. The considered scheme may serve as a building block for the implementation of efficient photon-number-resolving detectors in circuit QED architecture.

arXiv:2504.15950•Physical Review Research•Aug 28, 2025•3 citations
Various types of single-photon counters operating in infrared, ultraviolet, and optical wavelength ranges are successfully used to study electromagnetic fields, analyze radiation sources, and solve problems in quantum informatics. However, their operating principles become ineffective at millimeter band, S-band, and ultra-high frequency bands of wavelengths due to the decrease in quantum energy by 4–5 orders of magnitude. Josephson circuits with discrete Hamiltonians and qubits are a good foundation for the construction of single-photon counters at these frequencies. This paper presents a frequency-tuned microwave photon counter based on a single-junction superconducting quantum interferometer and flux qutrit. The control pulse converts the interferometer into a two-level system for resonance absorption of photons. Decay of the photon-induced excited state changes the magnetic flux in the interferometer, which is measured by a SQUID magnetometer. Schemes for recording the magnetic flux using a DC SQUID or ideal parametric detector, based on a qutrit with high-frequency excitation, are discussed. It is shown that the counter consisting of an interferometer with a Josephson junction and a parametric detector demonstrates high performance and is capable of detecting single photons in a microwave band.
Single-photon detectors are crucial elements of prospective quantum devices and techniques such as quantum communication systems, quantum computers, quantum radars, astrophysical detectors, etc. The detection of individual photons in microwave range is a much larger challenge as compared to that of in optics due to the quanta energy difference of 4 to 5 orders of magnitude which requires a quite different approach. So "artificial atoms" with discrete energy spectrum such as superconducting qubits are used here exploiting resonance transitions between their quantum states. A scheme incorporating a flux qubit with controllable spectrum as a single photon counter for 3-12 GHz range and weak continuous readout circuit based on rf superconducting quantum interferometer (SQUID) with UHF pumping is proposed and analyzed. High SQUID pumping frequency (about 500 MHz) along with using cooled microwatt HEMT preamplifier provides the measurement frequency band of up to 30 MHz while substantially diminishing the back-action effect.
Abstract An analysis of the measurement of the magnetic flux in superconducting qubits based on RF SQUIDs was carried out with an 800 MHz bandwidth low-power-consumption cryogenic high-electron-mobility transistor amplifier. The preliminary experimental results obtained at temperatures 2 K and 4 K for RF SQUIDs in hysteretic, and in two non-hysteretic, regimes with a pump frequency of about 30 MHz are discussed. Parameters of RF SQUIDs in the hysteretic and non-hysteretic modes are analyzed within the framework of the resistively and capacitively shunted junction model for Josephson junctions. Its sensitivity at a temperature of 30 mK and frequency band (speed) are calculated and optimized to read the states of a flux qubit used as a single microwave photon counter. It is shown that an RF SQUID, operated in an adiabatic non-hysteretic mode for qubit readout, allows us to minimize its back-action effect and the dark count rate. This is due to the absence of Josephson generation, the small amplitude of the resonator electromagnetic field, and the selection of the pump frequency that does not coincide with the characteristic frequencies of the flux qubit.
Superconducting circuits have recently become a major contender for the implementation of quantum computers owing to their compatibility with existing microchip fabrication technologies. Their utility stems largely from their ability to be coupled with resonant cavities for the purposes of trapping and relaying microwave radiation. Because of this feature, scientists are able to transmit quantum information from a variety of qubits. Though quantum-limited amplifiers exist, unfortunately there currently exists no microwave photon counter capable of single shot quantum detection. Hence, we use superconducting circuits with Josephson junctions to design a microwave photon detector based on a modified phase qubit that exhibits a bandwidth of 4GHz, and a detection fidelity of 98%. We use metastable barrier transition (driven by incident photons) to create an avalanche effect analogous to current photo-diodes. Linear coupling of the junction flux with the radiation permits photodetection from an arbitrary quantum source in the GHz range. We show the device to be robust to changes in drive frequency, temporal photon width, and resonator quality factor, and we optimize our device with respect to these parameters. We show the device to be stable over the necessary time scales, and yet sensitive enough to accurately measure photons on demand.
The nonhysteretic mode of a RF SQUID with a MoRe–Si(W)–MoRe Josephson junction is analyzed in order to detect the states of a single-photon counter based on a superconducting quantum interferometer with a discrete Hamiltonian. The absorption of a photon with 10 GHz frequency brings the counter to the excited level causing tunnelling into the adjacent potential well and a change in the magnetic flux in the interferometer, which can be detected by the SQUID magnetometer. Measurement of a quantum system requires minimization of the back action of the signal read-out channel at the counter, high sensitivity, and speed of the magnetometer. The MoRe–Si(W)–MoRe contacts are optimized for various concentrations of tungsten (W) in silicon (Si) and barrier layer thickness. It is shown that using MoRe–Si(W)–MoRe contacts with a tungsten concentration of approximately 11% for the RF SQUID at excitation frequencies of ∼1 GHz makes it practically an ideal parametric upward frequency shifter with noise determined by the cooled amplifier.
The strong interaction of superconducting integrated circuits with microwave photons forms the basis of circuit quantum electrodynamics (cQED), an attractive paradigm for scalable quantum computing and a test bed for quantum optics in the strong coupling regime [1–6]. While singlephoton detectors are an important component of the standard quantum optics toolbox [7], they have not played a role in cQED, as there are no microwave photon counters currently available. In the search for a microwave component that will emulate the nonlinearity of traditional optical photon counters, it is natural to consider the Josephson junction—a nonlinear, nondissipative superconducting circuit element with tunable microwave-frequency transitions. There has been recent interest in the development of on-chip detectors to probe the microwave radiation emitted by mesoscopic quantum circuits [8–14], including proposals to utilize Josephson circuits as photon counters in the context of cQED [8,9]. This study represents the first experimental measurement of the coincidence counting statistics of microwave photons. We exploit microwaveinduced transitions between discrete energy levels in a Josephson junction to realize an efficient, versatile microwave detector. Moreover, we use a parallelized detector circuit to probe the counting statistics of both coherent and thermal microwave sources. Acircuitdiagramofthesingle-channeldetectorisshown in Fig. 1(a). The Josephson junction is current biased near thecriticalcurrent I0.Thejunctionpotentialenergyisgiven by Uð� Þ¼� I
We propose a viable design of a microwave two-photon threshold detector. In essence, the considered scheme is an extension of the existing single-photon detector—a Josephson photomultiplier (JPM)—an absorbing microwave detector based on a capacitively shunted rf superconducting quantum interference device (SQUID). To implement a two-photon threshold detector, we utilize a dimer of resonators—two lumped-element resonators interacting via an asymmetric dc SQUID, with one of the resonators capacitively coupled to the JPM. By specific tuning of the resonator frequencies and the external flux through the dc SQUID coupler, we engineer a nonperturbative two-photon coupling between the resonators. This coupling results in the coherent conversion of a photon pair from one resonator into a single photon in another resonator, enabling selective response to quantum states with at least two photons. We also consider an extended coupler design that allows on-demand switching of two-photon coupling. In addition, we propose the modified JPM design to improve its performance. Our calculations demonstrate that, for realistic circuit parameters, we can achieve more than 99 % fidelity of photon pair detection in less than 50 ns. The considered scheme may serve as a building block for the implementation of efficient photon-number-resolving detectors in circuit QED architecture.